SavedAdd your journal

Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2017 / Cilt: 13 - Sayı: 4

Static Analysis of Reddy-Bickford Composite and Sandwich Beams via Ritz Method

Armağan Fatih KARAMANLI
Pages
933–942
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is found that the polynomial series with auxiliary functions can be used for the static analysis of the composite and sandwich beams via Ritz method

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper is dedicated to present static behaviour of Reddy-Bickford laminated composite and sandwich beams subjected to various sets of boundary conditions which are simply supported (SS), clamped-simply supported (CS), clamped-clamped (CC) and clamped-free (CF) by using Ritz method.
📊
Key Findings & Data:An analytical solution based on polynomial series including auixiliary functions which are used to satisfy the boundary conditions is developed to solve the studied problem.
💡
Conclusion & Impact:It is found that the polynomial series with auxiliary functions can be used for the static analysis of the composite and sandwich beams via Ritz method
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This paper is dedicated to present static behaviour of Reddy-Bickford laminated composite and sandwich beams subjected to various sets of boundary conditions which are simply supported (SS), clamped-simply supported (CS), clamped-clamped (CC) and clamped-free (CF) by using Ritz method. An analytical solution based on polynomial series including auixiliary functions which are used to satisfy the boundary conditions is developed to solve the studied problem. The polynomial shape functions for axial, transverse deflections and the rotation of the crosssection are presented. The validation and convergence studies are performed by solving symmetric and antisymmetric cross-ply composite beam problems with various boundary conditions and aspect ratios. The numerical results in terms of mid-span deflections, axial and shear stresses are obtained to make comparison with previous studies and to investigate the accuracy of the present study. The effects of fiber angle, lay-up and aspect ratio on displacements and stresses are studied. The static response of the various laminated composite sandwich structures which have symmetric lay-up based on the various boundary conditions, fiber angles and thickness ratios is also studied. It is found that the polynomial series with auxiliary functions can be used for the static analysis of the composite and sandwich beams via Ritz method

🔖

Cite This Article

KARAMANLI, A. F. (2022). Static Analysis of Reddy-Bickford Composite and Sandwich Beams via Ritz Method. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 13 - Sayı: 4, 933–942. https://ajindex.com/articles/472361

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Nguyen, TK, Nguyen, ND, Vo, TP, Thai HT, Trigonometric-series solution for analysis of laminated composite beams, Composite Structures, 2017,160, 142-151
  2. Timoshenko, SP, Goodier, JC, Theory of Elasticity, New York, NY, USA: McGraw-Hill Co. Inc., 1970
  3. Wang, CM, Reddy, JN, Lee, KH, Shear Deformable Beams and Plates Relations with Classical Solutions. Oxford: Elsevier Science Ltd., 2000
  4. Kant, T, Manjunath, BS, Refined theories for composite and sandwich beams with C0 finite elements, Composite Structures, 1989, 33(3), 755–764
  5. Khdeir, AA, Reddy, JN, An exact solution for the bending of thin and thick cross-ply laminated beams, Composite Structures 1997, 37(2), 195–203
  6. Soldatos, KP, Watson, P, A general theory for the accurate stress analysis of homogeneous and laminated composite beams, International Journal of Solids and Structures, 1997, 34(22), 2857–2885
  7. Shi G, Lam, KY, Tay, TE, On efficient finite element modeling of composite beams and plates using higher-order theories and an accurate composite beam element, Compos Struct, 1998, 41(2),159–165
  8. Zenkour, AM, Transverse shear and normal deformation theory for bending analysis of laminated and sandwich elastic beams, Mechanics of Composite Materials & Structures, 1999, 6(3), 267-283
  9. Karama, M, Afaq, KS, Mistou, S, Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity, International Journal of Solids and Structures, 2003, 40(6),1525–1546
  10. Murthy, MVVS, Mahapatra, DR, Badarinarayana, K, Gopalakrishnan, S, A refined higher order finite element for asymmetric composite beams, Composite Structures, 2005, 67(1), 27–35
  11. Vidal, P, Polit, O, A family of sinus finite elements for the analysis of rectangular laminated beams, Composite Structures, 2008, 84(1),56- 72
  12. Aguiar, RM, Moleiro, F, Soares CMM, Assessment of mixed and displacement-based models for static analysis of composite beams of different cross-sections, Composite Structures, 2012, 94 (2),601–616
  13. Nallim, LG, Oller, S, Onate, E, Flores, FG, A hierarchical finite element for composite laminated beams using a refined zigzag theory, Composite Structures, 2017, 163,168–184
  14. Vo, TP, Thai, HT, Nguyen, TK, Lanc, D, Karamanli, A, Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory, Composite Structures, 2017, 176,388-397
  15. Yuan, FG, Miller, RE, A hi