Journals / Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi / 2007 / Cilt: 17 - Sayı: 1

Beş farklı materyalinin çapsal gerilim, bükülme ve sıkıştırma direncinin karşılaştırılması

Comparison of dimetral tensile,flexural,and compressive strengths of five core buıld-up materials

Pages
18–23
Publication Date
2022-10-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results of this study indicated that the diametral tensile strength, flexural strength and compressive strength of the resin composite (President) and amalgam material were significantly higher than the other tested materials (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this laboratory investigation was to evaluate three mechanical properties; the compressive, diametral tensile and flexural strengths of five different core build-up materials.
📊
Key Findings & Data:In this study, a light-actived Hybrid composite resin (President), resin modified glass ionomer (RMGIC) (Vitremer), amalgam (Cavex avalloy), glass-ionomer (GIC) (Logofil) and compomer (Dyract AP) restorative materials were used. 120 samples were prepared according to American Dental Association specification No. 27 for testing diametral tensile strength (DTS), compressive strength (CS) and flexural strength (FS).
💡
Conclusion & Impact:The results of this study indicated that the diametral tensile strength, flexural strength and compressive strength of the resin composite (President) and amalgam material were significantly higher than the other tested materials (p
🔬Design:Research Article
📍Scope:120 samples
⚙️Variables:Domain Parameters

Abstract

The purpose of this laboratory investigation was to evaluate three mechanical properties; the compressive, diametral tensile and flexural strengths of five different core build-up materials. In this study, a light-actived Hybrid composite resin (President), resin modified glass ionomer (RMGIC) (Vitremer), amalgam (Cavex avalloy), glass-ionomer (GIC) (Logofil) and compomer (Dyract AP) restorative materials were used. 120 samples were prepared according to American Dental Association specification No. 27 for testing diametral tensile strength (DTS), compressive strength (CS) and flexural strength (FS). Forty specimens were prepared in cylindric molds (6 mm in height, 3 mm in diameter) for the CS measurements and forty specimens (3 mm in height, 6 mm in diameter) for diametral tensile strength (DTS). Forty specimens were prepared (25X 2X2 mm) for the FS measurements. All cores materials were prepared according to manufacturers instruction at a temperature of 23.0 +/-1.0 degrees C. Haunsfieldpress and pull machine was used for compressive and flexural strength and the module were determined at a crosshead speed of 0.5 mm/min. Diametral testing was carried out at 1 mm/min. Analysis of variance was used for statistically evaluation. Mean compressive, diametral tensile and flexural strengths with associated standard deviations were calculated for each material. The results of this study indicated that the diametral tensile strength, flexural strength and compressive strength of the resin composite (President) and amalgam material were significantly higher than the other tested materials (p

Özet

Bu çalışmanın amacı, beş farklı kor materyalinin üç mekanik özelliği; çapsal germe direnci, sıkıştırma direnci ve bükülme direncini değerlendirmektir. Bu çalı şma için, ışıkla sertleşen hibrid kompozit rezin (President, Light cure Dynamic Universal hibr/'t Compozit, München, Germany), rezin modifiye cam iyonomer (Vitremer, 3M Dental Products, St. Paul MN, USA), amalgam(Cavex Avalloy, Harlem, Hollanda), cam iyonomer (Logofil, D-Dental Alten, Alien Walde, Germany) ve compomer (Dyract AP) materyalleri kullanıldı. Çapsal germe direnci, sıkıştırma direnci ve bükülme direnci testi için toplam 120 örnek American Dental Association 27 nolu spesifikasyonuna göre hazırlandı. 6mm yüksekliğinde ve 3mm çapında 40 silindirik örnek, çapsal germe direnci için ve 25X2X2 mm boyutlarında 40 örnek ise bükülme direnci testi için hazırlandı. Tüm kor materyalleri üretici firma önerileri doğrultusunda 23.0 +/- 1.0 °C'de hazırlandı. Testler Hounsfield çekme-sıkıştırma makinesinde, bükülme ve sıkıştırma gerilim testleri 0.5 mm/dak. ve çapsal gerilim testi için 1 m m/dak. başlık hızı ile yapıldı. İstatistiksel değerlendirme için varyans analizi kullanıldı. Her bir materyal için Çapsal germe direnci, sıkıştırma direnci ve bükülme direncine ait ortalama ve standart sapma değerleri hesaplandı. Çalışmanın sonuçlarına göre Çapsal germe direnci, sıkıştırma direnci ve fleksural gerilim direnci açısından Kompozit resin (President) ve Amalgam (Cavex avalloy), diğer test edilen materyallere göre önemli derecede yüksek bulundu. (p

🔖

Cite This Article

BAYINDIR, F., YILMAZ, C. B. (2022). Beş farklı materyalinin çapsal gerilim, bükülme ve sıkıştırma direncinin karşılaştırılması. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, Cilt: 17 - Sayı: 1, 18–23. https://ajindex.com/articles/452719

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (18)

  1. Chan K, Azarbal P, Kerber P. Bond strength of cements to crown bases. J Prosthet Dent 1981; 46:297
  2. Combe EC, Shaglouf AM, Watts DC, Wilson NH. Mechanical properties of direct core build-up materials. Dent Mater 1999; 15:158-165
  3. Huysmans MC, Van der Varst PG. Finite element analysis of quasistatic and fatigue failure of post and cores. J Dent. 1993; 21:57-64
  4. Huysmans MC, Van der Varst PG. Mechanical longevity estimation model for post-and-core restorations. Dent Mater 1995; 11:252-257
  5. Nicholls JI. Crown retention. II. The effect of convergence angle variation on the computed stresses in the luting agent. J Prosthet Dent 1974; 31:651-657
  6. Yettram At, Wright KW, Pickard HM. Finite element stress analysis of the crowns of normal and restored teeth. J Dent Res 1976;55:1004-1011
  7. Craig RG, Fa rah JW. Stress analysis and design of single restorations and fixed bridges. Oral Sci Rev 1977; 10:45-74
  8. Cho GC, Kaneko LM, Donovan TE, White SN. Diametral and compressive strength of dental core materials. J Prosthet Dent 1999; 82:272-276
  9. Levartovsky S, Kuyinu E, Georgescu M, Goldstein GR. A comparison of the diametral tensile strength, the flexural strength, and the compressive strength of two new core materials to a silver alloy-reinforced glass-ionomer material. J Prosthet Dent 1994; 72:481-485
  10. Kovarik RE, Breeding LC, Caughman WF. Fatigue life of three core materials under simulated chewing conditions. J Prosthet Dent 1992;68:584-590
  11. Netti CA, Cunningham DE, Latta GH. Tensile strengths of composite core materials containing added colorants. J Prosthet Dent 1988;59:547-552
  12. Jordan RE, Suzuki M, Davidson DF. Clinical evaluation of a universal dentin bonding resin: preserving dentition through new materials. J Am Dent Assoc 1993; 124:71-76
  13. Gateau P, Sabek M, Dailey B. Fatigue testing and microscopic evaluation of post and core restorations under artificial crowns. J Prosthet Dent 1999; 82:341-347
  14. Wilson AD, Kent BE. A new translucent cement for dentistry. The glass ionomer cement. Br Dent J 1972; 132:133-135
  15. Swartz ML, Phillips RW, Clark HE. Long-term F release from glass ionomer cements. J Dent Res 1984; 63:158-160
  16. Lace field WR, Reindl MÇ Retief DH. Tensile bond strength of a glass-ionomer cement. J Prosthet Dent 1985; 53:194-198
  17. Craig RG. Restorative dental materials. 7th ed. St Louis: CV Mosby; 1985:225-252
  18. Lloyd CH, Mitchell L. The fracture toughness of tooth coloured restorative materials