Journals / Tekstil ve Konfeksiyon / 2018 / Cilt: 28 - Sayı: 4

EVALUATION OF ANTIBACTERIAL, MECHANICAL, AND COMFORT PROPERTIES OF WOVEN FABRICS CONSIST OF COTTON, BAMBOO, AND SILVER FIBERS

Pages
304–310
Publication Date
2018-12-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the outputs of the research, the mechanical and comfort properties can be improved and the antibacterial activities can be obtained of shirting and bedding fabrics by differing weft yarn type and density.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, experimental and statistical evaluation of antibacterial, mechanical, and comfort properties of woven fabrics consisting of cotton, bamboo and silver yarns were presented.
📊
Key Findings & Data:Statistical evaluations were performed by one way ANOVA and Tukey HSD and Tamhane’s T2 test methods.
💡
Conclusion & Impact:According to the outputs of the research, the mechanical and comfort properties can be improved and the antibacterial activities can be obtained of shirting and bedding fabrics by differing weft yarn type and density.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:woven fabrics · antibacterial activity · comfort properties

Abstract

In this study, experimental and statistical evaluation of antibacterial, mechanical, and comfort properties of woven fabrics consisting of cotton, bamboo and silver yarns were presented. For the purpose of the study; cotton-bamboo and cotton-silver blended fabrics were produced, mechanical properties (such as tensile strength and tear strength) were investigated, antibacterial activities were determined, and thermal comfort properties (such as thermal conductivity, thermal absorption, thermal resistance, air permeability, water vapor permeability, and water vapor resistance) were measured. Statistical evaluations were performed by one way ANOVA and Tukey HSD and Tamhane’s T2 test methods. According to the outputs of the research, the mechanical and comfort properties can be improved and the antibacterial activities can be obtained of shirting and bedding fabrics by differing weft yarn type and density.

🔖

Cite This Article

TAYYAR, A. E., D.TETİK, G., ABAK, E. (2018). EVALUATION OF ANTIBACTERIAL, MECHANICAL, AND COMFORT PROPERTIES OF WOVEN FABRICS CONSIST OF COTTON, BAMBOO, AND SILVER FIBERS. Tekstil ve Konfeksiyon, Cilt: 28 - Sayı: 4, 304–310. https://ajindex.com/articles/46004

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Zupin Z. and Dimitrovski K., 2010, “Mechanical Properties of Fabrics Made from Cotton and Biodegradable Yarns Bamboo, SPF, PLA in weft”, Woven Fabric Engineering, Polono Dobnik Dubrovski (Ed.), IntechOpen, pp: 25-46
  2. Mishra R., Behera BK., Pal BP., 2012, “Novelty of Bamboo Fabric”, The Journal of The Textile Institute, Vol: 103(3), pp: 320-329
  3. Celep G., 2015, “Novel Study of Developing Models of Comfort Properties of Textile Products Made of Hollow Yarns”, PhD Thesis, Usak University Graduate School of Natural and Applied Sciences, 155p
  4. Erdumlu N. and Sarıçam C, 2016, “Investigating the effect of some fabric parameters on the thermal comfort properties of flat knitted acrylic fabrics for winter wear”, Textile Research Journal, Vol: 87, pp: 1349-1359
  5. Özgen B. and Altaş S, 2014, “The Investigation of Thermal Comfort, Moisture Management and Handle Properties of Knitted Fabrics Made of Various Fibres, Tekstil ve Konfeksiyon, Vol: 24(3), pp 272-278
  6. Oglakcioglu N., Celik P., Ute TB., Marmarali A., Kadioglu H., 2009, “Thermal Comfort Properties of Angora Rabbit/Cotton Fiber Blended Knitted Fabrics”, Textile Research Journal, Vol: 79, pp: 888-894
  7. Chidambaram P. and Govindan R., 2012, “Influence of Blend Ratio on Thermal Properties of Bamboo/Cotton Blended Woven Fabrics”, Silpakorn U Science & Tech Journal, Vol: 6, pp: 49-55
  8. Kakvan A., Najar SS., Psikuta A., 2015, “Study on effect of blend ratio on thermal comfort properties of cotton/nylon-blended fabrics with high-performance Kermel fibre”, The Journal of The Textile Institute, Vol: 106, pp: 674-682
  9. Erenler A. and Oğulata R., 2015, “Investigation and Prediction of Chosen Comfort Properties on Woven Fabrics for Clothing, TEkstil ve Konfeksiyon, Vol: 25(2), pp125-134
  10. Özdemir H., 2017, “Thermal Comfort Properties of Clothing Fabrics Woven With Polyester/Cotton Blend Yarns”, Autex Research Journal, Vol: 17, pp: 135-141
  11. Uzun M., 2012, “An Investigation of the Effects of Ultrasonic and Traditional Washing Methods on Thermal Comfort Properties of Woven Fabrics”, Tekstil ve Mühendis, Vol: 19, pp: 1-6
  12. Shaker K., Ashraf M., Jabbar M., Shahid S., Nawab Y., Zia J, Rehman A., 2016, “Bioactive woven flax-based composites: Development and characterization”, Journal of Industrial Textiles, Vol: 46, pp: 549-561
  13. Dastjerdi R., Mojtahedi MRM., Shoshtari AM., Khosroshahi A., Moayed AJ., 2009, “Fiber to Fabric Processability of Silver/Zinc-loaded Nanocomposite Yarns”, Textile Rese