SavedAdd your journal

Journals / Bartın Orman Fakültesi Dergisi / 2019 / Cilt: 21 - Sayı: 3

Screw Driving Torques in Wood Polymer Composite Compatibilized with Maleic Anhydride-grafted Polypropylene

Maleik Anhidrit ile Graftlanmış Polipropilen ile Muamele Edilmiş Odun Polimer Kompozitlerde Vidalama Torklarının Belirlenmesi

Mehmet KARAMANOĞLU
Alperen KAYMAKCI
Önder TOR
Pages
777–784
Publication Date
2022-10-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results indicated a good margin between seating and stripping torques when driving screws in the face of WPC compatibilized with MAPP.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study aimed to investigate the characteristics of screw driving torques in wood-polymer composite (WPC) compatibilized with maleic anhydride-grafted polypropylene (MAPP).
📊
Key Findings & Data:To meet this objective, pine wood flour, polypropylene with coupling agent (maleic anhydride grafted polypropylene) were compounded in a twin screw extruder.
💡
Conclusion & Impact:Results indicated a good margin between seating and stripping torques when driving screws in the face of WPC compatibilized with MAPP.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study aimed to investigate the characteristics of screw driving torques in wood-polymer composite (WPC) compatibilized with maleic anhydride-grafted polypropylene (MAPP). To meet this objective, pine wood flour, polypropylene with coupling agent (maleic anhydride grafted polypropylene) were compounded in a twin screw extruder. The process of screw driving had two main torques, one of which was the seating torque defined as the torque required to clamp parts and other one was the stripping torque defined as the maximum torque right before screw strips in the material and the torque drops suddenly because of the formed screw threads being stripped in wood-based composites. However, there is no such a study about the screw driving torques in WPC compatibilized with MAPP. Therefore, the characteristics of screw driving torques was investigated in this material. Results indicated a good margin between seating and stripping torques when driving screws in the face of WPC compatibilized with MAPP.

Özet

Bu çalışmada, maleik anhidrit ile graftlanmış polipropilen ile muamele edilmiş (MAPP) odun polimer kompozitlerde vidalama torkunu etkileyen faktörlerin araştırılması amaçlanmıştır. Bu amaç doğrultusunda çam odun unu, polipropilen ve uyum sağlayıcı madde çift vidalı bir ekstruder içerisinde karıştırılmıştır. Vidalama işleminde iki ayrı vidalama tork değeri mevcuttur. Bunlardan bir tanesi vidanın malzemenin içerisine tam oturduğu ve sıkıştırma işleminin başladığı anda ki tork değeridir. Diğeri ise, vidanın malzeme içerisinde boşta dönmesinden hemen önceki tork değeridir ve maksimum tork olarakta adlandırılır. Vidalama torku genellikle yonga levhalarda ve liflevhalarda çalışılmıştır. Maleik anhidrit ile graftlanmış polipropilenin (MAPP) odun polimer kompozitler de ki vidalama performansı araştırılmamıştır. Bu malzeme üzerinde vidalama torkları kılavuz deliği ve vida türü faktörlerinin etkileri incelenmiştir. MAPP ile muamele edilmiş odun polimer kompozitlerin yüzeylerinde yapılan bu çalışmanın en önemli sonucu, kılavuz deliği ve vida türünün oturma torku ve maksimum tork üzerine istatiksel olarak önemli etkisinin olduğu bulunmuştur.

🔖

Cite This Article

KARAMANOĞLU, M., KAYMAKCI, A., TOR, Ö. (2022). Screw Driving Torques in Wood Polymer Composite Compatibilized with Maleic Anhydride-grafted Polypropylene. Bartın Orman Fakültesi Dergisi, Cilt: 21 - Sayı: 3, 777–784. https://ajindex.com/articles/461932

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. ASTM D 1037-12 (2012). Standard test methods for evaluating properties of wood-base fiber and particle panel materials. American Society for Testing and materials, West Conshohocken, PA
  2. ASTM D 618-13 (2013). Standard practice for conditioning plastics for testing Annual book of ASTM Standards, American Society for Testing and materials, West Conshohocken, PA
  3. Bahr, W (1994). Analysis of seating and fracturing torque of bicortical screws. J Oral and Maxillofacial Surgery, 52(5), 487-488
  4. Bazant, P., Munster, L., Machovsky, M., Sedlak, J., Pastorek, M., Kozakova, Z., Kurita, I. (2014). Wood flour modified by hierarchical Ag/ZnO as potential filler for wood–plastic composites with enhanced surface antibacterial performance. Industrial Crops and Products, 62, 179-187
  5. Boulanger, K. A. (2009). Statistical and experimental analysis of a torque model for self-tapping screws. A major qualifying project report submitted to the faculty of the Worcester Polytechnic Institute in partial fulfillment of the requirements for the degree of bachelor of science
  6. Bütün, F. Y., Mayer, A. K., Ostendorf, K., Gröne, O. E. Z., Krause, K. C., Schöpper, C., Mertens, O., Krause, A., Mai, C. (2018). Recovering fibres from fibreboards for wood polymer composites production. International Wood Products Journal, 9(2), 42-49
  7. Carroll, M. N. (1970). Relationship between driving torque and screw-holding strength in particleboard and plywood. Forest Prod Journal, 20(3), 24-29
  8. Eckelman, C. A. (1990). Fasteners and their use in particleboard and medium density fiberboard. National Particleboard Association, Purdue University 9. Hill, C., Norton, A., Kutnar, A. (2015). Environmental impacts of wood composites and legislative obligations. Wood Composites. 309-332
  9. Hu, L., Tackett, B., Tor, O., Zhang, J. (2016). Analysis of sitting forces on stationary chairs for daily activities. Ergonomics, 59(4), 1-38
  10. ISO 6789-2 (2017). Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty. ICS 25.140.30 Hand-operated tools. Geneva, Switzerland 12. Kuang, F., Xing, Y., Wu, Z., Zhang, J. (2017). Characteristics of screwdriving torques in wood-plastic composites. Wood and Fiber Science, 49(2), 206-218
  11. La Mantia, F. P., Scaffaro, R., Morreale, M., Lo Re G. (2008). Effect of the processing on the properties of biopolymer based composites filled with wood flour. International Journal of Mate