Journals / Tekstil ve Konfeksiyon / 2012 / Cilt: 22 - Sayı: 2

THE EFFECTS OF RAW MATERIAL, WEFT SETTING AND WEAVE ON THE BREAKING STRENGTH, ELONGATION AT BREAK AND TEAR STRENGTH OF UPHOLSTERY DOUBLE FABRICS

Pages
159–165
Publication Date
2012-06-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Findings and evaluations of the study have been given in detail in the paper.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Öz The aim of this study is to investigate the effects of structural properties of yarn and fabric such as; raw materials, weft setting and fabric construction on the breaking strength, elongation at break and tear strength of upholstery double fabrics.
📊
Key Findings & Data:The effect of the fibre type, weft setting and weave pattern on the physical properties of upholstery fabrics were investigated by variance analysis by means of SPSS 15.0.
💡
Conclusion & Impact:Findings and evaluations of the study have been given in detail in the paper.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Anahtar Kelimeler Upholstery double fabrics · Physical properties of fabrics · Breaking strength

Özet

Öz The aim of this study is to investigate the effects of structural properties of yarn and fabric such as; raw materials, weft setting and fabric construction on the breaking strength, elongation at break and tear strength of upholstery double fabrics. For this purpose, double woven fabric samples with three different weft densities and of three different weave patterns with two types of warp and weft yarns, whose raw materials were different, were manufactured. The physical properties of woven fabric samples were determined by relevant tests. The effect of the fibre type, weft setting and weave pattern on the physical properties of upholstery fabrics were investigated by variance analysis by means of SPSS 15.0. Findings and evaluations of the study have been given in detail in the paper.

🔖

Cite This Article

ÖZDEMİR, H., YAVUZKASAP, D. (2012). THE EFFECTS OF RAW MATERIAL, WEFT SETTING AND WEAVE ON THE BREAKING STRENGTH, ELONGATION AT BREAK AND TEAR STRENGTH OF UPHOLSTERY DOUBLE FABRICS. Tekstil ve Konfeksiyon, Cilt: 22 - Sayı: 2, 159–165. https://ajindex.com/articles/46292

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Başer, G., 2004, Dokuma Tekniği ve Sanatı, Cilt 1, Punto Publishing
  2. Okur, A., 2002, Tekstil Materyallerinde Mukavemet Testleri, DEÜ Engineering Faculty Press, No. 303
  3. Ünal, P. and Taşkın, C., “% 100 Poliester Kumaşlarda Dokunun ve Sıklıkların Kopma Mukavemetine Etkisi”, Tekstil ve Konfeksiyon, 2007/2, p.115-118
  4. Oğulata, R.T. and Kadem, F.D., “Boyalı İpliklerden Üretilen Farklı Konstrüksiyonlardaki % 100 Pamuklu Kumaşlarda Kumaş Kopma Mukavemetinin Regrasyon Analizi ile Tahminlenmesi”, Tekstil ve Konfeksiyon, 2008/3, p.185-190
  5. Oğulata, R.T. and Kadem, F.D., “Boyalı İpliklerden Üretilen Farklı Konstrüksiyonlardaki Pamuklu Kumaşlarda Kumaş Yırtılma Mukavemetinin Regrasyon Analizi”, Tekstil ve Konfeksiyon, 2009/2, p.97-101
  6. Şekerden, F. and Çelik, N., “Atkı Elastanlı Dokuma ve Kumaş Karakteristikleri”, Tekstil ve Konfeksiyon, 2010/2, p.120-129
  7. Yavuzkasap, D., 2010, “Döşemelik Kumaşların Mekanik Özellikleri Üzerine Bir Araştırma”, Dokuz Eylül University Graduate School of Natural and Applied Sciences, MSc Thesis, İzmir, Turkey
  8. TS 11818 EN 14465, 2005, Tekstil-Döşemelik Kumaşlar-Özellikler ve Deney Metotları, Turkish Standards Institution, Ankara
  9. TS EN ISO 13934-1, 2002, Kumaşların Gerilme Özellikleri- Bölüm 1: En Büyük Kuvvetin ve En Büyük Kuvvet Altında Boyca Uzamanın Tayini- Şerit Metodu, Turkish Standards Institution, Ankara
  10. TS EN ISO 13937-3, 2002, Tekstil- Kumaşların Yırtılma Özellikleri- Bölüm 3: Kanat Biçimindeki Deney Numunelerinin Yırtılma Kuvvetinin Tayini- Tek Yırtma Metodu, Turkish Standards Institution, Ankara.