SavedAdd your journal

Journals / Balkan Journal of Electrical and Computer Engineering / 2020 / Cilt: 8 - Sayı: 4

Design and Implementation of a Network Based Multi-Axis Motion Control System for Laboratory Studies

YILMAZ GÜVEN
SELÇUK ATİŞ
Pages
291–299
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been observed from the results of this survey that learner - centered approach with the experimental set contribute in learning process positively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, an open source network based three axis motion control system has been designed and implemented to be used within motion control courses at engineering and technical branches for applicational studies.
📊
Key Findings & Data:This experimental set has been evaluated by 107 students in related courses which are electrical machines and servo systems.
💡
Conclusion & Impact:It has been observed from the results of this survey that learner - centered approach with the experimental set contribute in learning process positively.
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, an open source network based three axis motion control system has been designed and implemented to be used within motion control courses at engineering and technical branches for applicational studies. This system has been developed by using open source code and suitable physical structure for engineering studies. This experimental set has been evaluated by 107 students in related courses which are electrical machines and servo systems. Students have conducted various experiments by using single, two and three axes respectively. These students have been subjected to a Learner Satisfaction Survey which focuses on cognitive, affective and psychomotor extend of experimental studies in the laboratory with the designed motion control system. It has been observed from the results of this survey that learner - centered approach with the experimental set contribute in learning process positively.

🔖

Cite This Article

GÜVEN, Y., ATİŞ, S. (2022). Design and Implementation of a Network Based Multi-Axis Motion Control System for Laboratory Studies. Balkan Journal of Electrical and Computer Engineering, Cilt: 8 - Sayı: 4, 291–299. https://ajindex.com/articles/460545

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. W. Haifang, R. Yu, L. Shengtao, and C. Jinhua, Fieldbus technology and rolling process automation,Computer Design and Applications (ICCDA), 2010 International Conference on, 25-27 June 2010, 2010, pp. 73-76
  2. Y. Bian, X. Xu, and L. Zhu, Variable frequency hydraulic speed control system based on CANopen,Education Technology and Computer (ICETC), 2010 2nd International Conference on, 22-24 June 2010, 2010, pp. 264-268
  3. J. Yang, Z. Y. Liu, X. Bi, and Y. Sun, 'The Research and Design of High Precision Contour Machining for Multi-Axis Motion Control', 2015 Chinese Automation Congress (CAC), 2015, pp. 1594-1599
  4. C. L. Lin, W. H. Chu, and W. Gai, Research on the Synchronization Motion Control Technology for Multi-axis System, 2016 Ieee Information Technology, Networking, Electronic and Automation Control Conference (Itnec), 2016, pp. 672-679
  5. S. Vitturi, L. Peretti, L. Seno, M. Zigliotto, and C. Zunino, Real-time Ethernet networks for motion control, Computer Standards & Interfaces, 33(5), 2011, pp. 465-476
  6. M. R. Jathar, RS-485 based multi axis motor controller,Electronics Computer Technology (ICECT), 2011 3rd International Conference on, 8-10 April 2011, 2011, pp. 104-106
  7. G. GuoYing, Z. LiMin, X. Zhenhua, and D. Han, Design of a Distributed Multiaxis Motion Control System Using the IEEE-1394 Bus, IEEE Transactions on Industrial Electronics, 57(12), 2010, pp. 4209-4218
  8. C. Bing, C. You-Ping, X. Jing-Ming, Z. Zu-De, and S. Ji-Ming, Control methodologies in networked motion control systems,Machine Learning and Cybernetics, 2005. Proceedings of 2005 International Conference on, 18-21 Aug. 2005, 2005, pp. 1088-1093
  9. O. Mirabella, M. Brischetto, and A. Raucea, A network based virtual lab for motion control applications,Advanced Motion Control, 2008. AMC '08. 10th IEEE International Workshop on, 26-28 March 2008, 2008, pp. 342-347
  10. M. Valles, J. L. Diez, J. L. Navarro, and A. Valera, Remote Access to MATLAB-based Laboratories: Application to the Fuzzy Control of a DC Motor, International Journal of Engineering Education, 26(6), 2010, pp. 1343-1353
  11. J. Sibigtroth and E. Montanez, Motor control demonstration lab, International Journal of Engineering Education, 21(1), 2005, pp. 84-93
  12. A. Rojko, D. Hercog, and K. Jezernik, Power Engineering and Motion Control Web Laboratory: Design, Implementation, and Evaluation of Mechatronics Course, IEEE Transactions on Industrial Electronics, 57(10), 2010, pp. 3343-3354
  13. M. A. V