SavedAdd your journal

Journals / Avrupa Bilim ve Teknoloji Dergisi / 2022 / Sayı: 36

Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating

Kızılötesi Isıtma ile Yüksek Mekanik Özelliklere Sahip Poliamid - Sürekli Karbon Elyaf Takviyeli Termoplastik Kompozit Üretimi

Mert NERGÜN
Nafız ÖNEL
Bahri Barış VATANDAŞ
Altuğ UŞUN
Recep GÜMRÜK
Pages
222–226
Publication Date
2022-05-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A maximum value of 418.99 MPa flexural strength and 52.15 GPa flexural modulus was achieved.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, additive manufacturing is being used in various industries such as automotive, aviation and space, medical applications, etc.
📊
Key Findings & Data:Continuous carbon fiber reinforced thermoplastic (CFRTP) composites are one of the investigated methods in the literature to increase the mechanical properties of the additively manufactured parts.
💡
Conclusion & Impact:A maximum value of 418.99 MPa flexural strength and 52.15 GPa flexural modulus was achieved.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sürekli fiber takviyeli termoplastik kompozit · Eklemeli imalat · Katı ergiyik yığma modelleme

Abstract

Nowadays, additive manufacturing is being used in various industries such as automotive, aviation and space, medical applications, etc. Although additive manufacturing methods offer more freedom in design and manufacturing, they usually have low production speed and mechanical properties. Continuous carbon fiber reinforced thermoplastic (CFRTP) composites are one of the investigated methods in the literature to increase the mechanical properties of the additively manufactured parts. This study utilized a production line based upon the melt impregnation method to obtain continuous carbon fiber reinforced thermoplastic filaments using polyamide and continuous carbon fibers. In the printing process, an infrared heat source was utilized to further increase the mechanical properties by improving the interlaminar bonding. The mechanical properties of the printed parts were measured using three-point bending tests. A significant increase was observed in flexural modulus of elasticity and flexural strength with infrared heaters at low printing speeds. A maximum value of 418.99 MPa flexural strength and 52.15 GPa flexural modulus was achieved.

Özet

Günümüzde eklemeli imalat, otomotiv, havacılık ve uzay, medikal uygulamalar vb. gibi çeşitli endüstrilerde kullanılmaktadır. Eklemeli imalat yöntemleri tasarım ve imalatta daha fazla özgürlük sunsa da genellikle düşük üretim hızı ve mekanik özelliklere sahiptir. Sürekli karbon elyaf takviyeli termoplastik kompozitler, eklemeli imalat ile üretilen parçaların mekanik özelliklerini artırmak için literatürde araştırılan yöntemlerden biridir. Bu çalışmada, poliamid ve sürekli karbon fiber kullanılarak sürekli karbon fiber takviyeli termoplastik filamentler elde etmek için eriyik emprenyene yöntemine dayalı bir üretim hattı kullanılmıştır. Baskı işleminde, katmanlar arası dayanımı geliştirerek mekanik özellikleri daha da artırmak için bir kızılötesi ısıtıcı kullanıldı. Basılan parçaların mekanik özellikleri, üç nokta eğme testleri kullanılarak ölçülmüştür. Kızılötesi ısıtıcılar ile düşük baskı hızlarında eğilme elastisite modülü ve eğilme mukavemetinde önemli bir artış gözlemlendi. Maksimum 418.99 MPa eğilme mukavemeti ve 52.15 GPa eğilme modülü değerine ulaşıldı.

🔖

Cite This Article

NERGÜN, M., ÖNEL, N., VATANDAŞ, B. B., UŞUN, A., GÜMRÜK, R. (2022). Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 36, 222–226. https://ajindex.com/articles/469754

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Blakey-Milner, Byron, Paul Gradl, Glen Snedden, Michael Brooks, Jean Pitot, Elena Lopez, Martin Leary, Filippo Berto, and Anton du Plessis. 2021. “Metal Additive Manufacturing in Aerospace: A Review.” Materials and Design 209: 110008. https://doi.org/10.1016/j.matdes.2021.110008. Chacón, J. M., M. A. Caminero, E. García-Plaza, and P. J. Núñez. 2017. “Additive Manufacturing of PLA Structures Using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties and Their Optimal Selection.” Materials and Design 124: 143–57. https://doi.org/10.1016/j.matdes.2017.03.065.
  2. Fayazfar, Haniyeh, Mehrnaz Salarian, Allan Rogalsky, Dyuti Sarker, Paola Russo, Vlad Paserin, and Ehsan Toyserkani. 2018. “A Critical Review of Powder-Based Additive Manufacturing of Ferrous Alloys: Process Parameters, Microstructure and Mechanical Properties.” Materials and Design 144: 98–128. https://doi.org/10.1016/j.matdes.2018.02.018.
  3. Ganesh Sarvankar, Shruti, and Sanket Nandaram Yewale. 2019. “Additive Manufacturing in Automobile Industry.” International Journal of Research in Aeronautical and Echanical Engineering 7 (4): 1–10.
  4. Ghoshal, Sushanta. 2017. “Polymer/Carbon Nanotubes (CNT) Nanocomposites Processing Using Additive Manufacturing (Three-Dimensional Printing) Technique: An Overview.” Fibers 5 (4). https://doi.org/10.3390/fib5040040.
  5. Heidari-Rarani, M., M. Rafiee-Afarani, and A. M. Zahedi. 2019. “Mechanical Characterization of FDM 3D Printing of Continuous Carbon Fiber Reinforced PLA Composites.” Composites Part B: Engineering 175 (October 2018): 107147. https://doi.org/10.1016/j.compositesb.2019.107147.
  6. Hu, Qingxi, Yongchao Duan, Haiguang Zhang, Dali Liu, Biao Yan, and Fujun Peng. 2018. “Manufacturing and 3D Printing of Continuous Carbon Fiber Prepreg Filament.” Journal of Materials Science 53 (3): 1887–98. https://doi.org/10.1007/s10853-017-1624-2.
  7. Kok, Y., X. P. Tan, P. Wang, M. L.S. Nai, N. H. Loh, E. Liu, and S. B. Tor. 2018. “Anisotropy and Heterogeneity of Microstructure and Mechanical Properties in Metal Additive Manufacturing: A Critical Review.” Materials and Design 139: 565–86. https://doi.org/10.1016/j.matdes.2017.11.021.
  8. Li, Nanya, Yingguang Li, and Shuting Liu. 2016. “Rapid Prototyping of Continuous Carbon Fiber Reinforced Polylactic Acid Composites by 3D Printing.” Journal of Materials Processing Technology 238: 218–25. https://doi.org/10.1016/j.jmatprotec.2016.07.025.
  9. Li, Yan, Zuying Feng, Lijing Huang, Khamis Essa, Emiliano Bilotti, Han Zhang, Ton