Journals / Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi / 2017 / Cilt: 27 - Sayı: 1

FRACTURE STRENGTH EVALUATION OF CAD/CAM LAMINATE VENEERS PREPARED WITH DIFFERENT METHODS AND DIFFERENT CEMENT THICKNESSES

FARKLI PREPARASYON TEKNİKLERİ VE FARKLI SİMAN ARALIKLARINDA HAZIRLANAN CAD/CAM LAMİNATE VENEERLERİN KIRILMA DAYANIMLARININ DEĞERLENDİRİLMESİ

Pages
12–18
Publication Date
2022-10-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Fracture strength increases as cement thickness reduced

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim: The aim of this investigation is to evaluate fracture resistance of veneer materials which prepared in two different methods with two different cement thicknesses by CAD/CAM.
📊
Key Findings & Data:Teeth were divided into 4 groups according to preparation techniques; traditional preparation and incisal-overlap preparation, and cement thicknesses; 50 µm and 200 µm.
💡
Conclusion & Impact:Fracture strength increases as cement thickness reduced
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Aim: The aim of this investigation is to evaluate fracture resistance of veneer materials which prepared in two different methods with two different cement thicknesses by CAD/CAM. Material and Method: Forty maxillary incisors in similar sizes were used in this study. Each tooth restored with laminate after preparation. Teeth were divided into 4 groups according to preparation techniques; traditional preparation and incisal-overlap preparation, and cement thicknesses; 50 µm and 200 µm. Laminates were milled with Cerec CAD/CAM device (Sirona) from feldspathic ceramic blocks and applied using self etch resin cement. Fracture tests were performed applying load with constant speed using a universal testing machine (Instron 3344) to teeth embedded into cylindrical self-cure acrylic resin blocks with 125-degree angle. Fracture load values of laminates were recorded. Results were evaluated statistically with one-way ANOVA and Tukey post hoc tests using SPSS 20 software. Results: In terms of cement thickness, 50 µm showed statistically higher fracture strength values than 200 µm. In terms of preparation technique, traditional technique showed higher fracture strength than incisal-overlap technique. The highest mean fracture strength was recorded for traditional preparation with 50 µm (643 N), while the lowest was for incisal-overlap preparation with 200 µm (359.8 N). Conclusion: Traditional preparation technique increases fracture strength of laminate veneers. Fracture strength increases as cement thickness reduced

Özet

Amaç: Bu çalışmanın amacı; 2 farklı siman aralığında ve 2 farklı preparasyon tekniği ile CAD/CAM kullanılarak hazırlanan laminate veneerlerin kırılma direncini karşılaştırmaktadır. Gereç ve Yöntem: Çalışmada 40 adet benzer boyutlarda seçilen üst anterior diş kullanıldı. Her dişe laminate preparasyonu yapıldıktan sonra laminate veneer ile restore edildi. Dişler, preparasyon teknikleri; insizalde sonlanan geleneksel kesim ve insizali içine alan kesim ile siman aralıkları; 50 µm ve 200 µm olacak şekilde 4 gruba ayrıldı. Laminateler feldspatik seramik bloklar kullanılarak Cerec CAD/CAM cihazı yardımıyla hazırlanıp self etch rezin siman ile uygulandı. 125 derecelik açıyla kendinden sertleşen akril silindirik bloklara gömülen dişlere üniversal test cihazıyla (Instron 3344) sabit hızda kuvvet uygulanarak kırma testi gerçekleştirildi. Laminatelerin kırılma kuvvetleri kaydedildi. Elde edilen sonuçlar SPSS 20 istatistik yazılımı kullanılarak tek yönlü varyans analizi ve Tukey post hoc testi kullanılarak istatiksel olarak değerlendirildi. Bulgular: Siman aralığı karşılaştırıldığında 50 µm, 200 µm siman aralığına göre daha yüksek kırılma direnci gösterdi. Kesim teknikleri karşılaştırıldığında geleneksel kesim insizale overlap kesime göre daha yüksek kırılma direnci gösterdi. En yüksek ortalama kırılma direnci geleneksel kesim ve 50 µm siman aralığında (643 N), en düşük değer insizale overlap kesim ve 200 µm siman aralığında (359.8 N) kaydedildi. Sonuç: Geleneksek kesim tekniği laminate veneerlerin kırılma direncini arttırır. Siman aralığı azaldıkça kırılma direnci artar

🔖

Cite This Article

KARATAŞ, Ö., SAĞSÖZ, Ö., SEVEN, N., VURGEÇ, O. R., POLAT, Y. K. (2022). FRACTURE STRENGTH EVALUATION OF CAD/CAM LAMINATE VENEERS PREPARED WITH DIFFERENT METHODS AND DIFFERENT CEMENT THICKNESSES. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, Cilt: 27 - Sayı: 1, 12–18. https://ajindex.com/articles/452057

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Rosenblum MA, Schulman A. A review of allceramic restorations. The Journal of the American Dental Association, 1997, 128: 297-307
  2. Shenoy A, Shenoy N. Dental ceramics: An update. Journal of conservative dentistry, 2010, 13: 195
  3. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. Journal of dentistry, 2000, 28: 163-77
  4. Kelleher MG DS, Lewis N. Ethical marketing in 'aesthetic' ('esthetic') or 'cosmetic dentistry' part 2. Dent Update, 2012: 39: 390-2, 394-6, 398-400 passim. Baskı
  5. KARAALĠOĞLU AGDOF, DUYMUġ ZY. DiĢ hekimliğinde uygulanan CAD/CAM sistemleri. Atatürk Üniv DiĢ Hek Fak Derg 2008; 18
  6. Nakamura M, Matsumura H. The 24-year clinical performance of porcelain laminate veneer restorations bonded with a two-liquid silane primer and a tri-n-butylborane-initiated adhesive resin. Journal of oral science, 2014, 56: 227-30
  7. Rizkalla AS, Jones DW. Indentation fracture toughness and dynamic elastic moduli for commercial feldspathic dental porcelain materials. Dental Materials, 2004, 20: 198-206
  8. Friedman M. A 15-year review of porcelain veneer failure--a clinician's observations. Compendium of continuing education in dentistry (Jamesburg, NJ: 1995), 1998, 19: 625-8, 630, 2 passim; quiz 638
  9. BARGHI N, BERRY TG. Post‐bonding Crack Formation in Porcelain Veneers. Journal of Esthetic and Restorative Dentistry, 1997, 9: 51-4
  10. Edelhoff D, Sorensen JA. Tooth structure removal associated with various preparation designs for anterior teeth. The Journal of Prosthetic Dentistry, 2002, 87: 503-9
  11. Magne P, Kwon K-R, Belser UC, Hodges JS, Douglas WH. Crack propensity of porcelain laminate veneers: a simulated operatory evaluation. The Journal of Prosthetic Dentistry, 1999, 81: 327-34
  12. Stevenson B, Ibbetson R. The effect of the substructure on the colour of samples/restorations veneered with ceramic: a literature review. Journal of dentistry, 2010, 38: 361-8
  13. Stappert CF, Ozden U, Gerds T, Strub JR. Longevity and failure load of ceramic veneers with different preparation designs after exposure to masticatory simulation. The Journal of Prosthetic Dentistry, 2005, 94: 132-9
  14. Magne P, Douglas WH. Design optimization and evolution of bonded ceramics for the anterior dentition: a finite-element analysis. Quintessence international, 1999, 30
  15. Gürel G. Predictable, precise, and repeatable tooth preparation for porcelain laminate veneers. Practical procedures & aesthetic dentistry: PPAD