Journals / Tekstil ve Konfeksiyon / 2017 / Cilt: 27 - Sayı: 2

MODELING AND KINETIC STUDIES ON THE SPREADING PHENOMENON OF INK JET PRINTING OVER POLYESTER FABRIC

Pages
173–181
Publication Date
2017-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study represents an important contribution for the understanding of the behavior of a liquid drop after its projection on the textile support and it could constitute a prototype of the industry of ink jet printing.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The present research deals with an experimental study of the liquid drop through polyester fabric in the spreading regime with no splashing.
📊
Key Findings & Data:First, the wetting phenomenon parameters are characterized by the digidrop 3S permitting us to measure correctly the contact angle, the diameter, the height, the volume and the drop profile in contact with porous fabric during experiment time.
💡
Conclusion & Impact:This study represents an important contribution for the understanding of the behavior of a liquid drop after its projection on the textile support and it could constitute a prototype of the industry of ink jet printing.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Wetting · spreading · Liquid drop

Abstract

The present research deals with an experimental study of the liquid drop through polyester fabric in the spreading regime with no splashing. First, the wetting phenomenon parameters are characterized by the digidrop 3S permitting us to measure correctly the contact angle, the diameter, the height, the volume and the drop profile in contact with porous fabric during experiment time. Results exhibited that the liquid drop impact shows the presence of three different phases. Then, a mathematical model is developed in order to interpret the experimental data in terms of kinetic spreading, evaporation and diffusion phenomena on the porous materials. The theoretical predictions agree well with the experimental data with high correlation coefficients. It is also proved that the kinetic wetting parameters depend on the structure of the woven fabric (weft count), the drop size and the surface tension. This study represents an important contribution for the understanding of the behavior of a liquid drop after its projection on the textile support and it could constitute a prototype of the industry of ink jet printing.

🔖

Cite This Article

ROMDHANI, Z., BAFFOUN, A., HAMDAOUI, M., ROUDESLI, S. (2017). MODELING AND KINETIC STUDIES ON THE SPREADING PHENOMENON OF INK JET PRINTING OVER POLYESTER FABRIC. Tekstil ve Konfeksiyon, Cilt: 27 - Sayı: 2, 173–181. https://ajindex.com/articles/46075

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (19)

  1. Adamson, A.W. (1990). Physical Chemistry of Surfaces, 5th ed., John Wiley and Sons, New York, 493
  2. Marmur, A., (1996). Contact angle: wettability and adhesion, Colloids and surface A., 116, 55-61
  3. Hiemenz, P. and Rajagopalan, R., (1997). Principles of colloids and surfaces chemistry, Third Edition, New York,
  4. Washburn, E. W., (1921). The dynamic of capillary flow, Physical Review Letters, 17, 273-283
  5. Bell, J. M. and Cameron, F. K., (1906). The flow of liquids through capillary spaces, Journal of Physical Chemistry, 10(8), 658-674
  6. Lucas, R., (1918). Ueber das Zeitgesetz des kapillaren Aufstiegs von Flussigkeiten, Kolloid Z., 23, 15-22
  7. PeekJr, R. L. and McLean, D. A., (1934). capillary penetration of fibrous materials, Industrial and Engineering Chemistry: Analytical Edition, 6(2), 85-90
  8. Gillespie, T., (1958). Detergency: Theory and technology, Journal of Colloids and Interface Science, 13, 32-40
  9. Holman, K., M.J. Cima, Uhland, S. A., and Sachs, E., (2002). Spreading and infiltration of inkjet- printed polymer solution droplets on a porous substrate, Journal of Colloids Interface Science, 249, 432-440
  10. Alleborn, N. and Raszillier, H., (2004). Spreading and sorption of droplets on layered porous substrates, Journal of Colloids and Interface Science, 280, 449-464
  11. Style, R.W., Isa, L., and Dufresne, E. R., (2015). Adsorption of soft particles at fluid interfaces, Soft Matter., 11(37), 7412-419
  12. Kumar, S. M. and Deshpande, A. P., (2006). Dynamics of drop spreading on fibrous porous media, Colloids and Surfaces A., 277, 157-163
  13. Carlson, A., Royal Institute of Technology, Department of Mechanics SE-100 44 Stockholm, Sweden, Thesis, 2012
  14. Wenzel, R. N., (1936). Resistance of solid surfaces to wetting by water, Industrial and Engineering Chemistry Research, 28(8), 988-994
  15. Teletzke, G. F., Davis, T. H., and Scriven, L. E., (1987) Wetting hydrodynamics, Chemical Engineering Communications, 55, 41-81
  16. Kubiak, K.J., Wilson, M.C.T., Mathia, T.G., and Carval, Ph., (2011) Wettability versus roughness of engineering surfaces, Wear, 271(3-4), 523-528
  17. Harju, M., Levanen, E., and Mantyla, T., (2006). Wetting behavior of plasma sprayed oxide coatings, Applied Surface Science, 252, 8514-8520
  18. Nosonovsky, M., and Bhushan, B., Biologically Inspired Surfaces: Broadening the Scope of Roughness Advanced Functional Materials, 18, (2008), 843- 855
  19. Roach, P., Shirtcliffe, N. J., and Newton, M.I., (2008). Progres