SavedAdd your journal

Journals / Balkan Journal of Electrical and Computer Engineering / 2022 / Cilt: 10 - Sayı: 3

Wavelength tune of InGaN based blue LEDs by changing indium percentage and operational voltage variables

Bekir GECER
İsmail KIYAK
Pages
323–327
Publication Date
2022-07-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of simulations, we can infer that the high In_x percentage in composition and high voltage makes wavelength gap of an blue LED larger.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Abstract— blue light-emitting-diodes (LEDs) are special and different then the other LEDs due to their high-efficient lighting.
📊
Key Findings & Data:Effects of the different InGaN composition and different voltage values were given in results as comperehansively for 5 different simulations.
💡
Conclusion & Impact:As a result of simulations, we can infer that the high In_x percentage in composition and high voltage makes wavelength gap of an blue LED larger.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:LED · Wavelength · InGaN

Abstract

Abstract— blue light-emitting-diodes (LEDs) are special and different then the other LEDs due to their high-efficient lighting. They have large badgap energy. So gallium nitrides are mostly used during designing blue light. This application focus on the emission properties of a InGaN LED. The emission intensity, energy diagram, spectrum, and efficiency are calculated for an applied voltage. The indium and GaN composition in the blue LED can be varied to control the emission wavelength. In here, composition of InGaN and operational voltage values were varied to control wavelength. Effects of the different InGaN composition and different voltage values were given in results as comperehansively for 5 different simulations. This study is dissimalar than other wevelength studies due to used original parameter values and wavelength compared methods for many situations about InGaN percentage and volatage values. As a result of simulations, we can infer that the high In_x percentage in composition and high voltage makes wavelength gap of an blue LED larger.

🔖

Cite This Article

GECER, B., KIYAK, İ. (2022). Wavelength tune of InGaN based blue LEDs by changing indium percentage and operational voltage variables. Balkan Journal of Electrical and Computer Engineering, Cilt: 10 - Sayı: 3, 323–327. https://ajindex.com/articles/473159

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. S. Nakamura, T. Mukia, and M. Senoh, “Candela-class high-brightness InGaN/AlGaN double-heterostructure blue-light-emitting diodes,” Appl. Phys. Lett., vol. 64, p. 1687, 1994
  2. S.Muthu, J.Gaines, “Red, green and blue LED-based white light source:implementation challenges and control design”, 38th Conference Record of the IEEE Industry Applications Society Annual Meeting (IAS), 2003
  3. Y. Nanishi, “The birth of the blue LED”, Nature Photonics, 2014
  4. K.Meel, P. Mahala, “Design and Fabrication of Multi Quantum well based GaN/InGaN Blue LED”, IOP Conference Series Materials Science and Engineering, 2018
  5. Q. Dai et. al., “Internal quantum efficiency and nonradiative recombination coefficient of GaInN/GaN multiple quantum wells with different dislocation densities,” Appl. Phys. Lett., vol. 94, 111109, 2009
  6. Y.C. Shen, G.O. Mueller, S. Watanabe, N.F. Gardner, A. Munkholm, and M.R. Krames, “Auger recombination in InGaN measured by photoluminescence,” Appl. Phys. Lett., vol. 91, 141101, 2007
  7. S. Han, S. Kim, C. Lee, “Blue-Red LED wavelength shifting strategy for enhanging beta-carotene production from halotolerant microalga, Dunaliella Sanila”, Microbial Systematics and Evolutionary Microbiology, 2018
  8. C. Xiong, F. Jiang, W. Fang, “The characteristics of GaN-based LED on Si substrate”, Journal of Luminscence, pages 185-187, 2007
  9. L. Yu-hong, W. Yo-rong, J. Shang, “Influence of Different Wavelength Blue LED on Human Optical Biorhythm Effect”, 2013
  10. P. Kumar, M. Saheed, Z. Burhanudin, “Performance comparison of one&two quantum wells light emitting diodes simulated with COMSOL Multiphysics”, 6th International Conference on Intelligent and Advanced Systems(ICIAS), 2016
  11. R. Xie, Z. Li, S. Guo, “High Bandwidth GaN-based blue LEDs using Ag-grating and diamond heat sink”, Photonics and Nanostructures-Fundamentals and Applications, 2020
  12. C. Jia, T. Yu, C. Zhong, “Performance improvement of GaN-based LEDs with step stage InGaN/GaN strain relief layers in GaN-based blue LEDs”, Optics Express, volume 21, 2013
  13. L. Deurzen, S. Bharadwaj, “Enhanced efficiency in bottom tunnel junction InGaN blue LEDs”, Light-Emitting Devices, Materials and Applications XXV. Conference, 2021
  14. W. Sun, C. Tien, “Optical Modeling Analysis of Red, Green, and Yellow Phosphors with a Blue LED”, Advances in Condensed Matter Physics, volume 2018.