SavedAdd your journal

Journals / Cumhuriyet Science Journal / 2018 / Cilt: 39 - Sayı: 1

Ni-Esaslı Alaşımların (Ni% ≥70) Analizi için Spektroskopik Yöntemlerin Uygulanması

AApplication of Spectroscopic Methods for Analysis of Ni-Based Alloys (Ni% ≥70)

Zeynep AYGUN
Pages
144–151
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In order to understand the surface morphology of samples, scanning electron microscopy; for the elemental compositions of the alloys energy dispersive spectrosopy experiments are carried out at room temperature

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, we investigate the structural and magnetic properties of Ni based alloys which are in the form of NixFeyMoz (x = 0.80; y = 0.15; z = 0.05), NixCryFez (x = 0.70; y = 0.20; z = 0.10), and NixCryAlzCut (x = 0.75; y = 0.20; z = 0.025; t = 0.025) and are prepared by heating the pellet formed samples at high temperature.
📊
Key Findings & Data:For this purpose, electron paramagnetic resonance experiment is performed for analysis of paramagnetic centers of these compositions to see the behaviours of alloys in an external magnetic field. g values are calculated from electron paramagnetic resonance spectra recorded at room temperature.
💡
Conclusion & Impact:In order to understand the surface morphology of samples, scanning electron microscopy; for the elemental compositions of the alloys energy dispersive spectrosopy experiments are carried out at room temperature
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this paper, we investigate the structural and magnetic properties of Ni based alloys which are in the form of NixFeyMoz (x = 0.80; y = 0.15; z = 0.05), NixCryFez (x = 0.70; y = 0.20; z = 0.10), and NixCryAlzCut (x = 0.75; y = 0.20; z = 0.025; t = 0.025) and are prepared by heating the pellet formed samples at high temperature. For this purpose, electron paramagnetic resonance experiment is performed for analysis of paramagnetic centers of these compositions to see the behaviours of alloys in an external magnetic field. g values are calculated from electron paramagnetic resonance spectra recorded at room temperature. Structural features of Nixpositions and line intensities are discussed by the help of x-ray diffraction spectra recorded at room temperature. In order to understand the surface morphology of samples, scanning electron microscopy; for the elemental compositions of the alloys energy dispersive spectrosopy experiments are carried out at room temperature

Özet

Bu çalışmada NixFeyMoz (x = 0.80; y = 0.15; z = 0.05), NixCryFez (x = 0.70; y = 0.20; z = 0.10), and NixCryAlzCut (x = 0.75; y = 0.20; z = 0.025; t = 0.025) şeklinde olan ve yüksek sıcaklıklarda pellet formunda ısıtılarak hazırlanan Ni esaslı alaşımların yapısal ve manyetik özellikleri incelenmiştir. Bu amaçla, dış manyetik alanda alaşımların davranışlarını görmek için bu kompozisyonların paramanyetik özelliklerinin analizinde elektron paramanyetik rezonans deneyi kullanılmıştır. Oda sıcaklığında kaydedilen elektron paramanyetik rezonans spektrumlarından g değerleri hesaplanmıştır. NixFeyMoz, NixCryFez and NixCryAlzCut alaşımlarının yapısal özellikleri x-ışını kırınımı tekniği ile gözlemlenmiştir. Çizgi yerleri ve şiddetleri oda sıcaklığında kaydedilen x-ışını kırınımı spektrumları ile tartışılmıştır. Numunelerin yüzey morfolojisini anlamak için taramalı elektron mikroskobu; alaşımların elementel kompozisyonu için enerji dağılımlı spektroskopi deneyleri oda sıcaklığında yürütülmüştür

🔖

Cite This Article

AYGUN, Z. (2022). Ni-Esaslı Alaşımların (Ni% ≥70) Analizi için Spektroskopik Yöntemlerin Uygulanması. Cumhuriyet Science Journal, Cilt: 39 - Sayı: 1, 144–151. https://ajindex.com/articles/478016

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . Yang Y., Wu P., Wang Q., Wu H., Liu Y., Deng Y., Zhou Y., Shuai C. The Enhancement of Mg Corrosion Resistance by Alloying Mn and LaserMelting. Mater, 9 (2016) 1-10. [2]. Rodrigues, W.C., Espinoza, F.R.M., Schaeffer, L., Knörnschild, G., A study of Al-Mo powder processing as a possible way to corrosion resistent aluminum-alloys. Mater. Res., 12 (2009) 211-218. [3]. Han İ., Demir L., Mass attenuation coefficients, effective atomic and electron numbers of Ti and Ni alloys. Radiat. Measure., 44 (2009) 289-294. [4]. Pervaiz S., Rashid A., Deiab I., Mihai N., Influence of Tool Materials on Machinability of Titanium- and NickelBased Alloys: A Review. Mater. Manufacturing Process., 29 (2014) 219- 252. [5]. Davis JR. Nickel, Cobalt, and Their Alloys ASM Specialty Handbook, (2000) 92-101. [6]. Aygun Z., Aygun M., Karabulut B., Karabulut A., Investigation of non-irradiated and gamma-irradiated Trommel Sieve Waste (TSW) with EPR technique. Ann. Nucl. Energy, 40 (2012) 84-86. [7]. Wang H.L., Yan J.M., Li S.J., Zhang X.W., Jiang Q.,. Noble-metal-free NiFeMo nanocatalyst for hydrogen generation from the decomposition of hydrous hydrazine. J. Mater. Chem. A, 3 (2015) 121-124. [8]. Oleksakova, D., Kollar, P., Fuzer, J., Kusy, M., Roth, S., Polansk, K.,. The influence of mechanical milling on structure and soft magnetic properties of NiFe and NiFeMo alloys. J. Magn. Magn. Mater., 316 (2007) e838-e841. [9]. Banerjee M., Banerjee, R., Majumdar, A.K., Mookerjee, A., Sanyal, B., Nigam, A.K., Magnetism in NiFeMo disordered alloys: Experiment and theory, Physica B, 405 (2010) 4287-4293. [10]. Srinivasan R., Sougandi I., Venkatesan R., Rao P.S., Synthesis and room temperature single crystal EPR studies of a dinickel complex having an {Ni2(mphenoxide)2}2+ unit supported by a macrocyclic ligand environment [Ni2(L)2(OClO3)2] [L = 2-[(4-methylpyridin-2-ylimino)- methyl]-phenol]. Proc. Indian Academia Science (Chem. Sci.), 115 (2003) 91-102. [11]. Manjunatha C., Sunitha D.V., Nagabhushana H., Sharma S.C., Ashoka S., Rao J.L., Nagabhushana B.M., Chakradhar R.P.S., Structural characterization, EPR and thermoluminescence properties of Cd1- xNixSiO3 nanocrystalline phosphors. Mater. Res. Bulletin, 47 (2012) 2306- 2314. [12]. Aygun Z., Aygun M., Spectroscopic analysis of Ahlat stone (ignimbrite) and pumice formed by volcanic activity. Spectrochim. Acta A, 166 (2016) 73–78. [13]. Reddy A.J., Kokila M.K., Nagabhushana H., Chakradhar R.P.S., Shivakumara C., Rao J.L., Nagabhushana B.M.,Str