SavedAdd your journal

Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2018 / Cilt: 14 - Sayı: 4

Corrosion and Wear Properties of Cu-TiC Composites Produced by Hot Pressing Technique

Cihan ÖZORAK
Serkan ISLAK
Mehmet AKKAŞ
Pages
465–469
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Corrosion results showed that the corrosion resistance of the compositesdecreased with the increase of TiC content in Cu.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Cu-xTiC (x=0, 1, 5, 10 and 15 wt.%) composites were prepared by hot pressing (HP) technique.
📊
Key Findings & Data:Hardness measurements of the composites were made using a microhardness device.Hardness tests showed that the hardness tends to increase with increasing TiC amount.
💡
Conclusion & Impact:Corrosion results showed that the corrosion resistance of the compositesdecreased with the increase of TiC content in Cu.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Cu-xTiC (x=0, 1, 5, 10 and 15 wt.%) composites were prepared by hot pressing (HP) technique. Themicrostructure, corrosion and wear features of Cu matrix composites (CMCs) were investigated. The wearsurfaces and microstructure of the CMCs were analyzed using SEM-EDS. Phases of samples were identifiedby means of XRD. Hardness measurements of the composites were made using a microhardness device.Hardness tests showed that the hardness tends to increase with increasing TiC amount. Wear properties ofthe CMCs were determined using ball-on-disc method. Significant decreases in wear rates were observed incomposites reinforced with TiC. The corrosion properties of the composites were characterized bypotentiostatic polarization test. Corrosion results showed that the corrosion resistance of the compositesdecreased with the increase of TiC content in Cu. Among the composites, Cu-1% TiC has the best corrosionresistance.

🔖

Cite This Article

ÖZORAK, C., ISLAK, S., AKKAŞ, M. (2022). Corrosion and Wear Properties of Cu-TiC Composites Produced by Hot Pressing Technique. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 14 - Sayı: 4, 465–469. https://ajindex.com/articles/472271

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Lu, J, Shu, S, Qiu, F, Wang, Y, Jiang, Q, Compression properties and abrasive wear behavior of high volume fraction TiCx–TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation, Materials & Design. 2012, 40, 157-162.
  2. Eslami, M, Golestani-fard, F, Saghafian, H, Robin, A, Study on tribological behavior of electrodeposited Cu–Si3N4 composite coatings, Materials & Design. 2014, 58, 557-569.
  3. Selvakumar, N, Vettivel, S.C, Thermal, electrical and wear behavior of sintered Cu–W nanocomposite. Materials & Design. 2013, 46, 16–25.
  4. Vettivel, S.C, Selvakumar, N, Leema, N, Lenin, A.H, Electrical resistivity, wear map and modelling of extruded tungsten reinforced copper composite, Materials & Design. 2014, 56, 791-806. Çelikyürek, İ, Körpe, N.Ö, Ölçer, T, Gürler, R, Microstructure, Properties and Wear Behaviors of (Ni3Al)p Reinforced Cu Matrix Composites, Journal of Materials Science & Technology. 2011, 27(10) 937-943.
  5. Zhang, L. He, X.B, Qu, X.H, Duan, B.H, Lu, X, Qin, M.L, Dry sliding wear properties of high volume fraction SiCp/Cu composites produced by pressureless infiltration, Wear, 2008, 265(11–12), 1848-1856.
  6. Fathy, A, Shehata, F, Abdelhameed, M, Elmahdy, M, Compressive and wear resistance of nanometric alumina reinforced copper matrix composites, Materials & Design. 2012, 36, 100-107.
  7. Kaftelen, H, Ünlü, N, Göller, G, Öveçoğlu, M.L, Henein, H, Comparative processing-structure–property studies of Al–Cu matrix composites reinforced with TiC particulates, Composites Part A: Applied Science and Manufacturing. 2011, 42, 812-824.
  8. Kim, I.Y, Choi, B.J, Kim, Y.J, Lee, Y.Z, Friction and wear behavior of titanium matrix (TiB+TiC) composites, Wear. 2011, 271, 1962-1965.
  9. Cheng, L, Xie, Z, Liu, G, Spark plasma sintering of TiC-based composites toughened by submicron SiC particles, Ceramics International, 2013, 39(5), 5077-5082.
  10. Song, G.M, Wu, Y, Li, Q, Elevated temperature strength and thermal shock behavior of hot-pressed carbon fiber reinforced TiC composites, Journal of the European Ceramic Society. 2002, 22(4), 559-566.
  11. Nemati, N, Khosroshahi, R, Emamy, M, Zolriasatein, A, Investigation of microstructure, hardness and wear properties of Al–4.5 wt.% Cu–TiC nanocomposites produced by mechanical milling, Materials & Design. 2011, 32, 3718-3729. ASTM B311-08, Standard test method for density of powder metallurgy (PM) materials. ASTM; 2008.
  12. Rahimian, M, Ehsani, N, Parvin, N, Baharvandi, H.R, The effect of particle size, sintering temperature and sinter