Journals / Tekstil ve Konfeksiyon / 2014 / Cilt: 24 - Sayı: 1

EXPERIMENTAL TECHNIQUES FOR MEASURING SEWING NEEDLE TEMPERATURE

DİKİŞ İĞNESİ SICAKLIĞININ ÖLÇÜMÜ İÇİN DENEYSEL TEKNİKLER

Pages
111–118
Publication Date
2014-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

All of our experiments indicate that the needle temperature is always higher when thread is used, which is contradictory to the results of some researchers, who have found that needle temperature is lower when thread is used

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this article, three different methods (thermal camera, attached thermocouple and inserted thermocouple) are used to measure sewing needle temperatures on a lockstitch machine.
📊
Key Findings & Data:The experiments were conducted at machine speeds from 16 stitches/sec to 66 stitches/sec and for a maximum time of 60 seconds.
💡
Conclusion & Impact:All of our experiments indicate that the needle temperature is always higher when thread is used, which is contradictory to the results of some researchers, who have found that needle temperature is lower when thread is used
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Sewing needle · needle temperature · needle heat measurement

Abstract

In this article, three different methods (thermal camera, attached thermocouple and inserted thermocouple) are used to measure sewing needle temperatures on a lockstitch machine. The experiments were conducted at machine speeds from 16 stitches/sec to 66 stitches/sec and for a maximum time of 60 seconds. This research is useful for predicting the real temperature of needles at different sewing speeds and for comparing methods of measurement. The inserted thermocouple method showed the lowest standard deviation and highly reproducible results. The results for all the measurement techniques are compared at different sewing speeds and will be beneficial for researchers who have made theoretical models for sewing needle temperatures and need to verify them using experimental results. The information in this article will also be useful for thread lubricant producers who use thermal cameras for needle temperature measurement. All of our experiments indicate that the needle temperature is always higher when thread is used, which is contradictory to the results of some researchers, who have found that needle temperature is lower when thread is used

🔖

Cite This Article

MAZARI, A., HAVELKA, A., HES, L. (2014). EXPERIMENTAL TECHNIQUES FOR MEASURING SEWING NEEDLE TEMPERATURE. Tekstil ve Konfeksiyon, Cilt: 24 - Sayı: 1, 111–118. https://ajindex.com/articles/46250

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Qinwen Li, and Liasi, E., 2001, “A study on the needle heating in heavy industrial sewing part-1”, International Journal of Clothing Science and Technology. Vol: 13(5), pp: 351-367
  2. Hersh,S., and Grady, P., 1969, “Needle heating during high speed sewing”, Textile Research Journal. Vol: 39, pp: 101-120
  3. Midha VK, Mukhopadhyay A, Chatopadhyay R, Kothari VK., 2009, “Studies on the changes in tensile properties of sewing thread at different sewing stages.” Textile Research Journal, Vol: 79, pp: 1155–1167 4. Qinwen, Li, and Liasi, E., 2001, “A study on the needle heating in heavy industrial sewing, part II”, International Journal of Clothing Science and Technology. Vol: 13(2), pp: 87-105
  4. Trung, N. Z. Kùs, 1999, “Computer Simulation of Sewing Needle Heating”, CSCC'99 Proceedings: pp: 1991-1994
  5. Mazari, A., and Havelka, A., 2013, “Tensile properties of sewing thread and sewing needle temperature at different speed of sewing machine” Advanced Materials Research. Online-ISSN: 1662-8985, print-ISSN: 1022-6680, Vol: 627
  6. Li, Q., Liasi, E., Simon, D., and Du, R., 1999, “Heating of industrial sewing machine needles: FEA model and verification using IR radiometry”, in Thermosense XXI, Proc. SPIE, R.N. Wurzbach,D.D. Burleigh eds., 3700: 347-357
  7. TEXTILCHEMIE DR. PETRY GMBH “Infrared needle temperature measurement”, accessed 1 October 2013,
  8. Trung, N. C., and Kùs, Z., 1995, “Theoretical Analysis of Sewing Needle Temperature”, In: Young Textile Science ‘95, Liberec, Czech Republic
  9. Sondhelm, W. S., 1953, “Causes of seam damage: Needle heating”, Journal of Textile Institute.Vol 44, pp: 580-585
  10. Laughlin, R. D., 1963, “Needle temperature measurement by infrared pyrometry”, Textile Research Journal. Vol: 33(1), pp: 35-39
  11. Dorkin, C. M., and Chamberlain, N. H., 1963, “The facts about needle heating”, Clothing Institute Technical Report no.13
  12. Anon., 1981, “Finding solutions to needle problems”, Bobbin, February, pp: 180-187
  13. Anon., January 1996, “Sewing Solutions”, Apparel International. January pp: 9
  14. Lewis, J., 1973, “Clothing finishing procedure for preventing sewing damage in wool and wool/synthetic fiber double jersey fabrics”, Clothing Research Journal. Vol: 1(3) pp 3-19
  15. Poppinswimmer, K., 1980, “Sewing damage in knit goods-What can be done”, Melliand and Textilberichte (English edition), Vol-9, pp 1556-1559
  16. Schmetz needle guide,