Journals / Bor Dergisi / 2019 / Cilt: 4 - Sayı: 4

Effects of polyelectrolytes on the hardness of borax decahydrate crystals

Pages
172–179
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thecharacterization results confirmed that the polyelectrolytes were adsorbed on thecrystal’s surface.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The hardness of borax decahydrate crystals was measured using cationicpolyelectrolytes of FO4115, FO4400 and FO4990 with anionic polyelectrolytesof AN923, AN930 and AN999 as an additive.
📊
Key Findings & Data:The measurements were carriedout in the indentation load range of 10 g to 30 g.
💡
Conclusion & Impact:Thecharacterization results confirmed that the polyelectrolytes were adsorbed on thecrystal’s surface.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The hardness of borax decahydrate crystals was measured using cationicpolyelectrolytes of FO4115, FO4400 and FO4990 with anionic polyelectrolytesof AN923, AN930 and AN999 as an additive. The measurements were carriedout in the indentation load range of 10 g to 30 g. It was determined that theVickers hardness (HV) decreased with increasing applied load, showing thatthe borax decahydrate crystals exhibited an indentation size effect. Vickersmicrohardness measurements revealed that pure borax decahydrate crystals hada brittle structure, yet the crystals obtained in additive media were categorizedas a soft material. The proportional specimen resistance model was applied todetermine the load-independent microhardness. The crystal hardness of boraxdecahydrate was found to change depending on the type and concentration ofpolyelectrolyte used. In addition to the mechanical properties, the thermal andphysical characteristics of borax decahydrate crystals were investigated bythermogravimetric and Fourier transform infrared spectroscopy analysis. Thecharacterization results confirmed that the polyelectrolytes were adsorbed on thecrystal’s surface.

🔖

Cite This Article

Polat, S., Sayan, P. (2022). Effects of polyelectrolytes on the hardness of borax decahydrate crystals. Bor Dergisi, Cilt: 4 - Sayı: 4, 172–179. https://ajindex.com/articles/467420

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. McMillian P. W., Glass-Ceramics, 2nd edition, Academic Press, New York, 1979
  2. Ceyhan A. A., Sahin Ö., Bulutcu, A. N., Crystallization kinetics of the borax decahydrate, J. Cryst. Growth, 300 (2), 440–447, 2007
  3. Gurbuz H., Ozdemir B., Experimental determination of the metastable zone width of borax decahydrate by ultrasonic velocity measurement, J. Cryst. Growth, 252 (1-3), 343–349, 2003
  4. Mannepalli S., Mangalampalli K. S. R. N., Indentation plasticity and fracture studies of organic crystals, Crystals, 7, 324, 2017
  5. Dieter G. E., Mechanical Metallurgy, Mc Graw Hill, New York, 1961
  6. Suresh S., Techniques and tools used for investigating the grown crystals: Review, Latin-American Phys. Educ., 6 (4), 547-558, 2012
  7. Tian Y., Xu B., Zhao Z., Microscopic theory of hardness and design of novel superhard crystals, Int. J. Refract. Met. Hard Mater., 33, 93-106, 2012
  8. Verma A. K., Ojha C., Shrivastava A. K., Effects of impurities on the hardness of alkali halide single crystals, AIP Conf. Proc., 1591, 1242, 2014
  9. Tavakoli M. H., Abasi T. A., Ali E. H., Growth of KCl crystal by Czochralski method and influence of nanodiamond impurity on its hardness and optical properties, Cryst. Res. Technol., 48 (3), 130-137, 2013
  10. Kishi T., Suzuki R., Shigemoto C., Murata H., Kojima K., Tachibana M., Microindentation hardness of proteins crystals under controlled relative humidity, Crystals, 7 (11), 339, 2017
  11. Amala B. M., Bindhu M. R., Studies on the effect of sodium chloride on ammonium dihydrogen phosphate single crystals, IJERT, 4 (9), 315-318, 2017
  12. Ding S., Zhang Q., Liu W., Luo J., Sun G., Sun D., Crystal growth, defects, mechanical, thermal and optical properties of Tb3 Sc2 Al3 O12 magneto-optical crystal, J. Cryst. Growth, 483,110-114, 2018
  13. Meyer E., Contribution to the knowledge of hardness and hardness testing, Z. ver, Dtsch. Ing. 52, 645–654, 1908
  14. Onitsch E. M., Micro-hardness testing, Mikroscopia. 2, 131–151, 1947
  15. Hanneman M., Metall. Manchu. 23, 135, 1941
  16. Goel N., Sinha N., Kumar B., Growth and properties of sodium tetraborate decahydrate single crystals, Mater. Res. Bull. 48 (4), 1632–1636, 2013
  17. Guo J., Chen, X., Zhang Y., Improving the mechanical and electrical properties of ceramizable silicone rubber/halloysite composites and their ceramic residues by incorporation of different borates, Polymers, 10 (4), 388, 2018.