Journals / Tekstil ve Konfeksiyon / 2017 / Cilt: 27 - Sayı: 1

THE EFFECT OF REPEATED LAUNDERING ON PROPERTIES OF NEEDLED AND CALENDERED NONWOVEN CLEANING MATERIALS PRODUCED WITH DIFFERENT PROCESS CONDITIONS

TEKRARLI YIKAMANIN FARKLI ÜRETİM PARAMETRELERİYLE ÜRETİLMİŞ İĞNELENMİŞ VE KALENDERLENMİŞ DOKUSUZ YÜZEY TEMİZLİK BEZLERİNİN ÖZELLİKLERİNE ETKİSİ

Pages
60–67
Publication Date
2017-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results derived from the study indicated that through air bonded samples had better performance properties after washing cycles compared with calendered counterparts.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to evaluate the physical and performance properties of needled and thermal bonded nonwoven cleaning materials produced with different conditions after changing washing cycles; 0, 1, 5 and 10 cycles.
📊
Key Findings & Data:For this purpose, 5 different nonwoven cleaning materials with different areal weights containing polyester and viscose fibers and produced by either calendering or through air bonding after needling process was selected as material.
💡
Conclusion & Impact:The results derived from the study indicated that through air bonded samples had better performance properties after washing cycles compared with calendered counterparts.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Dokusuz yüzey · temizlik bezi · tekrarlı yıkama

Abstract

The aim of this study is to evaluate the physical and performance properties of needled and thermal bonded nonwoven cleaning materials produced with different conditions after changing washing cycles; 0, 1, 5 and 10 cycles. For this purpose, 5 different nonwoven cleaning materials with different areal weights containing polyester and viscose fibers and produced by either calendering or through air bonding after needling process was selected as material. All the samples were washed with standard washing procedures for 1, 5 and 10 times and tested before and after washing cycles. The variation in areal weight, thickness, bulk density, abrasion resistance, bursting strength and water absorption capacity was analyzed and assessed in detail considering production process difference. The results derived from the study indicated that through air bonded samples had better performance properties after washing cycles compared with calendered counterparts.

Özet

Bu çalışmanın amacı; farklı koşullarda üretilen iğnelenmiş ve ısıl bağlanmış dokusuz yüzey temizlik bezlerinin 0, 1, 5, 10 defa yıkama sonrasındaki fiziksel ve performans özelliklerinin değerlendirilmesidir. Bu amaçla, farklı gramajlarda olan, polyester ve viskon lifi içeren ve iğnelendikten sonra ya sıcak silindirlerle ya da sıcak hava ile ısıl bağlama uygulanmış dokusuz yüzey temizlik bezi materyal olarak seçilmiştir. Bütün numuneler standart yıkama işlemi ile 1, 5 ve 10 defa yıkanıp test edilmiştir. Yıkama sonrasında; gramaj, kalınlık, yoğunluk, aşınma dayanımı, patlama mukavemeti ve su emme kapasitesi özellikleri analiz edilmiş ve üretim işlemlerindeki farklılıklar dikkate alınarak ayrıntılı olarak değerlendirilmiştir. Çalışmadan elde edilen sonuçlar, sıcak hava ile bağlama uygulanmış numunelerin sıcak silindirlerle olan eşleniklerine göre yıkamadan sonra daha iyi performans özelliklerine sahip olduklarını göstermiştir.

🔖

Cite This Article

ÇİNÇİK, E., YILDIZ, S. C., YILDIRIM, Ö. (2017). THE EFFECT OF REPEATED LAUNDERING ON PROPERTIES OF NEEDLED AND CALENDERED NONWOVEN CLEANING MATERIALS PRODUCED WITH DIFFERENT PROCESS CONDITIONS. Tekstil ve Konfeksiyon, Cilt: 27 - Sayı: 1, 60–67. https://ajindex.com/articles/46087

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. EDANA 2012 Nonwoven Production Statistics, www.edana.org, 2015
  2. Batra S. K. and Pourdeyhimi B., 2012, “Introduction to Nonwovens Technology”, Destech Publications, USA
  3. Dharmadhikary R. K., Gilmore T. F., Davis H. A., & Batra S. K., 1995, “Thermal Bonding of Nonwoven Fabrics”, The Textile Institute, Textile Progress, 26(2), New York
  4. Desai A.N., Balasubramanian N. 1994, “Critical Factors Affecting the Properties of Thermal-Bonded Nonwovens with Special Reference to Cellulosic Fibres”, Indian Journal of Fibre&Textile Research, Vol: 19, pp: 209-215
  5. Onal L., Candan C., 2003, “Contribution of Fabric Characteristics and Laundering to Shrinkage of Weft Knitted Fabrics”, Textile Research Journal, Vol: 73(3), pp: 187-191
  6. Can,Y., Akaydın M., 2013, “Effects of Laundering Process on Abrasion and Wrinkle Resistance of Cotton Plain Fabric”, Tekstil ve Konfeksiyon, Vol: 23(1), pp: 49-54
  7. Duru S. C., Candan C., 2012, “Effect of Repeated Laundering on Wicking and Drying Properties of Fabrics of Seamless Garments”, Textile Research Journal, Vol: 83(6), pp: 41-55
  8. Değirmenci Z., Çelik N., 2014, “An Investigation on the Influence of Laundering on the Dimensional Stability of the Denim-Like Knitted Fabrics”, Tekstil ve Konfeksiyon, Vol: 24(4), pp: 363-370
  9. Anand S. C., Brown K. S. M., Higgins L. G., Holmes D. A., Hall M. E. and Conrad D., 2002, “Effect of Laundering on the Dimensional Stability and Distortion of Knitted Fabrics”, AUTEX Research Journal, Vol: 2(2), pp: 85-100
  10. Palamutçu S., Keskin R., Şengül M., Devrent N., İkiz Y., Hasçelik B., “Physical Properties of Antibacterial Treated Cotton Fabrics and Effect of Laundry Cycle”, Annals of The University of Oradea Fascicle of Textiles, Leatherwork, pp: 79-82,
  11. Lau L., Fan J., Siu T., Siu L. Y. C., 2002, “Effects of Repeated Laundering on the Performance of Garments with Wrinkle-Free Treatment”, Textile Research Journal, Vol: 72(10), pp: 931-937
  12. Kwon Y. A., Sarmadi A. M., 1995, “Wettability of Nonwoven Fabrics: Effect of Laundering on Water Absorption”, Clothing and Textiles Research Journal, Vol: 13(1), pp: 17-28
  13. Sawhney P., Reynolds M., Allen C., Slopek R., Nam S., Condon B., 2012, “Effect of Laundering Hydroentangled Cotton Nonwoven Fabrics”, Journal of Engineered Fibers and Fabrics, Vol: 7(3), pp: 103-110
  14. Çinçik E., Yıldız S. C., Yıldırım Ö., The Influence of Repeated Washing