SavedAdd your journal

Journals / An International Journal of Optimization and Control: Theories & Applications (IJOCTA) / 2017 / Cilt: 7 - Sayı: 2

Determination of optimum insulation thicknesses using economical analyse for exterior walls of buildings with different masses

Okan KON
Pages
149–157
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Minimum optimum insulation thickness was calculated in case XPS was preferred as insulation material, and the maximum one was calculated in case of using glass wool.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, five different cities were selected from the five climatic zones according to Turkish standard TS 825, and insulation thicknesses of exterior walls of sample buildings were calculated by using optimization.
📊
Key Findings & Data:Vertical perforated bricks with density of 550 kg/m3 and 1000 kg/m3werechosen within the study content.
💡
Conclusion & Impact:Minimum optimum insulation thickness was calculated in case XPS was preferred as insulation material, and the maximum one was calculated in case of using glass wool.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, five different cities were selected from the five climatic zones according to Turkish standard TS 825, and insulation thicknesses of exterior walls of sample buildings were calculated by using optimization. Vertical perforated bricks with density of 550 kg/m3 and 1000 kg/m3werechosen within the study content. Glass wool, expanded polystyrene (XPS), extruded polystyrene (EPS) were considered as insulation materials. Additionally, natural gas, coal, fuel oil and LPG were utilized as fuel for heating process while electricity was used for cooling. Life cycle cost (LCC) analysis and degree-day method were the approaches for optimum insulation thickness calculations. As a result, in case of usage vertical perforated bricks with density of 550 kg/m3 and 1000 kg/m3 resulted different values in between 0.005-0.007 m (5-7 mm) in the optimum insulation thickness calculations under different insulation materials. Minimum optimum insulation thickness was calculated in case XPS was preferred as insulation material, and the maximum one was calculated in case of using glass wool.

🔖

Cite This Article

KON, O. (2022). Determination of optimum insulation thicknesses using economical analyse for exterior walls of buildings with different masses. An International Journal of Optimization and Control: Theories & Applications (IJOCTA), Cilt: 7 - Sayı: 2, 149–157. https://ajindex.com/articles/440663

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Kaynaklı, Ö., Kılıç, M., Yamankaradeniz, R.,Isıtma ve soğutma süreci için dış duvar optimum yalıtım kalınlığı hesabı, TTMD Isıtma, Soğutma, Havalandırma, Klima, Yangın ve Sıhhi Tesisat Dergisi, 65, 39-45 (2010)
  2. Şişman N., Determination of optimum insulation thickness of building exterial walls in different degree day regions by using economical analyse method when different insulation and wall structure materials are used, Osmangazi University, Master Thesis (2005)
  3. Kurekçi N. A., Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey’s provincial centers, Energy and Buildings, 118, 197-213(2016). [4]Kaynakli, Ö. A., study on residental heating energy requirement and optimum insulation thickness. Renewable Energy, 33,6,1164-1172 (2008)
  4. Yuan J., Farnham C., Emura K., Alam M. A.,Proposal for optimum combination of reflectivity and insulation thickness of building exterior walls for annual thermal load in Japan, Building and Environment, 103, 228-237 (2016)
  5. Barrau J., Ibanez M., Badia F.,Impact of the optimization criteria on the determination of the insulation thickness. Energy and Buildings, 76 459– 469 (2014)
  6. Kaynaklı, Ö., Mutlu, M., Kılıç, M., Bina duvarlarına uygulanan ısıl yalıtım kalınlığının enerji maliyeti odaklı optimizasyonu, Tesisat Mühendisliği, 126, 48-54(2011)
  7. Dombaycı, Ö. A., Gölcü, M., Pancar, Y., Optimization of insulation for external walls using different energy-sources, Applied Energy, 83, 9, 921-928 (2006)
  8. Bolattürk, A., Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey. Building and Environment, 43,6,1055-1064 (2008)
  9. Uçar, A. and Balo, F., Effect of fuel type on the optimum thickness of selected insulation materials for the four different climatic of Turkey. Applied Energy, 86,5,730-736 (2009)
  10. Yu, J, Yang, C., Tian, L. and Liao, D., A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China. Applied Energy, 86,11,2520-2529 (2009)
  11. Uçar, A. and Balo, F., Determination of the energy savings and the optimum insulation thickness in the four different insulated exterior walls. Renewable Energy, 35,1,88-94 (2010)
  12. Kaynakli O., A review of the economical and optimum thermal insulation thickness for building applications, Renewable and Sustainable Energy Reviews, 16, 415–425 (2012)
  13. Vincel