SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2015 / Cilt: 25 - Sayı: 3

STUDY OF THE FABRIC PERMEABILITY EFFECT ON PARACHUTE DROPPING BASED ON ALE METHOD

ALE METODUNA GÖRE, PARAŞÜT DÜŞÜŞÜNE KUMAŞ GEÇİRGENLİĞİNİN ETKİSİ ÜZERİNE BİR ARAŞTIRMA

Jiajia LIU
Zhongbo ZHANG
Shilin FENG
Chen CHEN
Han CHENG
Pages
207–214
Publication Date
2015-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results analysis, it was found that the parachute opening is related with the size of bulb shape, and the bulb shape formed in inflating process is closely related with the fabric permeability, which could be used to guide the parachute design

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The fabric permeability has great effect on parachute opening and deceleration characteristics, therefore that property would be fully considered in parachute design.
📊
Key Findings & Data:In this paper, the C9 parachute was taken as the research object, and then the finite element method based on Arbitrary Lagrange Euler (ALE) algorithm was used to simulate the actual airdropping process, and the Ergun equation to simulate the dynamic permeability.
💡
Conclusion & Impact:According to the results analysis, it was found that the parachute opening is related with the size of bulb shape, and the bulb shape formed in inflating process is closely related with the fabric permeability, which could be used to guide the parachute design
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Porous textiles · macro permeability · materials mechanics

Abstract

The fabric permeability has great effect on parachute opening and deceleration characteristics, therefore that property would be fully considered in parachute design. However whether the fabric permeability is reasonable needs a series of airdrop experiments to confirm. In this paper, the C9 parachute was taken as the research object, and then the finite element method based on Arbitrary Lagrange Euler (ALE) algorithm was used to simulate the actual airdropping process, and the Ergun equation to simulate the dynamic permeability. Through the explicit calculation, the deceleration characteristics such as dropping velocity, acceleration, and rich flow field information were obtained. Four models with different fabric permeability were calculated by the above method in this paper. According to the results analysis, it was found that the parachute opening is related with the size of bulb shape, and the bulb shape formed in inflating process is closely related with the fabric permeability, which could be used to guide the parachute design

🔖

Cite This Article

LIU, J., ZHANG, Z., FENG, S., CHEN, C., CHENG, H. (2015). STUDY OF THE FABRIC PERMEABILITY EFFECT ON PARACHUTE DROPPING BASED ON ALE METHOD. Tekstil ve Konfeksiyon, Cilt: 25 - Sayı: 3, 207–214. https://ajindex.com/articles/46170

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Purvis J. W., 1981, “Theoretical analysis of parachute inflation including fluid kinetics”, AIAA Report, 1981-1925
  2. Stein K. R., Benney R. J., Steeves E. C., 1993, “A computational model that couples aerodynamic structural dynamic behavior of parachutes during the opening process”, NASA Report, NASA-ADA264115
  3. Kim Y. S., and Peskin C. S., 2009, “3-D Parachute simulation by the immersed boundary method”, Computers and Fluids, Vol: 38, pp: 1080-1090
  4. MEZARCIÖZ S., MEZARCIÖZ S., OĞULATA R. T., 2014, “Prediction of air permeability of knitted fabrics by means of computational fluid dynamics”, Tekstil ve Konfeksiyon, Vol: 24(2), pp: 212-218
  5. XIAO X. L., ZENG X. S., LONG A., et al., 2012, “An analytical model for through-thickness permeability of woven fabric”, Textile Research Journal, Vol: 82(5), pp: 492-501
  6. YAZDCHI K., SRIVASTAVA S., LUDING S., 2011, “Microstructural effects on the permeability of periodic fibrous porous media”, International Journal of Multiphase Flow, Vol: 36, pp: 956-966
  7. MELRO A. R., CAMANHO P. P., PINHO S. T., 2008, “Generation of random distribution of fibres in long-fibre reinforced composites”, Composites Science and Technology, Vol: 68, pp: 2092-2102
  8. AQUELET N., WANG J., TUTT B. A., et al., 2006, “Euler-Lagrange Coupling with Deformable Porous Shells.”, ASME Pressure Vessels and Piping Division Conference, pp: 23–27
  9. JIA H., RONG W., CHEN G. L., 2009, “The use of LS-DYNA to simulate the permeability parameters of the parachute canopy”, Spacecraft Recovery & Remote Sensing, Vol: 30(1), pp: 15-20
  10. BREEN D. E., HOUSE D. E., GETTO P. H., 1992, “A Physically-based I article Model of Woven Cloth”, Visual Computer, Vol: (4), pp: 264-277
  11. TERZOPOULOS D., PLATT J., BARR A., et al., 1987, “Elastically Deformable Models”, Computer Graphics, Vol: 21(4), pp: 205-214. 12. 12 RUDOMUN I. J., 1990, “Simulating Cloth Using a Mixed Geometric-Physical Method”, Ph. D Thesis: University of Pennsylvania
  12. KUNII T. L., GOTODA H., 1990, “Singularity Theoretical Modeling and Animation of Garment Wrinkle Formation Process”, Visual Computer, Vol: 6(6), pp: 326-336
  13. CHENG H., YU L., YIN Z. W., 2012, “A New Method of Complicated Folded Fabric Modeling”, Journal of Harbin Institute of Technology, Vol: 19(2), pp: 43- 46
  14. CHENG H., YU L., CHEN X., et al., 2014, “Numerical Study of Flow around Parachute based on Macro-scale Fabric Permeability as Momentum Source Term”, Industria Textila, Vol: 65(5), pp: 271-276