SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2018 / Cilt: 28 - Sayı: 4

EXPERIMENTAL INVESTIGATION OF THE TENSILE AND IMPACT PROPERTIES OF TWILL AND TWILL DERIVATIVE WOVEN FABRIC REINFORCED COMPOSITES

Hakan Özdemir
Bülent Murat Içten
Akar Doğan
Pages
258–272
Publication Date
2018-12-29
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is also observed that 3/1 twill woven fabric reinforced composite has the lowest impact strengths at the highest deflections; whereas, 3/3 twill woven fabric reinforced composite has the highest impact strengths at the lowest deflections.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years the use of woven composites in structural applications has increased rapidly due to the advantages it offers such as easy handling, dimensional stability, deep drawing shape-ability, enhanced toughness and increased impact resistance.
📊
Key Findings & Data:The experimental results reveal that the average float length and weave interlacing coefficient, which are determined by weave pattern, significantly affect the tensile and impact properties of the composites.
💡
Conclusion & Impact:It is also observed that 3/1 twill woven fabric reinforced composite has the lowest impact strengths at the highest deflections; whereas, 3/3 twill woven fabric reinforced composite has the highest impact strengths at the lowest deflections.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:composites · twill weave · tensile strength

Abstract

In recent years the use of woven composites in structural applications has increased rapidly due to the advantages it offers such as easy handling, dimensional stability, deep drawing shape-ability, enhanced toughness and increased impact resistance. Mechanical properties in textile composites are closely connected with the textile reinforcement’s internal structure. This paper reports and discusses a study of the tensile and impact properties of the twill and twill derivative woven fabric reinforced composites. Tensile strength, modulus of elasticity and elongation at break values of the composites were found by tensile tests. In addition impact tests are performed on specimens of woven fabric reinforced composite laminates in order to measure impact strength and characterize damage mechanisms at diverse impact energies. The experimental results reveal that the average float length and weave interlacing coefficient, which are determined by weave pattern, significantly affect the tensile and impact properties of the composites. It is observed that 3/1 twill woven fabric reinforced composite showed the best performance in tensile tests along warp and weft directions. It is also observed that 3/1 twill woven fabric reinforced composite has the lowest impact strengths at the highest deflections; whereas, 3/3 twill woven fabric reinforced composite has the highest impact strengths at the lowest deflections.

🔖

Cite This Article

Özdemir, H., Içten, B. M., Doğan, A. (2018). EXPERIMENTAL INVESTIGATION OF THE TENSILE AND IMPACT PROPERTIES OF TWILL AND TWILL DERIVATIVE WOVEN FABRIC REINFORCED COMPOSITES. Tekstil ve Konfeksiyon, Cilt: 28 - Sayı: 4, 258–272. https://ajindex.com/articles/45999

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Başer G., 2004, “Technique and Art of Weaving”, Vol: 1, Punto Publishing, İzmir (in Turkish)
  2. Adumitroaie A. and Barbero E.J., 2012, "Stiffness and Strength Prediction for Plain Weave Textile Rein-forced Composites", Mechanics of Advanced Materials and Structures, Vol: 19(1-3), pp: 169-183
  3. Chen, G. and Ding X., 2006, "Breaking Progress Simulation and Strength Prediction of Woven Fabric under Uni-Axial Tensile Loading", Textile Research Journal, Vol: 76(12), pp: 875-882
  4. Dabiryan H., Jeddi A.A.A. and Rastgo A., 2010, "The Influence of Frictional Energy on the Load-Extension Behavior of Plain Woven Fabrics", Textile Research Journal, Vol: 80(20), pp: 2223-2229
  5. Bilisik K., Karaduman N. and Bilisik N.E., 2016, “Chapter 3: Fibre Architectures for Composite Applica-tions”, Book Title: Fibrous and Textile Materials for Composite Applications, Ed: Raul Fangueiro and Sohel Rana, Springer Science+Business Media, Singapore, pp: 75-134
  6. Adanur S. and Onal L., 2001, "Factors Affecting the Mechanical Properties of Laminated Glass/Graphite-Epoxy Hybrid Composites", Journal of Industrial Textiles, Vol: 31(2), pp: 123-133
  7. Pothan L.A., Mai Y., Thomas S. and Li R., 2008, "Tensile and Flexural Behavior of Sisal Fabric/Polyester Textile Composites Prepared by Resin Transfer Molding Technique", Journal of Reinforced Plastics and Composites, Vol: 27(16-17), pp: 1847-1866
  8. Shonaike G.O., Lang Y. and Odusanya S., 2000, "A Preliminary Investigation of Tensile Properties of Glass-Mat Woven-Fabric-Reinforced Thermoplastic Elastomer Composites", Journal of Thermoplastic Composite Materials, Vol: 13(2), pp: 102-118
  9. Chen X., Spola M., Paya J.G. and Sellabona P.M., 1999, "Experimental Studies on the Structure and Mechani-cal Properties of Multi-Layer and Angle-Interlock Woven Structures", Journal of the Textile Institute, Vol: 90(1), pp: 91-99
  10. Perumalraj R., Dasaradhan B. and Nalankilli G., 2010, "Copper, Stainless Steel, Glass Core Yarn, and Ply Yarn Woven Fabric Composite Materials Properties", Journal of Reinforced Plastics and Composites, Vol: 29(20), pp: 3074-3082
  11. Karahan M., 2011, "Investigation of Damage Initiation and Propagation in 2× 2 Twill Woven Carbon/Epoxy Multi-Layer Composites", Textile Research Journal, Vol: 81(4), pp: 412-428
  12. Abot J.L., Gabbai R.D. and Harsley K., 2011, "Effect of Woven Fabric Architecture on Interlaminar Mechani-cal Response of Composite Materials: An Experimental Study", Journal of Reinforced Plastics and