SavedAdd your journal

Journals / Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi / 2018 / Cilt: 28 - Sayı: 3

EVALUATION OF TRANSLUCENCY AND COLOR STABILITY OF ESTHETIC CAD/CAM RESTORATIVE MATERIALS

ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ

Ceyda GÜLEÇ
Işıl SARIKAYA
Pages
365–370
Publication Date
2022-10-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Data were analyzed with Mann-Whitney U test (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim: Adequately information is not available about the translucency and color stability of esthetic restorative CAD/CAM composite (LAVA Ultimate, 3M ESPE, StPaul, USA) and hybrid ceramic material (VITA Enamic, Vita Zahnfabrik, Germany).
📊
Key Findings & Data:Material and Methods: Four groups consist of 10 specimens, were prepared with 1 mm thickness of hybrid ceramic and resin nano ceramic composite resin monolithic blocks. 2M2 high translucent blocks were chosen for all tested materials.
💡
Conclusion & Impact:Data were analyzed with Mann-Whitney U test (p
🔬Design:Research Article
📍Scope:10 specimens
⚙️Variables:Domain Parameters

Abstract

Aim: Adequately information is not available about the translucency and color stability of esthetic restorative CAD/CAM composite (LAVA Ultimate, 3M ESPE, StPaul, USA) and hybrid ceramic material (VITA Enamic, Vita Zahnfabrik, Germany). The purpose of this study was to investigate the translucency and color stability of restorative CAD/CAM materials. Material and Methods: Four groups consist of 10 specimens, were prepared with 1 mm thickness of hybrid ceramic and resin nano ceramic composite resin monolithic blocks. 2M2 high translucent blocks were chosen for all tested materials. Surface finishing was performed with Sof-Lex (3M ESPE, StPaul, USA) discs for Lava Ultimate specimens and Vita Enamic polishing set (VITA Enamic, Vita Zahnfabrik, Germany) was used for Vita Enamic. The polishing procedures were performed on both sides of the specimens. Translucency parameter and color differences were measured in the CIE L*a*b* system by spectrophotometer (Vita Easy Shade, Vita Zahnfabrik, Germany) before and after 48 hours of immersion in a coffee solution. Data were analyzed with Mann-Whitney U test (p

Özet

Amaç: Estetik restoratif CAD/CAM kompoziti (Lava Ultimate;3M ESPE, St.Paul, ABD) ve hibrit seramik materyalinin(Vita Enamic, Vita Zahnfabrik, Almanya) translüsensive renk stabilitesi hakkında yeterli bilgi bulunmamaktadır.Bu çalışmanın amacı, restorative CAD/CAM materyallerinintranslüsensi ve renk stabilitesini araştırmaktır.Gereç ve Yöntem: Onar örnekten oluşan dört grup, 1mm kalınlığında hibrit seramik ve rezin nanoseramikkompozit rezin monolitik bloklardan hazırlandı. Test edilentüm materyaller için 2M2, yüksek translüsensili bloklarseçildi. Yüzey bitirmelerinde Lava Ultimate örnekler içinSof-Lex (3M ESPE, St.Paul, ABD) diskler, Vita Enamic içinVita Enamic polishing set (Vita Enamic, Vita Zahnfabrik,Almanya) kullanıldı. Örneklerin her iki yüzüne de polisajuygulandı. Translüsensi parametresi ve renk farklılıkları,örnekler 48 saat kahve solüsyonunda bekletilmeden önceve sonrasında CIE L*a*b* sisteminde spektrofotometre(Vita Easy Shade, Vita Zahnfabrik, Almanya) ile ölçüldü.Veriler Mann-Whitney U testi ile incelendi (p

🔖

Cite This Article

GÜLEÇ, C., SARIKAYA, I. (2022). EVALUATION OF TRANSLUCENCY AND COLOR STABILITY OF ESTHETIC CAD/CAM RESTORATIVE MATERIALS. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, Cilt: 28 - Sayı: 3, 365–370. https://ajindex.com/articles/452029

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Barutcigil Ç, Harorlı OT, Yıldız M, Özcan E, Arslan H, Bayındır F. The color differences of direct esthetic restorative materials after setting and compared with a shade guide. JADA 2011;142:658-65.
  2. Doğan A, Yüzügüllü B. Renk seçiminde güncel teknolojik gelişmeler [Recent technological developments in color selection]. Atatürk Üniv. Diş Hek. Fak. Derg. 2011;4:65-72.
  3. Shillingburg HT, Hobo S, Whitsett LD, Brackett SE. Fundamentals of Fixed Prosthodontics. 3rd ed. Londra; Quintessence Publishing Co Inc:2010. p. 433. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26.
  4. Seghi R, Johnston W, O'Brien W. Performance assessment of colorimetric devices on dental porcelains. J Dent Res 1989;68:1755-9.
  5. Heydecke G, Zhang F, Razzoog ME. In vitro color stability of double-layer veneers after accelerated aging. J Prosthet Dent 2001;85:551-7.
  6. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG et al. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013;110:397-401. Commission Internationale de l’Eclairage (CIE). CIE technical report: colorimetry. [CIE Pub No.15.3]. 2004. Joiner A. Tooth colour: A review of the literature. J Dent, 2004;32:3-12.
  7. Powers JM, Sakaguchi RL. Optical, thermal, and electrical properties, In: Craig’s Restorative Dental Materials, 12 Ed, Missouri; Mosby:2006. p.28-50.
  8. Güler AU, Güler E, Yücel AÇ, Ertaş E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108-12.
  9. Ragain JC, Johnston WM. Minimum color differences for discriminating mismatch between composite and tooth color. J Esthet Restor Dent 2001;13:41-8.
  10. Johnston W, Kao E. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22. O'Brien WJ. Dental materials and their selection. 3rd Ed. Chicago; Quintessence Publishing Co Inc: 2008. p. 24-36.
  11. Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent 1998;79:254-60.
  12. Ishikawa-Nagai S, Yoshida A, Sakai M, Kristiansen J, Da Silva JD. Clinical evaluation of perceptibility of color differences between natural teeth and allceramic crowns. J Dent 2009;37:57-63.
  13. Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: A review. Dent Mater 2011;27:97-108.
  14. Acar O, Yılmaz B, Altıntas SH, Chandrasekaran I, Johnston WM. Color