Journals / Tekstil ve Konfeksiyon / 2014 / Cilt: 24 - Sayı: 3

PREDICTION OF THERMAL RESISTANCE OF THE KNITTED FABRICS IN WET STATE BY USING MULTIPLE REGRESSION ANALYSIS

ISLAK HALDEKİ ÖRME KUMAŞLARIN ISIL DİRENÇLERİNİN ÇOKLU REGRESYON ANALİZİ İLE TAHMİNLENMESİ

Pages
291–297
Publication Date
2014-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The findings show that specific heat of fiber, fiber density, fabric thickness and loop density are the most important factors for thermal resistance of the fabric and thermal resistance of the fabric in different moisture content can be predicted by using regression analysis successfully

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Thermal properties of fabric depend on fabric construction parameters such as fiber and yarn type, fabric thickness etc. and also moisture content present.
📊
Key Findings & Data:As the moisture content of the fabrics increase thermal properties of the fabrics vary.
💡
Conclusion & Impact:The findings show that specific heat of fiber, fiber density, fabric thickness and loop density are the most important factors for thermal resistance of the fabric and thermal resistance of the fabric in different moisture content can be predicted by using regression analysis successfully
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Örme kumaş · Isıl direnç · Nem oranı

Abstract

Thermal properties of fabric depend on fabric construction parameters such as fiber and yarn type, fabric thickness etc. and also moisture content present. As the moisture content of the fabrics increase thermal properties of the fabrics vary. Thermal resistance is one of the main parameters of thermal comfort of fabrics. Thermal resistance of fabric decreases as the fabric moisture content increases. In this study the thermal resistance of knitted fabrics produced from cotton, polyester, modal and acrylic fibers in different moisture content is predicted from construction parameters by using two different regression analyses. The findings show that specific heat of fiber, fiber density, fabric thickness and loop density are the most important factors for thermal resistance of the fabric and thermal resistance of the fabric in different moisture content can be predicted by using regression analysis successfully

Özet

Kumaşların ısıl özellikleri lif ve iplik tipi, kumaş kalınlığı gibi kumaş konstrüksiyon parametrelerinin yanında kumaşta bulunan nem oranına da bağlıdır. Kumaşın nem oranı arttığında ısıl özellikleri değişmektedir. Isıl direnç kumaş ısıl konforunun temel parametrelerinden birisidir. Kumaş ısıl direnci, kumaşın nem oranı arttığında azalmaktadır. Bu çalışmada pamuk, poliester, modal ve akrilik liflerinden üretilmiş örme kumaşların farklı nem oranlarındaki ısıl direnci iki farklı regresyon analizi ile tahminlenmiştir. Sonuçlar lifin özgül ısısı, lif yoğunluğu, kumaş kalınlığı ve ilmek yoğunluğunun kumaş ısıl direnci için en önemli özellikler olduğunu ve kumaşların farklı nem oranlarında ısıl dirençlerinin regresyon analizi ile tahminlenebileceğini göstermektedir

🔖

Cite This Article

KANAT, Z. E., ÖZDİL, N., MARMARALI, A. (2014). PREDICTION OF THERMAL RESISTANCE OF THE KNITTED FABRICS IN WET STATE BY USING MULTIPLE REGRESSION ANALYSIS. Tekstil ve Konfeksiyon, Cilt: 24 - Sayı: 3, 291–297. https://ajindex.com/articles/46225

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Li, Y., 2001, "The Science of Clothing Comfort", Textile Progress, The Textile Institute International, UK. 138p
  2. Özdil, N., Marmaralı, A. and Dönmez Kretzschmar, S., 2007, "Effect of Yarn Properties on Thermal Comfort of Knitted Fabrics", International Journal of Thermal Sciences, Vol: 46, pp: 1318–1322
  3. Hes, L. and Loghin, C., 2009, "Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State", Journal of Fiber Bioengineering and Informatics, Vol: 2 (3), pp: 141 - 149
  4. Stanković, S. B., Popović, D. and Poparić, G. B., 2008, "Thermal Properties of Textile Fabrics Made of Natural and Regenerated Cellulose Fibers", Polymer Testing, Vol: 27, pp: 41–48
  5. Çil, M.G., Nergis, U.B. and Candan, C., 2009, "An Experimental Study of Some Comfort-Related Properties of Cotton--Acrylic Knitted Fabrics", Textile Research Journal, Vol: 79(10), pp: 917–923. 6. Čiukas, R., Abramavičiūtė, J. and Kerpauskas, P., 2011, "Investigation of the Thermal Properties of Socks Knitted From Yarns with Peculiar Properties. Part II: Thermal Resistance of Socks Knitted from Natural and Stretch Yarns", Fibres & Textiles in Eastern Europe, Vol: 19(3(86)), pp: 64-68
  6. Behera, B. K., Ishtiaque, S. M. and Chand, S., 1997, "Comfort Properties of Fabrics Woven from Ring-, Rotor-, and Friction-Spun Yarns", Journal of The Textile Institute, Vol: 88(3), pp: 255-264
  7. Kane, C. D., Patil U. J. and Sudhakar, P., 2007, "Studies on the Influence of Knit structure and Stitch Length on Ring and Compact Yarn Single Jersey Fabric Properties", Textile Research Journal, Vol: 77(8), pp: 572–582
  8. Majumdar, A., Mukhopadhyay, S. and Yadav, R., 2010, "Thermal Properties of Knitted Fabrics Made from Cotton and Regenerated Bamboo Cellulosic Fibres", International Journal of Thermal Sciences, Vol: 49, pp: 2042-2048
  9. Vigneswaran, C., Chandrasekaran K. and Senthilkumar, P., 2009, "Effect of Thermal Conductivity Behavior of Jute/Cotton Blended Knitted Fabrics", Journal of Industrial Textiles, Vol: 38(4), pp: 289-306
  10. Wang, F., Zhou, X. and Wang, S., 2009, "Development Processes and Property Measurements of Moisture Absorption and Quick Dry Fabrics", Fibres & Textiles in Eastern Europe, Vol: 17(2 (73)), pp: 46-49
  11. Zhang, W., Li, J., Chen, W. and Long, S., 1999, "Wetness Comfort of Fine Polypropylene-Fibre Fabrics", Journal of The Textile Institute, Vol: 90(2), pp: 252-263
  12. Bedek, G., Salaün, F., Martinkovska, Z., Devaux, E. and Dupont, D., 2011, "Evaluation of T