The results revealed that chitosan particles were encapsulated in the as-spun PCL fibers with using acetone as the solvent resulted in reduced antibacterial activities Contrarily, when FA is used as the solvent, CHI and PCL were dissolved and blended very well, and enhanced antibacterial activities were obtained from as-spun PCL/CHI nano/micro fibers.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:Chitosan (CHI) blended polycaprolactone (PCL) nano/micro fibers were prepared with different CHI content via electrospinning procedure.
📊
Key Findings & Data:Effect of the solvent on the electrospinability of the blend, final nano/micro fiber morphologies, chemical and thermal properties and antibacterial activities were investigated with SEM, FTIR, DSC, and ASTM 2149 01 Standard Dynamic Contact Conditions.
💡
Conclusion & Impact:The results revealed that chitosan particles were encapsulated in the as-spun PCL fibers with using acetone as the solvent resulted in reduced antibacterial activities Contrarily, when FA is used as the solvent, CHI and PCL were dissolved and blended very well, and enhanced antibacterial activities were obtained from as-spun PCL/CHI nano/micro fibers.
Chitosan (CHI) blended polycaprolactone (PCL) nano/micro fibers were prepared with different CHI content via electrospinning procedure. Two different solvents, acetone and formic acid (FA) were used to dissolve and blend the polymers before electrospinning process. Effect of the solvent on the electrospinability of the blend, final nano/micro fiber morphologies, chemical and thermal properties and antibacterial activities were investigated with SEM, FTIR, DSC, and ASTM 2149 01 Standard Dynamic Contact Conditions. The results revealed that chitosan particles were encapsulated in the as-spun PCL fibers with using acetone as the solvent resulted in reduced antibacterial activities Contrarily, when FA is used as the solvent, CHI and PCL were dissolved and blended very well, and enhanced antibacterial activities were obtained from as-spun PCL/CHI nano/micro fibers.
TURSUCULAR, O. F., CERKEZ, İ., ORHAN, M., AYKUT, Y. (2018). PREPERATION AND ANTIBACTERIAL INVESTIGATION OF POLYCAPROLACTONE/CHITOSAN NANO/MICRO FIBERS BY USING DIFFERENT SOLVENT SYSTEMS. Tekstil ve Konfeksiyon, Cilt: 28 - Sayı: 3, 221–228. https://ajindex.com/articles/46014
Siedenbiedel F., Tiller J-C., 2012, “Antimicrobial Polymers in Solution and on Surfaces: Overview and Functional Principles”, Polymers, 4(1), pp:46-71
Simoncic B., Tomsic B., 2010, “Structures of Novel Antimicrobial Agents for Textile a Review” Textile Research Journal, 80 (16), pp:1721-1737
Hurt A. P., Kotha A. K., Trivedi V., Coleman, N. J. 2015. “Bioactivity, biocompatibility and antimicrobial properties of a chitosan-mineral composite for periodontal tissue regeneration.” Polimeros, 25 (3), pp:311-316
Croisier F., Atanasova G., Poumay Y. and Jerome C. 2014, “Polysaccharide-coated PCL nano/micro fibers for wound dressing applications”, Advanced Healthcare Materials, 3(12), pp:2032-2039
Kim G. H. 2008, “Electrospun PCL nano/micro fibers with anisotropic mechanical properties as a biomedical scaffold”, Biomedical materials, 3(2), pp: 25010
Ghasemi-Mobarakeh L., Prabhakaran M. P., Morshed M., Nasr-Esfahani M. H. and Ramakrishna, S. 2010, “Bio-functionalized PCL nanofibrous scaffolds for nerve tissue engineering”, Materials Science and Engineering: C, 30(8), pp: 1129-1136
Zamani M., Morshed M., Varshosaz J. and Jannesari M. 2010, “Controlled release of metronidazole benzoate from poly ε-caprolactone electrospun nano/micro fibers for periodontal diseases”, European Journal of Pharmaceutics and Biopharmaceutics, 75(2), pp: 179-185
Nottelet B., Pektok E., Mandracchia D., Tille J.-C., Walpoth B., Gurny R. and Moeller M. 2009, “Factorial design optimization and in vivo feasibility of poly(ε-caprolactone)-micro- and nanofiber-based small diameter vascular grafts”, Journal of Biomedical Materials Research Part A, 89A(4), pp: 865-875
Cooper A., Oldinski R., Ma H., Bryers J. D. and Zhang M. 2013, “Chitosan-based nanofibrous membranes for antibacterial filter applications”, Carbohydrate Polymers, 92(1), pp: 254-259
Van der Schueren L., Steyaert I., De Schoenmaker B. and De Clerck, K. 2012, “Polycaprolactone/chitosan blend nanofibres electrospun from an acetic acid/formic acid solvent system”, Carbohydrate Polymers, 88(4), pp: 1221-1226
Sarasam A. R., Krishnaswamy R. K. and Madihally S. V. 2006, “Blending Chitosan with Polycaprolactone: Effects on Physicochemical and Antibacterial Properties”, Biomacromolecules, 7(4), pp: 1