SavedAdd your journal

Journals / ARI The Bulletin of the Istanbul Technical University / 2003 / Cilt: 53 - Sayı: 1

Free vibration analysis of circular, annular and annular sectoral plates

Nihal ERATLI
Pages
29–43
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The accuracy of the SEC24 and SEC32 elements together is verified by applying the method to some problems taken from the literature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, free vibration analysis of circular, annular and annular sectoral thick plates is carried out by mixed finite element method based on the Gâteaux differential.
📊
Key Findings & Data:Two different sectoral elements are used with 3x8 degrees of freedom (SEC24) and 4x8 degrees of freedom (SEC32).
💡
Conclusion & Impact:The accuracy of the SEC24 and SEC32 elements together is verified by applying the method to some problems taken from the literature.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, free vibration analysis of circular, annular and annular sectoral thick plates is carried out by mixed finite element method based on the Gâteaux differential. In free vibration analysis, the problem reduces to the solution of a standard eigenvalue problem and the mixed element is based upon a consistent mass matrix formulation. Bending and tprsional moments, transverse shear forces, rotations and displacements are the basic unknowns of the functional. Two different sectoral elements are used with 3x8 degrees of freedom (SEC24) and 4x8 degrees of freedom (SEC32). The accuracy of the SEC24 and SEC32 elements together is verified by applying the method to some problems taken from the literature.

🔖

Cite This Article

ERATLI, N. (2022). Free vibration analysis of circular, annular and annular sectoral plates. ARI The Bulletin of the Istanbul Technical University, Cilt: 53 - Sayı: 1, 29–43. https://ajindex.com/articles/448174

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. [I] E. Reissner, J. Appl. Mech., ASME 12, 69 (1946). [2] E. Reissner, Int. J. Solids Structures 11, 569 (1975). [3] R. D. Mindlin, J. Appl. Mech., ASME 18, 31 (1951). [4] T. J. R. Hughes, R. L. Taylor, and W. Kanoknukkulchai, Int. J. Numer. Methods Eng. 11, 1529 (1977). [5] E. Hinton and N. Bicanic, Computers & Structures 10, 483 (1979). [6] O. C. Zienkiewicz, R. L Taylor, and J. Too, Int. J. Numerical Methods Eng. 3, 275 (1971) [7] J. L. Batoz and A. Lardeur, Int. J. Numer. Methods Eng. 28, 533 (1989). [8] T. Belytschko, C. S. Tsay, and W. K. Liu, Computer Methods in Applied Mechanics and Engineering 29, 313 (1981). [9] N. Erath and A. Y. Aköz, Computers & Structures 65, 515 (1997). [10] A. Y. Aköz and N. Erath, Structural Engineering and Mechanics 9, 519 (2000). [II] V. Pane, Theories of Elastic Plates, Noordhoff International Publishing (1975). [12] J. D. Oden and J. N.Reddy, Variational method in theoretical mechanics (Springer, 1976). [13] A. L. Goldenveizer, Theory of elastic thin shells (Pergomon Press, NewYork 1961). [14] A. Y. Aköz and A. Özütok, Int. J. Numerical Methods in Engineering 47, 1933 (2000). [15] A. W. Leissa and Y. Narita, J. Sound and Vibration 70, 221 (1980). [16] A. W. Leissa, Vibration of plates, NASA SP 160, Washington, D.C.: U.S. Government Printing Office (1969). [17] T. Irie, G. Yamada, and K. Takagi, J. Applied Mechanics, ASME 49, 633 (1982). [18] C. Liu and G. Chen, Int. J. Mech. Sci. 37, 861 (1995). [19] Y. Xiang, K. M. Liew, and S. Kitipornchai,J. Engineering Mechanics, ASCE 119, 1579 (1993). [20] I. E. Harik and H. R. Molaghasemi, J. of Engineering Mechanics, ASCE 115, 2709 (1989). [21] T. Mizusawa, J. Sound and Vibration 149, 461 (1991). [22] T. Mizusawa, J. Sound and Vibration 150, 245 (1991).