SavedAdd your journal

Journals / Çukurova Üniversitesi Mühendislik Fakültesi dergisi / 2021 / Cilt: 36 - Sayı: 3

The Investigation of Corrosion Performance and Durability of Hydroxyapatite-Coated Titanium Implants and the Effect of Antibiotic Additives

Hidroksiapatit Kaplı Titanyum İmplantların Korozyon Performansı ve Dayanıklılığının ve Antibiyotik Katkı Maddelerinin Etkisinin Araştırılması

Demet YAZICI
Başak DOĞRU MERT
Nilgün ALPAY
Pages
735–742
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This situation dealt with the more durable, compact film that had been produced on the surface.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, amoxicillin and potassium clavulanate were loaded as antibiotic additives to hydroxyapatite coating (L-HAP) and were used to enhance biocompatibility and corrosion resistance of titanium (Ti) in- vitro conditions.
📊
Key Findings & Data:The corrosion test was performed using electrochemical impedance spectroscopy (EIS) and polarization curves in artificial saliva at 310 K.
💡
Conclusion & Impact:This situation dealt with the more durable, compact film that had been produced on the surface.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Yapay tükürük · Biyouyumluluk · SILAR

Abstract

In this study, amoxicillin and potassium clavulanate were loaded as antibiotic additives to hydroxyapatite coating (L-HAP) and were used to enhance biocompatibility and corrosion resistance of titanium (Ti) in- vitro conditions. Coating was achieved using the Successive Ionic Layer Adsorption and Reaction (SILAR) process. Scanning electron microscopy (SEM) images, energy dispersive X-ray (EDX) analysis, atomic force microscopy (AFM) images, X-ray diffraction (XRD) analysis, and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the surface morphology. The corrosion test was performed using electrochemical impedance spectroscopy (EIS) and polarization curves in artificial saliva at 310 K. Furthermore the quantum chemical parameters of amoxicillin and potassium clavulanate were investigated and associated with the adsorption ability of these molecules. Results revealed that the corrosion performance of Ti was improved by L-HAP, which had a lower anodic current density and better corrosion resistance. This situation dealt with the more durable, compact film that had been produced on the surface.

Özet

Bu çalışmada, hidroksiapatit kaplamaya (L-HAP) antibiyotik katkı maddesi olarak ilave edilen amoksisilin ve potasyum klavulanat, in-vitro koşullarda titanyumun (Ti) biyouyumluluğunu ve korozyon direncini arttırmak için kullanılmıştır. Kaplama, Ardışık İyonik Katman Adsorpsiyon ve Reaksiyon (SILAR) yöntemi ile gerçekleştirildi. Yüzey morfolojisi, taramalı elektron mikroskobu (SEM), atomik kuvvet mikroskobu (AFM), enerji dağıtıcı X-ışını (EDX) analizi, X-ışını kırınımı (XRD) analizi, azaltılmış toplam yansıma-Fourier dönüşümlü kızılötesi spektroskopisi (ATR- FTIR) ile belirlendi. Korozyon testleri, elektrokimyasal impedans spektroskopisi (EIS) ve polarizasyon eğrileri yardımıyla 310 K'de yapay tükürük çözeltisinde elde edildi. Ayrıca amoksisilin ve potasyum klavulanatın kuantum kimyasal parametreleri araştırıldı ve bu moleküllerin adsorpsiyon yeteneği ile ilişkilendirildi. Sonuçlar, Ti'nin korozyon performansının, daha düşük anodik akım yoğunluğuna ve daha iyi korozyon direncine sahip olan L-HAP ile iyileştirildiğini ortaya koydu. Bu durum, yüzeyde üretilen daha dayanıklı, kompakt film ile ilişkilendirildi.

🔖

Cite This Article

YAZICI, D., MERT, B. D., ALPAY, N. (2022). The Investigation of Corrosion Performance and Durability of Hydroxyapatite-Coated Titanium Implants and the Effect of Antibiotic Additives. Çukurova Üniversitesi Mühendislik Fakültesi dergisi, Cilt: 36 - Sayı: 3, 735–742. https://ajindex.com/articles/485074

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Wang F., Yang C., Duan C., Xiao D., Tang Y., Zhu J., 2015. An Organ-like Titanium Carbide Material (MXene) with Multilayer Structure Encapsulating Hemoglobin for a Mediator-free Biosensor. Journal of the Electrochemical Society, 162(1), 16-21
  2. Chen, S., Tsai, W., Chen, P., Fang, A., Say, W., 2016. Influence of Applied Voltages on Mechanical Properties and In-vitro Performances of Electroplated Hydroxyapatite Coatings on Pure Titanium. Journal of The Electrochemical Society, 163(7), 305-308
  3. Mirzaee, M., Vaezi, M., Palizdar, Y., 2016. Synthesis and Characterization of Silver Doped Hydroxyapatite Nanocomposite Coatings and Evaluation of Their Antibacterial and Corrosion Resistance Properties in Simulated Body Fluid. Materials Science and Engineering, 69, 675-684
  4. Coşkun, M., Karahan, I., Golden, T., 2015. Computer Assisted Corrosion Analysis of Hydroxyapatite Coated CoCrMo Biomedical Alloys. Surface&Coatings Technology, 275, 1-9
  5. Wang, H., Lin, C., Hu, R., Xu, Y., 2007. Electrochemical Deposition of Nano-micro Structured Octacalcium Phosphate/protein Composite Coating on Titanium for Biomedical Applications. ECS Transactions, 3(19), 21-26
  6. Shiha, Y., Tsai, M., Ou, K., 2007. Effect of Oxide Film Containing Fluorine Ion on Enhancing the Initial Osseointegration of Titanium-based Alloy. ECS Transactions, 6(15), 21-33
  7. Matykina, E., Monfort, F., Berkani, A., Skeldon, P., Thompson, G., Gough, J., 2007. Characterization of Spark-anodized Titanium for Biomedical Applications. Journal of the Electrochemical Society, 154(6), 279-285
  8. Ouerd, A., Alemany-Dumont, C., Berthomé, G., Normand, B., Szunerits, S., 2007. I. Electrochemical Characterization of the Metal/Protein Interface. Journal of The Electrochemical Society, 154(6), 593-601
  9. Kim, J., Leez, K., 2009. Dependence of the Morphology of Nanostructured Titanium Oxide on Fluoride Ion Content. Electrochemical and Solid-State Letters, 12(3), 10-12
  10. Dunne, C., Levy, G., Hakimi, O., Aghionb, E., Twomey, B., Stanton, K., 2016. Corrosion Behaviour of Biodegradable Magnesium Alloys with Hydroxyapatite Coatings. Surface& Coatings Technology, 289, 37-44
  11. Pina, V., Amigo, V., Munoz, I., 2016. Microstructural, Electrochemical and Tribo-electrochemical Characterisation of Titanium-copper Biomedical Alloys. Corrosion Science, 109, 115-125
  12. Take, S., Kikuchi, K., Suda, S., Izawa, S., Itoi, Y., 2014. Preparation and Evaluation of Zn Doped HAp Plasma Spray Biocombatible Coatings on Titanium. E