Journals / Bilimsel Madencilik Dergisi / 2022 / Cilt: 61 - Sayı: 1

Predicting screening/classification products via the pseudorandom number selection routine

Eleme ve sınıflandırma ürünlerinin sözde rastgele sayı üretme rutiniyle tahmini

Pages
25–30
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that the algorithm is predictive if each particle has a selection probability proportional to the mass of its monosize fraction and some power of its diameter.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Screening/classification is performed for the separation of particles by their sizes.
📊
Key Findings & Data:The applicability of the algorithm was validated against the product size distributions from some industrial-scale screening/classification equipment - namely rake classifier, sieve bend (0.212 mm), vibrating screen (20 mm), and hydrocyclone - which are provided in the literature.
💡
Conclusion & Impact:The results show that the algorithm is predictive if each particle has a selection probability proportional to the mass of its monosize fraction and some power of its diameter.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Screening/classification is performed for the separation of particles by their sizes. There are empirical, phenomenological, and numerical models for predicting the size distributions of screening/classification products. This paper introduces a new algorithm for the same purpose, which partially mimics phenomenological and numerical models. The algorithm iteratively selects the monosize fractions with pre-defined probabilities, then carries particle masses from the selected fractions either to the oversize or undersize product. The applicability of the algorithm was validated against the product size distributions from some industrial-scale screening/classification equipment - namely rake classifier, sieve bend (0.212 mm), vibrating screen (20 mm), and hydrocyclone - which are provided in the literature. The results show that the algorithm is predictive if each particle has a selection probability proportional to the mass of its monosize fraction and some power of its diameter. Results also suggest that vibrating screens can provide the sharpest size separation

🔖

Cite This Article

Camalan, M. (2022). Predicting screening/classification products via the pseudorandom number selection routine. Bilimsel Madencilik Dergisi, Cilt: 61 - Sayı: 1, 25–30. https://ajindex.com/articles/465296

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Austin, L. G., Klimpel, R. R., Luckie, P. T. 1984. Process Engineering of Size Reduction: Ball Milling. New York: AIME. Camalan, M. 2021. A Computational Algorithm to Understand the Evolution of Size Distribution with Successive Breakage Events at Grinding. Environmental Sciences Proceedings, 6 (1), 7. https://doi.org/10.3390/ iecms 2021-09381.
  2. Coelho, M. A. Z., Medronho, R. A. 1992. An Evaluation of the Plitt and Lynch & Rao Models for the Hydrocyclones. In L. Svarovsky and T. M. Thew (Eds.), Hydrocyclones Analysis and Applications, Southampton: Kluwer Academic Publishers, 63-72.
  3. Davoodi, A., Asbjörnsson, G., Hulthén, E., Evertsson, M. 2019. Application of the Discrete Element Method to Study the Effects of Stream Characteristics on Screening Performance. Minerals, 9 (12), 788. https://doi. org/10.3390/min9120788. Dong, K. J., Wang, B., Yu, A. B. 2013. Modeling of particle flow and sieving behavior on a vibrating screen: From discrete particle simulation to process performance prediction. Industrial and Engineering Chemistry Research, 52 (33), 11333–11343. https://doi.org/10.1021/ ie3034637 Dong, K. J., and Yu, A. B. 2012. Numerical simulation of the particle flow and sieving behaviour on sieve bend/low head screen combination. Minerals Engineering, 31, 2–9. https://doi.org/10.1016/j.mineng. 2011.10.020 Dündar, H. 2020. Investigating the benefits of replacing hydrocyclones with high-frequency fine screens in closed grinding circuit by simulation. Minerals Engineering, 148 (January), 106212. https://doi. org/10.1016/j.mineng.2020.106212 Elskamp, F., Kruggel-Emden, H. 2015. Review and benchmarking of process models for batch screening based on discrete element simulations. Advanced Powder Technology, 26 (3), 679–697. https://doi. org/10.1016/j.apt.2014.11.001 Frausto, J. J., Ballantyne, G. R., Runge, K., Powell, M. S., Wightman, E. M., Evans, C. L., Gonzalez, P., Gomez, S. 2021. The effect of screen versus cyclone classification on the mineral liberation properties of a polymetallic ore. Minerals Engineering, 169 (April), 106930. https://doi. org/10.1016/j.mineng.2021.106930 Gupta, A., Yan, D. 2016. Mineral Processing Design and Operations. Amsterdam: Elsevier. Heiskanen, K. G. H. 1996. Developments in wet classifiers. International Journal of Mineral Processing, 44–45 (SPEC. ISS.), 29–42. https://doi. org/10.1016/0301-7516(95)00015-1
  4. Kelly, E. G. 1991. The significance of by-pass in mineral separators. Minerals Engineering, 4 (1), 1–7. https://doi.org/10.1