SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2011 / Cilt: 21 - Sayı: 1

EFFECTS OF POLYPYRROLE ON THE CHARACTERISTICS OF POLYURETHANE BASED COMPOSITES

POLİPİROLÜN POLİÜRETAN ESASLI KOMPOZİTLERİN ÖZELLİKLERİNE ETKİSİ

Meltem YANILMAZ
Fatma KALAOĞLU
Hale KARAKAŞ
A. Sezai SARAÇ
Pages
3–9
Publication Date
2011-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

From this research, it can be concluded that Glass Transition Temperature (Tg) values of the composites were influenced by the number of hydrogen bonds formed inside polyurethane in the presence of PPy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the polyurethane based composites were prepared by solvent casting from dimethylformamid (DMF) solutions of Polyurethane-Polypyrrole (PU-PPy) in order to obtain the polyurethane based composites with enhanced dielectric properties for smart textile applications.
📊
Key Findings & Data:When the initial amount of pyrrole was increased, the Tg values of the composites were seen to increase.
💡
Conclusion & Impact:From this research, it can be concluded that Glass Transition Temperature (Tg) values of the composites were influenced by the number of hydrogen bonds formed inside polyurethane in the presence of PPy.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poliüretan · Pirol · Camsı geçiş

Abstract

In this study, the polyurethane based composites were prepared by solvent casting from dimethylformamid (DMF) solutions of Polyurethane-Polypyrrole (PU-PPy) in order to obtain the polyurethane based composites with enhanced dielectric properties for smart textile applications. From this research, it can be concluded that Glass Transition Temperature (Tg) values of the composites were influenced by the number of hydrogen bonds formed inside polyurethane in the presence of PPy. When the initial amount of pyrrole was increased, the Tg values of the composites were seen to increase. A correlation of the glass transition temperatures of the samples, determined by Differential Scanning Calorimeter (DSC) and Dynamic Mechanical Analyzer (DMA) via Young’s modulus, showed that the increase of PPy reduced mobility and increased the glass transition temperature and modulus. Dielectric study results indicated that ~20% wt. Pyrrole (Py) increases dielectric constant above 7000 and these composites can be good candidates for electrical application

Özet

Bu çalışmada, poliüretan-polipirol çözeltisinden dimetil formamid(DMF) çözücüsü kullanılarak tekstil uygulamaları için dielektrik özellikleri iyileştirilmiş poliüretan bazlı kompozitler elde edilmiştir. Bu çalışma ile polipirol varlığında kompozit malzemelerin camsı geçiş sıcaklığının (Tg), poliüretan içerisindeki hidrojen bağı miktarından etkilendiği sonucu çıkarılabilir. Pirolün başlangıç miktarı arttırıldığında, kompozit malzemelerin Tg değerlerinin arttığı görülmüştür. Diferansiyel Taramalı Kalorimetreden (DSC) elde edilen camsı geçiş sıcaklığı ve Dinamik Mekanik Analiz cihazından (DMA) elde edilen Young modülü sonuçlarının korelasyonu, polipirol arttıkça kompozitlerin hareket kabiliyetinin düştüğünü; camsı geçiş sıcaklığının ve modülünün arttığını göstermiştir. Dielektrik çalışmalarına göre, başlangıçta %20 Pirol içeren kompozit malzemenin dielektrik sabiti 7000’ in üzerindedir ve bu malzemeler elektriksel uygulamalar için iyi birer adaydır

🔖

Cite This Article

YANILMAZ, M., KALAOĞLU, F., KARAKAŞ, H., SARAÇ, A. S. (2011). EFFECTS OF POLYPYRROLE ON THE CHARACTERISTICS OF POLYURETHANE BASED COMPOSITES. Tekstil ve Konfeksiyon, Cilt: 21 - Sayı: 1, 3–9. https://ajindex.com/articles/46328

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Voda A, Beck K.T. S, Adler M., 2006, "Investigation of Soft Segments of Thermoplastic Polyurethane by NMR, Differential Scanning Calorimetry" Polymer Testing, 25, 203-213
  2. Ding X.M., Hu J.L., Tao X.M., 2006, "Preparation of Temperature-Sensitive Polyurethanes for Smart Textiles" Textile Research Journal, 76, 406
  3. Tsai H., Hong P., Yen M., 2007, "Preparation and Physical Properties of MDEA-Based Polyurethane Cationomers and Their Application to Textile Coatings" Textile Research Journal, 77(9), 710-720
  4. Vicentini D.S., Barra G.M.O., Bertolino J.R., 2007, "Polyaniline/Thermoplastic Polyurethane Blends: Preparation and Evaluation of Electrical Conductivity", European Polymer Journal, 43, 4565-4572
  5. Njuguna J., Pielichowski K., 2004, "Recent Developments in Polyurethane Based Conducting Composites", Journal of Materials Science, 39, 3991
  6. Guo Z., Lee S., Kim H., 2009, "Fabrication, Characterization and Microwave Properties of Polyurethane Nanocomposites Reinforced with Iron Oxide and Barium Titanate Nanopar", Acta Materialia, 57, 267-277
  7. Pukanszky Jr. B., Bagdi K., Tovölgyi Z., 2008, "Effect of Interactions, Molecular and Phase Structure on the Properties of Polyurethane Elastomers", Progress in Colloid and Polymer Science, 135, 218–224
  8. Sonnenschein M., Lysenko Z., Brune D., 2005, "Enhancing Polyurethane Properties via Soft Segment Crystallization", Polymer, 46, 10158-10166
  9. Ioan S., Lupu M., Macocinschi D., 2005, "Influence of Ester and Ether Groups on Solution Properties of Polyurethanes", High Performance Polymers, 17, 533-546
  10. Bi X., Pei Q., 1987, "An Electrically-Conductive Composite Prepared by Electrochemical Polymerization of Pyrrole into Polyurethane", Synthetic Metals, 2, 145-156
  11. Elidrissi A., 2008, "Effect of Sequence Concentrations on Segmented Polyurethanes Properties", Pigment & Resin Technology, 37(2), 73-79
  12. Wen T., Hung S., Digar M., 2001, "Effect of Polypyrrole on the Morphology and Ionic Conductivity of TPU Electrolyte Containing LİCIO4", Synthetic Metals,118, 11-18
  13. Liu X., Zhao Y., Liu Z., 2008, "Investigation on the Interactions Between Polyurethane and Metal Chloride", Journal of Molecular Structure, 892, 200-204
  14. Ciobanu C., Ungureanu M., Ignat L., 2004, "Properties of Lignin Polyurethane Films Prepared by Casting Method", Industrial Crops and Products, 20, 231-241
  15. Sahoo N.G., Jung, Y.C., So, H.H., 2007, " Polypyrrole Coated Carbon Nanotubes: Synthesis, Characterization, and Enhance