In the study, the effects of reinforcement materials added to the matrix at different particle sizes and ratios on wear resistance, hardness, and density at different temperatures were examined.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, it was aimed to produce Al-matrix composite materials with B4C-SiC and B4C-Y2O3 particle reinforcement using the Powder Metallurgy (PM) method.
📊
Key Findings & Data:In the composites in which the reinforcement materials were used at different particle sizes and ratios, AA2024 powders were selected as the matrix material.
💡
Conclusion & Impact:In the study, the effects of reinforcement materials added to the matrix at different particle sizes and ratios on wear resistance, hardness, and density at different temperatures were examined.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Composite Material · Particle Size and Ratio · Powder Metallurgy
Abstract
In this study, it was aimed to produce Al-matrix composite materials with B4C-SiC and B4C-Y2O3 particle reinforcement using the Powder Metallurgy (PM) method. In the composites in which the reinforcement materials were used at different particle sizes and ratios, AA2024 powders were selected as the matrix material. The powders were homogeneously mixed and compacted at room temperature under a pressure of 525 MPa. The raw specimens were sintered by keeping them at different temperatures for 45 minutes. The composite materials were subjected to wear tests, and their hardness and density values were investigated. In the study, the effects of reinforcement materials added to the matrix at different particle sizes and ratios on wear resistance, hardness, and density at different temperatures were examined.
DOĞAN, H., MUTLU, Y. (2022). Production of AA2024-Matrix B4C-SiC- and B4C-Y2O3-Particle-Reinforced Composites by Powder Metallurgy and Investigation of Their Mechanical Properties. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 18 - Sayı: 3, 321–330. https://ajindex.com/articles/472098
. Herzallah H., Elsayd A., Shash A., Adly M.,; Effect of carbon nanotubes (CNTs) and silicon carbide (SiC) on mechanical properties of pure Al manufactured by powder metallurgy, j m a t e r r e s t e c h n o l. 2 0 2 0;9(2):1948–1954. https://doi.org/10.1016/j.jmrt.2019.12.027 [2]. Zhang J., Liu Q., Yang S., Chen Z., Liu Q., Jiang Z.,; Microstructural evolution of hybrid aluminum matrix composites reinforced with SiC nanoparticles and graphene/graphite prepared by powder metallurgy, Progress in Natural Science: Materials International 30 (2020) 192–199. https://doi.org/10.1016/j.pnsc.2020.01.024 [3]. Sharma A. K., Bhandari R., Pinca-Bretotean C.,; A systematic overview on fabrication aspects and methods of aluminum metal matrix composites, Materials Today: Proceedings 45 (2021) 4133–4138. https://doi.org/10.1016/j.matpr.2020.11.899 [4]. Fuse K., Badheka V., Patel V., Andersson J.,; Dual sided composite formation in Al 6061/B4C using novel bobbin tool friction stir processing, j o u r n a l of ma t e r i a l s r e s e a r c h and technology 2 0 2 1; 1 3: 1 7 0 9 e1 7 2 1. https://doi.org/10.1016/j.jmrt.2021.05.079 [5]. Devadiga U., Fernandes P.,; Taguchi analysis for sliding wear characteristics of carbon nanotube-flyash reinforced aluminium nanocomposites, Heliyon 7 (2021) e06170. https://doi.org/10.1016/j.heliyon.2021.e06170 [6]. Pul M. ve Baydaroğlu V., B4C/SiC katkılı alüminyum esaslı kompozitlerin mekanik özelliklerin incelenmesi ve balistik performanslarının modellenmesi, Politeknik Dergisi, 23(2): 383-392, (2020). https://doi.org/10.2339/politeknik.525011 [7]. Şenel M. C.,; Toz Metalürjisi Yöntemiyle Üretilen Saf Al ve Al-B4C, Al-Al2O3 Kompozitlerin Mekanik ve Mikroyapı Özelliklerinin Karşılaştırılması, GÜFBED/GUSTIJ (2020) 10 (3): 783-795. https://doi.org/10.17714/gumusfenbil.689359 [8]. Yang J., Chung D.D.L.,; Wear of bauxite-particle reinforced aluminum alloys", Composite Materials Research Laboratory, Furnas Hall, State University of New York, Buffalo, NY 14260(U.S.A.), Wear, 135: 53-65 (1989). https://doi.org/10.1016/0043-1648(89)90095-1 [9]. Abenojar J.; Velasco F.; Martinez M.A.; Optimization of Processing Parameters for The Al + 10% B4C System Obtained by Mechanical Alloying, Journal of Materials Processing Technology 184(2007) 441–446. https://doi.org/10.1016/j.jmatprotec.2006.11.122 [10]. Saessı M., Alızadeh A., Abdollahı A.,; Wear behavior and dry sliding tribological properties of ultra-fine grained Al5083 alloy and boron carbide-r