Journals / Bor Dergisi / 2018 / Cilt: 3 - Sayı: 2

Synthesis of lantanit doped borate nano particles with combustion method and Investigation of luminescence properties

Yanma yöntemi ile lantanit katkılı borat nano taneciklerin sentezi ve lüminesans özelliklerinin incelenmesi

Pages
79–86
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the obtained PL spectra, it has been found that increasing the co-activator concentrations leads to a decrease in the intensity of radiation, contrary to the increasing direction of the emission intensity.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, luminescent NaCa4-2x(BO3)3: xA1,A2 (A1:A2, Eu: Dy, Nd), (x= 0.03, 0.05 ve 0.07) structures borate particles were synthesized using different lanthanides (Eu, Dy, Nd).
📊
Key Findings & Data:It is generally believed that the phosphorus of Eu2+ is due to the 4f to 5d transition.
💡
Conclusion & Impact:According to the obtained PL spectra, it has been found that increasing the co-activator concentrations leads to a decrease in the intensity of radiation, contrary to the increasing direction of the emission intensity.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this work, luminescent NaCa4-2x(BO3)3: xA1,A2 (A1:A2, Eu: Dy, Nd), (x= 0.03, 0.05 ve 0.07) structures borate particles were synthesized using different lanthanides (Eu, Dy, Nd). An easy, inexpensive and efficient combustion method has been used to synthesize lanthanide-doped luminescent materials. The effects of photoluminescence (PL) spectroscopy on the radiant intensities of lanthanides, trap depths and activators and co-activators were investigated in the synthesized materials. It is generally believed that the phosphorus of Eu2+ is due to the 4f to 5d transition. Structural analyzes were performed by X-ray diffraction (XRD), FTIR, Scanning Electron Microscopy (SEM) analyzes. When the damping times of the crystal structure and the compounds are examined according to the addition ratios of the different activators, it has been revealed that each activator influences the afterglow time and decay curve of the different additive ratios. Optimum ratios were determined for each compound. Structural properties and on light emisssion intensity of the Eu-doped compounds with the most intense luminescence were measured. According to the obtained PL spectra, it has been found that increasing the co-activator concentrations leads to a decrease in the intensity of radiation, contrary to the increasing direction of the emission intensity.

Özet

Bu çalışmada, farklı lantanitler (Eu, Dy, Nd) kullanılararak, lüminesans özellikliNaCa4-2x(BO3)3: xA1,A2 (A1:A2, Eu: Dy,Nd), (x= 0,03, 0,05 ve 0,07) yapısında borattanecikler sentezlenmiştir. Lantanit katkılı lüminesans maddelerin sentezlenmesiiçin, bugüne kadar bir çok çalışmada kullanılan katı hal yöntemi dışında, dahakolay, ucuz ve verimli olan yanma yöntemi kullanılmıştır. Sentezlenen maddelerde,fotolüminesans (PL) spektroskopisi yöntemi kullanılarak katkılanan lantanitlerin,tuzak derinliklerinin ve (aktivatör ve ko-aktivatörlerin) derişimlerinin emisyon şiddetiüzerine etkisi incelenmiştir. Çoğunlukla Eu2+’nin fosforesansının 4f-5d geçişindenkaynaklandığı düşünülmektedir. Yapısal analizler X ışını kırınımı (XRD), FTIR,Taramalı Elektron Mikroskobu (SEM) analizleri ile yapılmıştır. Farklı aktivatörlerinkatkı oranlarına göre, kristal yapı ve bileşiklerin sönüm süreleri incelendiğinde, herbir aktivatörün, farklı katkı oranlarının emisyon şiddeti ve sönüm sürelerini etkilediğiortaya konmuştur. En şiddetli ışıma yapan Eu katkılı bileşiklerin, yapısal özelliklerive emisyon şiddetleri ölçü mleri yapılmıştır. Elde edilen PL spektrumlarına göre, koaktivatörkonsantrasyonlarının arttırılmasının emisyon şiddetinin artırıcı yönün tamtersine, ışıma şiddetinde azalmaya yol açtığı görülmüş tür.

🔖

Cite This Article

IŞIK, S., HALEFOĞLU, Y. Z. (2022). Synthesis of lantanit doped borate nano particles with combustion method and Investigation of luminescence properties. Bor Dergisi, Cilt: 3 - Sayı: 2, 79–86. https://ajindex.com/articles/467458

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Becker P., Borate materials in nonlinear optics, Adv. Mater., 10, 979‒992, 1998.
  2. Chen C., Lin Z., Wang Z., The development of new borate- based UV nonlinear optical crystals, Appl. Phys. B, 80, 1‒25, 2005.
  3. Aka G., Brenier A., Self-frequency conversion in nonlinear laser crystals, Optic Mater., 22, 89‒94, 2003.
  4. Wu L., Chen X., Dai Li L., Xu Y., Zhao M., Synthesis and ab initio X-ray powder diffraction structure of the new alkali and alkali earth metal borate NaCa(BO3), Acta Cryst., C61 i32, 2005.
  5. Sun J., Lian Z., Shena G., Shen D., Blue–white–orange color-tunable luminescence of Ce3+/Mn2+ co-doped NaCaBO3 via energy transfer: potential single-phase white-light-emitting phosphors, RSC Adv., 3, 18395, 2013.
  6. Chen C., Wu Y., Li R., Growth of large Mo O single 18 52 crystals by a vapor phase method, J. Crys. Growth, 99, 708‒715, 1990.
  7. Fan T. Y., Huang C. E., Hu B. Q., Eckhardt R. C., Fan Y. X., Bayer R. L., Feigelson R. S., Second harmonic generation and accurate index of refraction measurements in ux-grown KTiOPO4, Appl. Optics, 26, 2391‒2394, 1987.
  8. Harrison W. T. A., Gier T. E., Stucky G. D., The synthesis and Ab initio structure determination of Zn4O(BO3)2, a microporous, zinc borate constructed of “sused” subunits, of three- and ve-membered rings, Ange. Chem. Inter. Ed., 32, 724‒761, 1993.
  9. Yukihara E. G., Milliken E. D., Dull B. A., Thermally stimulated and recombination processes in MgB4O7 investigated by systematic lanthanide doping, J. Luminescence, 154, 251-259, 2014.
  10. Shyichuk A., Lis S., Meinrath G., Structure modeling of terbium doped strantium-lanthanım borate, J. Rare Earths, 32,3, 248, 2014.
  11. Guo C., Ding X., Seo H., Ren., Z, Bai J., Luminescent properties of UV excitable blue emitting phosphors MSr4(BO3)3:Ce3+ (M= Li and Na), J. Alloys Compd., 509, 4871, 2011.
  12. Zhang, X. Zhang, J. Dong, Z. Shi, J. Gong M., Concentration quenching of Eu2+ in a thermal-stable yellow phosphor Ca2BO3Cl: Eu2+ for LED application, J. Luminescence 132, 914, 2012.
  13. Ju G., Hu Y., Wu, H., Fu C., Mu Z., Kang F., A red-emitting heavy doped phosphor Li6Y(BO3)3:Eu3+ for white light-emitting diodes, Opt. Mater., 33, 1297, 2011.
  14. Diaz, A., Keszler, D. A., Eu24 Luminescence in the borates X2Z(BO3)2 (X= Ba, Sr; Z= Mg, Ca) Chem. Mater., 9 (10), 2071-2077, 1997.
  15. Zhang X., Seo H. J., Luminescence properties of novel NaBa4(BO3)3:Ce3+, Eu3+Phosphors, Physica B, 406, 77-79, 2011.
  16. Yashashchandra D., Shyam Bahadur R., J. Am. Ceram. Soc. 93, 56, 2010.
  17. Wu. L, Chen X. L., Xu Y. P., Sun Y. P., Stru