Journals / Avrupa Bilim ve Teknoloji Dergisi / 2021 / Sayı: 32

An Investigation of Cu2+ Removal by Using Different Types of Modified Starch

Modifie Edilmiş Farklı Nişasta Türleri Kullanılarak Cu2+ Geri Kazanımının İncelenmesi

Pages
557–561
Publication Date
2021-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Moreover, the obtained results were also evaluated according to the Freundlich adsorption isotherm and observed to be compatible with this curve.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, Cu2+ removal from the aqueous solution using different types of starch was examined by the batch method.
📊
Key Findings & Data:The potato starch and corn starch which were modified in different ways were examined to determine the percent removal values of Cu2+ by various trials.
💡
Conclusion & Impact:Moreover, the obtained results were also evaluated according to the Freundlich adsorption isotherm and observed to be compatible with this curve.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Mısır nişastası · Patates nişastası · Freundlich adsorpsiyon izotermi

Abstract

In this study, Cu2+ removal from the aqueous solution using different types of starch was examined by the batch method. The potato starch and corn starch which were modified in different ways were examined to determine the percent removal values of Cu2+ by various trials. The optimum conditions of the experimental procedure were investigated from 10 to 50 mg L-1 as beginning concentration, 4 to 6 as pH, with 5-30 min. as shaking time. 0.15 g modified starch was added 50 mL study solution at room temperature during all different studies. The experimental results offered that thanks to the starch modification with water as an adsorbent, the percent removal values of potato starch 89.58% and corn starch 74.07% were found. Concentration, shaking time, and pH were detected with the optimum values as 20 mg L-1, 20 min, and 6 respectively. Moreover, the obtained results were also evaluated according to the Freundlich adsorption isotherm and observed to be compatible with this curve.

Özet

Bu çalışmada, farklı nişasta türleri kullanılarak sulu çözeltiden Cu2+ katyonlarının geri kazanımı batch yöntemi ile araştırıldı. Farklı prosedürlerle modifiye edilmiş patates nişastası ve mısır nişastası kullanılarak çeşitli denemeler yapıldı ve Cu2+’nin geri kazanım yüzdeleri incelendi. Deneysel çalışmaların optimum parametrelerini bulabilmek amacıyla; başlangıç konsantrasyonu olarak 10 ila 50 mg L-1, pH olarak 4 ila 6 değerleri, çalkalama süresi olarak 5-30 dakika kullanılarak çalışmalar yapıldı. 0,15 g modifiye nişasta, 50 mL çalışma çözeltisine oda sıcaklığında ilave edildi. Nişasta modifikasyonunun su ile yapıldığı deneysel sonuçlara göre, adsorban olarak modifie edilmiş patates nişastası kullanıldığında %89,58, mısır nişastası kullanıldığında %74,07 olarak geri kazanım değerleri bulundu. Konsantrasyon, çalkalama süresi ve pH sırasıyla 20 mg L-1, 20 dakika ve 6 olarak optimum değerler tespit edildi. Ayrıca elde edilen sonuçlar, Freundlich adsorpsiyon izoterm eğrisine göre de değerlendirildi ve bu eğri ile uyumlu olduğu gözlemlendi.

🔖

Cite This Article

BUDAK, T. B. (2021). An Investigation of Cu2+ Removal by Using Different Types of Modified Starch. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 32, 557–561. https://ajindex.com/articles/470157

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Adeli, M., Yamini, Y., & Faraji, M. (2017). Removal of copper, nickel and zinc by sodium dodecyl sulphate coated magnetite nanoparticles from water and wastewater samples. ArabianJournal of Chemistry, 10(1), 514–521.
  2. Bereket, G., Aroguz, A. Z., & Ozel, M. Z. (1997). Removal of Pb(II), Cd(II), Cu(II) and Zn(II) from aqueous solutions by adsorption on bentonite. J. Colloid Interf. Sci., 187, 338–343.
  3. Carmona-Garcia, R., Sanchez-Rivera, M. M., Méndez-Montealvo, G., Garza-Montoya, B., & Bello-Perez, L. A. (2009). Effect of thecross-linked reagent type on some morphological, physicochemical and functional characteristics of banana starch (Musa paradisiaca). Carbohydrate Polymers, 76(1), 117–122.
  4. Donat, R., Akdogan, A., Erdem, E., & Cetisli H. (2005). Thermodynamics of Pb2+ and Ni2+ Adsorption on to natural bentonite from aqueous solutions. J. Colloid Interf. Sci., 286, 43–52.
  5. Dong, A. Q., Yin, Q., Xie, J., & Yin, Y. P. (2009). Rheological and thermal behavior of CaCO3/LDPE blends containing EAA. Polym. Compos., 30(9), 1212–1217.
  6. Dong, A., Xie, J., Wang, W., Yu, L., Liu, Q., & Yin, Y. (2010). A novel method for amino starch preparation and its adsorption for Cu(II) and Cr(VI). Journal of Hazardous Materials, 181(1-3), 448–454.
  7. Gaetke, L. M., & Chow, C. K. (2003). Copper toxicity, oxidative stres and antioxidant nutrients. Toxicol., 189(1-2), 147–163.
  8. Gonzalez-Davila, M., Santana-Casiano, J. M., & Millero, F. J. (1990). The adsorption of Cd(II) and Pb(II) to chitin in seawater. J. Colloid Interf. Sci., 137(1), 102–110.
  9. Gupta, S. S., & Bhattacharyya, K. G. (2006). Removal of Cd(II) from aqueous solution by kaolinite, montmorillonite and their poly(oxozirconium) and tetrabutyl ammonium derivatives. J. Hazard. Mater. B, 128, 247–257.
  10. Khalil, M. I., & Aly, A. (2001). Preparation and evaluation of some cationic starch derivatives as flocculants. Starch/Staerke, 53(2), 84–89.
  11. Kim, B. S., & Lim, S. T. (1999). Removal of heavy metal ions from water by cross-linked carboxymethyl corn starch. Carbohydr. Polym., 39(3), 217–223.
  12. Kobya, M. (2004). Adsorption, kinetic and equilibrium studies of chromium (VI) by hazenut shell activated carbon. Adsorpt. Sci. Technol., 22(1), 51–64.
  13. Kocaoba, S. (2007). Comparison of Amberlite IR 120 and dolomite’s performances for removal of heavy metals. Journal of Hazardous Materials, 147(1-2), 488–496.
  14. Kweon, D. K., Choi, J. K., Kim, E. K., & Lim, S. T. (2001). Adsorption of divalent metal ions by succinylated and oxidized corn starches. Carbo