SavedAdd your journal

Journals / Balkan Journal of Electrical and Computer Engineering / 2022 / Cilt: 10 - Sayı: 3

Semi-conductor Applications to Printed Circuits on Flexible Surfaces

Nazmi EKREN
Ali Samet SARKIN
Pages
273–277
Publication Date
2022-07-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of the electrical and mechanical tests, the best results in terms of reflectance coefficients and surface impedances of RFID tags are on PET surfaces.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The most common type of identification system today is RFID.
📊
Key Findings & Data:With the increase in usage areas, it is also used on metal, wood, paper, and plastic product.
💡
Conclusion & Impact:According to the results of the electrical and mechanical tests, the best results in terms of reflectance coefficients and surface impedances of RFID tags are on PET surfaces.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Flexible surface · Identification · Reflection coefficient

Abstract

The most common type of identification system today is RFID. RFID circuits are used as covered with plastic. With the increase in usage areas, it is also used on metal, wood, paper, and plastic product. In this study, the behavior of the same circuit on different surfaces was investigated. The surface impedance and signal reflection coefficients of RFID tag antennas were investigated based on paper, plastic, and textile surfaces. According to the results of the electrical and mechanical tests, the best results in terms of reflectance coefficients and surface impedances of RFID tags are on PET surfaces. The surface impedance and the reflection coefficients were high on paper surfaces. The lowest values were measured on textile surfaces. According to the results, it has been seen that RFID antenna application on plastic, paper, and textile surfaces is possible and usable.

🔖

Cite This Article

EKREN, N., SARKIN, A. S. (2022). Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering, Cilt: 10 - Sayı: 3, 273–277. https://ajindex.com/articles/473145

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Sweeney P. J., “RFID for Dummies”, 1st Edition, Wiley Publishing Inc., Indiana, USA, 2005. [2] https://www.upu.int/UPU/media/upu/files/postalSolutions/programmesAndServices/standards/S10-12.pdf Online: 15.01.2022 [3] Bilgin, M., “Biyometrik Seçim Sistemi Tasarımı ve Gerçekleştirilmesi”, Thesis of MSc, Selçuk University Institute of Pure and Applied Sciences, Konya, Türkiye, 2008
  2. B. Eren, “Biyometrik Teknolojilerin Etkili Tasarlanması ve Uygulanmasında Yeni Bir Öneri: Multimodel Teknoloji”, Thesis of MSc, Mimar Sinan Fine Arts University Institute of Pure and Applied Sciences, İstanbul, Türkiye, 2009
  3. J.M. Sardroud, “Influence of RFID technology on automated management of construction materials and components”, Scientia Iranica, Vol. 19, No. 3, 2012, pp. 381-392
  4. X. Zhu, S.K. Mukhopadhyay, H. Kurata, “A Review of RFID Technology and Its Managerial Applications in Different Industries” Journal of Engineering and Technology Management, Vol. 29, No. 1, 2012, pp. 152–167
  5. Y. Wang, Y. Huang, Y. Li, P. Cheng, S. Cheng, Q. Liang et. al., “A facile process combined with roll-to-roll flexographic printing and electroless deposition to fabricate RFID tag antenna on paper substrates”, Composites Part B: Engineering, Vol: 224, November 2021, pp. 109194
  6. S. Kalaycı, “Design of A Radio Frequency Identification (Rfid) Antenna”, Thesis of MSc, Middle East Technical University Institute of Pure and Applied Sciences, Ankara, Türkiye, 2009
  7. D. Dobkin, The RF in Rfid Passive UHF Rfid in Practise, 1st Ed., Elsevier, 2008
  8. C. Luo, I. Gil, R. Fernandez-Garcia, “Experimental comparison of three electro-textile interfaces for textile UHF-RFID tags on clothes”, AEU - International Journal of Electronics and Communications, Vol. 146, March 2022, pp.154137
  9. C.D.M. Pena, D.B. Oliveira, E.J. Silva, M.W.B. Silva, “Ultra slim and small UHF RFID tag design for mounting on curved surfaces”, AEU - International Journal of Electronics and Communications, Vol.128, January 2021, pp.153502
  10. E. Hardi, M. Veigt, M. Koerdt, A.S. Herrmann, M. Freitag, “Use of RFID tags for monitoring resin flow and investigation of their influence on the mechanical properties of the composite”, Procedia Manufacturing, Vol.24, 2018, pp.305-310
  11. J. Alarcon, R. Saba, M. Egels, P. Pannier, “A Flexible UHF RFID Tag for Harsh Environments”. IEEE 2012 International Conference on RFID-Technologies and Applications (RFID-TA), France, 2012 [14] A.S. Sarkın, “Esnek Yüzeylerdeki