Journals / Tekstil ve Konfeksiyon / 2007 / Cilt: 17 - Sayı: 2

THE EFFECT OF SPINNING METHOD ON YARN HAIRINESS ON WORSTED YARNS

KAMGARN İPLİKLERİNDE EĞİRME METODUNUN İPLİK TÜYLÜLÜĞÜNE ETKİSİ

Pages
97–103
Publication Date
2007-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Yarn hairiness values of each yarn sample were measured and the effects of spinning method and twist factor on yarn hairiness were analyzed

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Yarn hairiness causes some problems in the various post-spinning processes and textile products therefore it is generally not a desired yarn property.
📊
Key Findings & Data:For this purpose, 100% wool worsted yarns were spun in two different nominal yarn counts with three different yarn twist factors using four different spinning methods.
💡
Conclusion & Impact:Yarn hairiness values of each yarn sample were measured and the effects of spinning method and twist factor on yarn hairiness were analyzed
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Uzun ştapel iplikçiliği · iplik tüylülüğü · Sirospun eğirme

Abstract

Yarn hairiness causes some problems in the various post-spinning processes and textile products therefore it is generally not a desired yarn property. Yarn hairiness is effected by fibre characteristics, machine and process parameters. In this study, the effect of spinning method on yarn hairiness was analyzed. For this purpose, 100% wool worsted yarns were spun in two different nominal yarn counts with three different yarn twist factors using four different spinning methods. Yarn hairiness values of each yarn sample were measured and the effects of spinning method and twist factor on yarn hairiness were analyzed

Özet

İplik tüylülüğü eğirme sonrası proseslerde ve tekstil mamullerinde sorunlara neden olduğu için genellikle istenilmeyen bir iplik özelliğidir. İplik tüylülüğü lif özellikleri, makine ve işlem parametrelerinden etkilenmektedir. Bu çalışmada eğirme metodunun iplik tüylülüğüne etkisi incelenmiştir. Bu amaçla dört farklı eğirme tekniği ile iki farklı iplik numarası ve üç farklı büküm faktöründe % 100 yün kamgarn iplikleri üretilmiştir. İplik tüylülüğü değerleri ölçülerek büküm faktörü ve eğirme metodunun etkisi incelenmiştir

🔖

Cite This Article

ÇELİK, P., KADOĞLU, H. (2007). THE EFFECT OF SPINNING METHOD ON YARN HAIRINESS ON WORSTED YARNS. Tekstil ve Konfeksiyon, Cilt: 17 - Sayı: 2, 97–103. https://ajindex.com/articles/46496

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Barella, A., Yarn Hairiness, The Textile Institute, 1983, 61 p
  2. Barella, A., The Hairiness of Yarns, The Textile Institute, 1993, 49 p
  3. Brunk, N., ‘EliTwist - A Compact Yarn for Superior Demands’, Spinnovation, 2003,No. 19, 17-22
  4. Canoğlu, S., Yükseloğlu, S.M., The Comparison of Yarn Parameters Hairiness of Ring and Compact (COM4) Yarns, 5th International Conference, TEXCHI 2003, June 16- 18, Liberec, Czech Rebublic
  5. Cheng, K.P.S. and YU, C., A Study of Compact Spun Yarns, Textile Research Journal, 2003,73(4):345-349
  6. Çelik, P., Kompakt İplik Eğirme Makinesinde Uzun Ştapelli Liflerin Eğrilmesi ve İplik Özelliklerinin Klasik Ring Eğirme Tekniği ile Karşı- laştırılması, 2002,Yüksek Lisans Tezi, Ege Üniversitesi Fen Bilimleri Enstitüsü
  7. Johnstone, B., Tulpule, V., Foster, M., Gilmour, K., The Economic Gains from Sirospun Technology, ABARE Research Report 92.5, 1992, ISSN 1037-8286, 63 p
  8. Kadoğlu, H., Quality Aspects Of Compact Spinning, Melliand International, 2001
  9. Kremenavo, D., Novackova, J., Voborova, J., Compact Yarn – Structure and Properties, 5th International Conference, TEXCHI 2003, June 16- 18, Liberec, Czech Rebublic
  10. Krifa, M., Hequet, E., Ethridge, D., Compact Spinning: New Potential For Short Staple Cottons, Textile Topics, 2002.11. Sun, M.N., Cheng, K.P.S., Structure and Properties of Cotton Sirospun Yarn, Textile Research Journal, 2000, 70(3), 261-268.