The surface and phases of alloy wereshowed by SEM, and the composition of each phase was determined by EDX.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In the present work, the electrical resistivity, thermal conductivity and microstructure of the70 at. % Al-15 at. % Sn-15 at. % Zn alloy have been investigated.
📊
Key Findings & Data:The electrical resistivity ofthe alloy was obtained by four-point probe (DC 4PPT) method.
💡
Conclusion & Impact:The surface and phases of alloy wereshowed by SEM, and the composition of each phase was determined by EDX.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In the present work, the electrical resistivity, thermal conductivity and microstructure of the70 at. % Al-15 at. % Sn-15 at. % Zn alloy have been investigated. The electrical resistivity ofthe alloy was obtained by four-point probe (DC 4PPT) method. Electrical resistivitymeasurements are used in conjunction with Wiedeman-Franz (W-F) law and Smith-Palmer(S-P) equations to obtain the thermal conductivity of the alloy. The microstructure parametersof the Al-Sn-Zn ternary alloy were obtained by XRD. The surface and phases of alloy wereshowed by SEM, and the composition of each phase was determined by EDX.
🔖
Cite This Article
BİLLUR, C. A., BİLLUR, C. A. (2022). Determination of the electrical and thermal properties of Al-Sn-Zn alloys. Cumhuriyet Science Journal, Cilt: 41 - Sayı: 4, 908–915. https://ajindex.com/articles/477758
Lucchetta M.C. Saporiti F. Audebert F., Improvement of surface properties of an AlSn-Cu plain bearing alloy produced by rapid solidification. Journal of Alloys and Compounds, 805 (2019) 709-717
Prucka M., Development of an Engine Stop/Start at Idle System. SAE [3] Technical Paper, 2005-01-0069.Tie D. Guan R. Guo N. Zhao Z. Su N. Li J. and Zhang Y., Effects of Different Heat Treatment on Microstructure, Mechanical and Conductive Properties of Continuous Rheo-Extruded Al0.9Si-0.6Mg (wt%) Alloy, Metals, 5 (2015) 648-655
Tie D. Wang Y. Wang X. Guan R. Yan L. Zhang J. Cai Z. Zhao Y. Gao F and Liu H., Microstructure Evolution and Properties Tailoring of Rheo-Extruded Al-Sc-Zr-Fe Conductor via Thermo-Mechanical Treatment, Metals, 13 (2020) 845-10
Salinas D.R. Bessone J.B., Electrochemical Behavior of Al-5%Zn-0.1%Sn Sacrificial Anode in Aggressive Media: Influence of Its Alloying Elements and the Solidification Structure, Corrosion, 47 (1991) 665-673
Kliskic M. Radosevic J. Aljinovic L.J., Behaviour of Al-Sn alloy on the negative side of the open-circuit potential, J. Appl. Electrochem., 24 (1994) 814-818
Gudic S. Radosevic J. Kliskic M., Impedance and transient study of aluminium barrier-type oxide films, J. Appl. Electrochem, 26 (1996) 1027-1035
Gudic S. Radosevic J. Kliskic M., Impedence transient study of barrier ®lms on aluminium and Al-Sn alloys. Proceedings of the Symposium on Passivity and its Breakdown. Electrochemical Society, INC, New Jersey, 1997, p. 689
Bessone J.B. Flamini D.O. Saidman S.B., Comprehensive model for the activation mechanism of Al-Zn Alloys produced by Indium, Corros Sci., 47 (2005) 95-105
Reboul M.C. Gimenez P.H. Rameau J.J., A Proposed Activation Mechanism for Al Anodes, Corrosion, 40 (1984) 366-371
Tamada A. Tamura Y., The electrochemical characteristics of aluminum galvanic anodes in an arctic seawater, Corros. Sci., 34 (1993) 261- 277
Khireche S. Boughrara D. Kadri A. Hamadou L. Benbrahim N., Corrosion mechanism of Al, Al-Zn and Al-Zn-Sn alloys in 3wt.%NaCl solution, Corrosion Science, 87 (2014) 504- 516
El Shayeb H.A. Abd El Wahab F.M. Zein El Abedin S., Electrochemical behaviour of Al, Al-Sn, Al-Zn and Al-Zn-Sn alloys in chloride solutions containing stannous ions, Corrosion Science, 43 (2001) 655-669
Ari M. Saatçi B. Gündüz M. Meydaneri F. Bozoklu M., Microstructure and thermoelectrical transport properties of Cd–Sn alloys, M. Mater. Charact., 59 (2008) 624-63