Journals / Tekstil ve Konfeksiyon / 2010 / Cilt: 20 - Sayı: 4

EFFECT OF YARNS PRODUCING DIFFERENT SPINNING SYSTEMS ON BENDING RESISTANCE OF KNITTED FABRICS

FARKLI EĞİRME SİSTEMLERİ İLE ÜRETİLMİŞ İPLİKLERİN ÖRME KUMAŞLARIN EĞİLME DAYANIMI (SERTLİK) DEĞERLERİNE ETKİSİ

Pages
313–319
Publication Date
2010-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the results of analysis of variance, spinning system and yarn number were found as significant at significance level (Sig. p<0.01) on the bending resistance values

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, %100 combed ring, compact, open end rotor and vortex (MVS) yarns with different yarn counts, which were used from the same raw material blend were produced and wound to same package density according to the principle of loose winding and the physical properties of the yarns were tested.
📊
Key Findings & Data:The bobbins were dyed with reactive dye for different three dyebath concentration in the universal package dyeing machine and were dried with a high frequency drier.
💡
Conclusion & Impact:In the results of analysis of variance, spinning system and yarn number were found as significant at significance level (Sig. p<0.01) on the bending resistance values
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:İplik eğirme sistemi · İplik özellikleri · Eğilme dayanımı

Abstract

In this study, %100 combed ring, compact, open end rotor and vortex (MVS) yarns with different yarn counts, which were used from the same raw material blend were produced and wound to same package density according to the principle of loose winding and the physical properties of the yarns were tested. The bobbins were dyed with reactive dye for different three dyebath concentration in the universal package dyeing machine and were dried with a high frequency drier. Single jersey knitted fabrics was produced using same machine parameters on the sample circular knitting machine and bending resistances were measured by the digital pneumatic stiffness tester. The test results were analyzed by using statistical methods. In the results of analysis of variance, spinning system and yarn number were found as significant at significance level (Sig. p<0.01) on the bending resistance values

Özet

Çalışmada aynı harmandan alınmış %100 pamuk kullanılarak, farklı iplik numaralarında ring, kompakt, open end rotor ve vorteks (MVS) iplikleri üretilmiştir. İplikler sabit yoğunlukta sarılarak, boya bobinler oluşturulmuş, ipliklerin fiziksel özellikleri test edilmiştir. Daha sonra üretilen ipliklerle sabit bobin yoğunluğunda yumuşak boya bobinleri oluşturulmuş, üniversal bobin boyama makinesinde, reaktif boyarmadde kullanılarak ve üç farklı konsantrasyonda boyama işlemleri yapılmış ve yüksek frekanslı kurutucuda kurutularak terbiye işlemleri tamamlanmıştır. Numune yuvarlak örme makinesinde, sabit parametrelerde süprem kumaşlar üretilmiş ve kumaşların eğilme dayanımı (yumuşaklık-sertlik) dereceleri dijital pnömatik yumuşaklık test cihazı kullanılarak belirlenmiştir. Test sonuçları istatistiksel metotlar kullanılarak analiz edilmiştir. Varyans analizi sonucunda, eğirme sistemlerinin ve iplik numarasının kumaş sertliğine olan etkilerinin istatistiksel olarak anlamlı olduğu (p

🔖

Cite This Article

ÖZDEMİR, H., OĞULATA, R. T. (2010). EFFECT OF YARNS PRODUCING DIFFERENT SPINNING SYSTEMS ON BENDING RESISTANCE OF KNITTED FABRICS. Tekstil ve Konfeksiyon, Cilt: 20 - Sayı: 4, 313–319. https://ajindex.com/articles/46374

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Özdil, N., 2003, “Kumaşlarda Fiziksel Kalite Kontrol Yöntemleri”, E.Ü. Tekstil ve Konfeksiyon Araştırma-Uygulama Merkezi Yayını, Yayın No:21, ISBN: 975-483-579-9, Bornova/İZMİR, 136s
  2. Mavruz, S., Oğulata, R.T., 2009, “Pamuklu Örme Kumaşlarda Hava Geçirgenliğinin İncelenmesi ve İstatistiksel Olarak Tahminlenmesi”, Tekstil ve Konfeksiyon, Yıl:1, s:29-38
  3. Örtlek H. G., Ülkü S., 2005, “The Comparison of The Properties of Murata Vortex-Ring-and Rotor Spun Cotton Yarns”, 5th International Istanbul Textile Conference Papers, İstanbul
  4. Örtlek H. G., Şener M., and Ülkü S., 2004, “Production Cost Analysis of MVS Yarns and Comparison with the Conventional Spinning Systems”, Tekstil Teknoloji (International Textile Technology Magazine), August, Vol:9(98), pp:82-93
  5. Ortlek H. G., Ulku S., 2004, “Vorteks İplik Üretim Sistemi (MVS) ve İplik Özellikleri”, Tekstil&Teknik, Nisan, s:222-228
  6. Özdil, N., Özdoğan, E., Demirel, A., Öktem T., A., 2004, “Kompakt ve Ring İpliklerinden Elde Edilen İnterlok Kumaşların Performans Özellikleri”, Tekstil ve Konfeksiyon, Yıl:4, s:203-209
  7. Özdil, N., Özdoğan, E., Demirel, A., Öktem T., A., 2005, “Comparative Study of the Characteristics of Compact Yarn-Based Knitted Fabrics”, Fibres & Textile in Eastern Europe, Vol:13(50), pp:39-43
  8. Becerir, B., Ömeroğlu, S., 2007, “Comparison of Color Values of Plain Cotton Fabrics Knitted from Ring and Compact Spun Yarns”, AATCC Review, Vol:7(7), pp:41-46
  9. Uster Technologies, 2005, “Uygulama Raporu, Uster Technologies Elyaf ve İplik Test Cihazları ile Ölçülen Tüm Kalite Parametrelerinin Açıklanması”
  10. TS 251, “Birim Uzunluk ve Birim Alan Kütlesinin Tayini”, Türk Standartları Enstitüsü, 1992
  11. ASTM D 4032-94, 2001. “Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure”, American Society for Testing and Materials, Pennsylvania
  12. Kalaycı, Ş., Albayrak, A., S., Kayış, A., ve Ark., 2003, “Varyans Analizi”, SPSS Uygulamalı Çok Değişkenli İstatistik Teknikleri, Şeref Kalaycı, Asil Yayın Dağıtım Ltd. Şti., Ankara, ISBN; 975-9091-14-3, 131-182.