Journals / Avrupa Bilim ve Teknoloji Dergisi / 2020 / Cilt: 0 - Sayı: 19

Design and Performance Analyze of PID/PD Controller to Perform Speed Control of Brushless DC Motors

Fırçasız Doğru Akım Motorlarının Hız Kontrolünü Gerçekleştirmek İçin PID/PD Kontrolcü Tasarımı ve Performans İncelemesi

Pages
145–155
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it was observed that BOA-PID performed better than PID results obtained by other methods, while BOA-PID PD performed better than all studies using PID.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The usage of brushless DC motors (BLDC) is increasing day by day due to its advantages such as providing constant mechanical torque and high power density.
📊
Key Findings & Data:The system designed with PID/PD controller has been compared with the system designed with PID controller systems in terms of performance criteria such as maximum overshoot, settling time and rise time.
💡
Conclusion & Impact:As a result, it was observed that BOA-PID performed better than PID results obtained by other methods, while BOA-PID PD performed better than all studies using PID.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The usage of brushless DC motors (BLDC) is increasing day by day due to its advantages such as providing constant mechanical torque and high power density. As the use of BLDC motors becomes widespread, a number of new studies have been introduced in terms of control of these motors In our study, firstly the PID control of the BLDC motor was performed to reduce the values such as the maximum overshoot and the settling time at the output, and the controller's parameters were obtained by the Whale Optimization Algorithm (WOA). The results were compared with the results of the system with the same parameters of the BLDC motor in the literature using PID controllers optimized by the genetic algorithm (GA), particle swarm optimization (PSO), LQR and LQ methods. In addition, PID/PD controller was utilized instead of PID for the same system and WOA was again used to determine parameters. The system designed with PID/PD controller has been compared with the system designed with PID controller systems in terms of performance criteria such as maximum overshoot, settling time and rise time. Then, in order to perform the dynamic test of both PID and PID/PD controllers, the speed of the motor was increased and the results were obtained, examined and compared with each other. As a result, it was observed that BOA-PID performed better than PID results obtained by other methods, while BOA-PID PD performed better than all studies using PID.

Özet

Fırçasız doğru akım (FDA) motorlarının kullanımı, düzgün mekanik tork sağlaması ve yüksek güç yoğunluğuna sahip olması gibiavantajlarından dolayı günden güne artmaktadır. FDA motorlarının kullanımı yaygınlaştıkça bu motorların kontrolü ile ilgili yeniçalışmalar ortaya konmaktadır. Bizim çalışmamızda, çıkıştaki maksimum aşma miktarı ve oturma zamanı gibi değerlerin düşürülmesiamacıyla ilk olarak FDA motorun PID kontrolü yapılmış ve kontrolcünün parametreleri Balina Optimizasyon Algoritması (BOA) ileelde edilmiştir. Elde edilen sonuçlar literatürde aynı parametrelere sahip FDA motorun genetik algoritma (GA), parçacık sürüoptimizasyonu (PSO), LQR ve LQ yöntemleri ile optimize edilen PID kontrolcülerinin kullanıldığı sistemin sonuçları ilekarşılaştırılmıştır. Bunun yanında PID yerine PID/PD kontrolcü kullanılarak aynı sistemin kontrolü tekrar yapılmış ve parametrelerinbelirlenmesi için yine BOA’dan faydalanılmıştır. PID/PD kontrolcü ile tasarlanan sistem; maksimum aşma, oturma zamanı veyükselme zamanı gibi performans kriterleri açısından PID kontrolcülü sistemlerle karşılaştırılmıştır. Ardından hem PID hem dePID/PD kontrolcülerin dinamik testini gerçekleştirmek amacıyla motorun hızı artırılarak sonuçlar elde edilmiş, irdelenmiş ve birbirleriile karşılaştırılmıştır. Sonuçlara bakıldığında ise BOA-PID’nin diğer yöntemlerle elde edilen PID sonuçlarından daha iyi performansgösterdiği, BOA-PID/PD’nin ise PID’nin kullanıldığı tüm çalışmalardan daha iyi performans sergilediği görülmüştür.

🔖

Cite This Article

TABAK, A. (2022). Design and Performance Analyze of PID/PD Controller to Perform Speed Control of Brushless DC Motors. Avrupa Bilim ve Teknoloji Dergisi, Cilt: 0 - Sayı: 19, 145–155. https://ajindex.com/articles/457740

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Ai, L., Ramachandaramurthy, V. K., Walker, S. L., & Taylor, P. (2019). Optimal placement and sizing of battery energy storage system for losses reduction using whale optimization algorithm. Journal of Energy Storage, 26(May), 100892. https://doi.org/10.1016/j.est.2019.100892
  2. Ansari, U., Alam, S., & Jafri, S. M. U. N. (2011). Modeling and control of three phase BLDC motor using PID with genetic algorithm. Proceedings - 2011 UKSim 13th International Conference on Modelling and Simulation, UKSim 2011, 189–194. https://doi.org/10.1109/UKSIM.2011.44
  3. Anwar, M. N., & Pan, S. (2013). Synthesis of the PID controller using desired closed-loop response. In IFAC Proceedings Volumes (IFAC-PapersOnline) (Vol. 10). https://doi.org/10.3182/20131218-3-IN-2045.00023
  4. Cao, Y., Li, Y., Zhang, G., Jermsittiparsert, K., & Nasseri, M. (2020). An efficient terminal voltage control for PEMFC based on an improved version of whale optimization algorithm. Energy Reports, 6, 530–542. https://doi.org/10.1016/j.egyr.2020.02.035
  5. Goldbogen, J. A., Friedlaender, A. S., Calambokidis, J., McKenna, M. F., Simon, M., & Nowacek, D. P. (2013). Integrative Approaches to the Study of Baleen Whale Diving Behavior, Feeding Performance, and Foraging Ecology. BioScience, 63(2), 90– 100. https://doi.org/10.1525/bio.2013.63.2.5
  6. GRIGORIE, T. L., KHAN, S., BOTEZ, R. M., MAMOU, M., & MÉBARKI, Y. (2019). Design and experimental testing of a control system for a morphing wing model actuated with miniature BLDC motors. Chinese Journal of Aeronautics. https://doi.org/10.1016/j.cja.2019.08.007
  7. Hajİsalm, A., & Altaş, İ. H. (2014). Hibrit Rüzgar / F V Enerji Sistemleri İçin P ID Denetleyici Parametrelerinin PSO ve GA ile Optimizasyonu Optimization of PID Controller Parameters in Wind / PV Energy Systems Using PSO and GA Elektrik - Elektronik Mühendisliği Bölümü Elektrik - Elektronik. 27–29.
  8. Ibrahim, H. E. A., Hassan, F. N., & Shomer, A. O. (2014). Optimal PID control of a brushless DC motor using PSO and BF techniques. Ain Shams Engineering Journal, 5(2), 391–398. https://doi.org/10.1016/j.asej.2013.09.013
  9. Kim, C. H., Yang, J. H., Lim, D. G., & Suh, B. S. (2010). An enhanced PID controller for speed control of brushless DC motors based on convex set optimization. IFAC Proceedings Volumes (IFAC-PapersOnline), 8(PART 1), 75–80. https://doi.org/10.3182/20100929-3-ro-4017.00014
  10. Kumar, B., Swain, S. K., & Neogi, N. (2017). Controller design for closed loop speed control of BLDC motor. International Journal on Electrica