Journals / Tekstil ve Konfeksiyon / 2006 / Cilt: 16 - Sayı: 4

THE INVESTIGATION OF THE INFLUENCE OF THE COAGULATION BATH TEMPERATURE ON THE CROSS-SECTIONAL SHAPES OF ACRYLIC FIBERS BY MICROSCOPY

KOAGÜLASYON BANYO SICAKLIĞININ AKRİLİK LİFLERİNİN MİKROSKOBİK GÖRÜNÜMÜNE ETKİSİNİN İNCELENMESİ

Pages
251–257
Publication Date
2006-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

If the coagulation bath temperature will be increase, then acrylic fibers will have more circular cross sectional shape

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the changes of the cross-sectional shapes of acrylic fibers were investigated by using different coagulation bath temperature in the acrylic fiber production.
📊
Key Findings & Data:The results of investigation have been shown that acrylic fibers have kidney-bean shape in the low coagulation bath temperature.
💡
Conclusion & Impact:If the coagulation bath temperature will be increase, then acrylic fibers will have more circular cross sectional shape
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Koagülasyon banyosu · Yaş çekim · Coagulation bath

Abstract

In this study, the changes of the cross-sectional shapes of acrylic fibers were investigated by using different coagulation bath temperature in the acrylic fiber production. The results of investigation have been shown that acrylic fibers have kidney-bean shape in the low coagulation bath temperature. If the coagulation bath temperature will be increase, then acrylic fibers will have more circular cross sectional shape

Özet

Bu çalışmada akrilik lif üretiminde farklı koagülasyon banyosu sıcaklarını kullanarak akrilik liflerinin enine kesit şekilleri incelendi. Araştırma sonuçları düşük koagülasyon banyosu sıcaklığında akrilik liflerinin enine kesit şeklinin böbrek-fasulye biçiminde olduğunu gösterdi. Şayet koagülasyon banyosu sıcaklığı arttırılacak olursa akrilik lifleri daha dairesel enine kesite sahip olacaktır

🔖

Cite This Article

TİYEK, İ., BOZDOĞAN, F. (2006). THE INVESTIGATION OF THE INFLUENCE OF THE COAGULATION BATH TEMPERATURE ON THE CROSS-SECTIONAL SHAPES OF ACRYLIC FIBERS BY MICROSCOPY. Tekstil ve Konfeksiyon, Cilt: 16 - Sayı: 4, 251–257. https://ajindex.com/articles/46536

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Annon., 2005, Fiber Production Sets Record in 2004, Textile World Asia, May/June
  2. Bach, H.C., and Knorr, R.S., 1990, Acrylic Fibers, Polimers: Fibers and Textiles, A Compendium, 3. Bozdoğan, F., 1995, Türkiye’de Üretilen Bazı Akrilik Liflerin Uzama ve Burulma Özellikleri İle Bazı İç Yapı Özelliklerinin Araştırılması, Tekstil ve Mühendis, 47-48, Mart-Haziran, 9-20
  3. Bozdoğan, F. ve Tiyek, İ., 2003, Akrilik Lifi İç Yapı Uzayında Yolculuk, Tekstil Trend, Şubat, 5. Bozdoğan, F., Karacan, İ. and Tiyek, İ., 2004, Characterisation of Structure and Properties of A Selection of Polyacrylonitrile (PAN)– Based Acrylic Fibers Produced In Turkey, E.Ü. Tekstil ve Konfeksiyon Araştırma – Uygulama Merkezi Yayınları, İzmir, 81p
  4. Capone, G.J., 1995, Wet Spinning Technology, 69–103, Acrylic Fiber Technology and Applications, Mason, J.C. (Ed.), Marcel Dekker Inc., New York, 388p
  5. Falkai, B.V., 1995, Dry - Spinning Technology, 105–165, Acrylic Fiber Technology and Applications, Mason, J.C. (Ed.), Marcel Dekker Inc., New York, 388p
  6. Frushor, B.G. and Knorr, R.S., 1985, Acrylic Fibres, 171–370, Handbook of Fiber Science and Technology: Volume IV: Fiber Chemistry, Lewin, M. and Pearce, E.M. (Eds.), Marcel Dekker Inc., New York, 1090p
  7. Seventekin, N., 2001, Kimyasal lifler, E.Ü. Tekstil ve Konf. Arş. Uyg. Merkezi Yayınları, İzmir, 10. Wade, B. And Knorr, R., 1995, Polymerization, 37–68, Acrylic Fiber Technology and Applications, Mason, J.C. (Ed.), Marcel Dekker Inc., New York, 388p.