SavedAdd your journal

Journals / An International Journal of Optimization and Control: Theories & Applications (IJOCTA) / 2019 / Cilt: 9 - Sayı: 3

Analysis of boride layer thickness of borided AISI 430 by response surface methodology

Turker TURKOGLU
Irfan AY
Pages
39–44
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, the Response SurfaceMethodology and Face Centered Central Composite Design have beeneffectively applied to the boriding process.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The boriding process is a thermochemical surface treatment which can be appliedto many iron and non-ferrous materials and improves the properties of thematerial such as hardness, wear resistance.
📊
Key Findings & Data:In the present study, the layerthickness values of the boronized AISI 430 material were optimized using theResponse Surface Methodology.
💡
Conclusion & Impact:Finally, the Response SurfaceMethodology and Face Centered Central Composite Design have beeneffectively applied to the boriding process.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The boriding process is a thermochemical surface treatment which can be appliedto many iron and non-ferrous materials and improves the properties of thematerial such as hardness, wear resistance. In the present study, the layerthickness values of the boronized AISI 430 material were optimized using theResponse Surface Methodology. Mathematical model was constructed usingparameters such as temperature and time and the results were analyzedcomparatively. As a result of the analysis, the optimum layer thickness value forAISI 430 material was obtained as 39.0183 µm for 1000 ºC and 5.9h and it wasdetermined that the boriding temperature and time are effective on the boridelayer formation process of AISI 430 material. Finally, the Response SurfaceMethodology and Face Centered Central Composite Design have beeneffectively applied to the boriding process.

🔖

Cite This Article

TURKOGLU, T., AY, I. (2022). Analysis of boride layer thickness of borided AISI 430 by response surface methodology. An International Journal of Optimization and Control: Theories & Applications (IJOCTA), Cilt: 9 - Sayı: 3, 39–44. https://ajindex.com/articles/440597

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Campos, I., Ramirez, G., Figueroa, U., Martinez, J., & Morales, O. (2007). Evaluation of boron mobility on the phases FeB, Fe2B, and diffusion zone in AISI 1045 and M2 steels. Applied Surface Science, 253, 3469-3475
  2. Lee, S.Y., Kim, G.S., & Kim, B.S. (2004). Mechanical properties of duplex layer formed on AISI 403 stainless steel by chromizing and boronizing treatment. Surface & Coatings Technology, 177, 178-184
  3. Krelling, A.P., da Costa, C.E., Milan, J.C.G., & Almeida, E.A.S. (2017). Micro-abrasive wear mechanisms of borided AISI 1020 steel. Tribology International, 111, 234-242
  4. ASM Handbook. (1995). Heat Treating. ASM International Handbook Committee, Ohio.[5] Angkurarach, L., & Juijerm, P. (2012). Effects of direct current field on powder-packet boriding process on martensitic stainless steel AISI 420. Archives of Metallurgy and Materials, 57(3), 799- 804
  5. Balusamy, T., Narayanan, T.S.N.S., Ravichandran K., Song Park, Il., & Lee, M.H. (2013). Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel. Surface & Coating Technology, 232, 60-67
  6. Carrera-Espinoza, R., Figueroa-Lopez, U., Martinez-Trinidad, J., Campos-Silva, I., Hernandez-Sanchez, E., & Motallebzadeh, A. (2016). Tribological behavior of borided AISI 1018 steel under linear reciprocating sliding conditions. Wear, 362-363, 1-7
  7. Gunen, A. (2017). Characterization of borided Inconel 625 alloy with different boron chemicals. Pamukkale University Journal of Engineering Sciences, 23(4), 411-416
  8. Turkoglu, T. (2017). Investigation of properties hardness, corrosion resistance and microstructure on the boronized AISI 304, AISI 420 and AISI 430 stainless steels. MSc Thesis. Balikesir University
  9. Genel, K., Ozbek, I., Kurt, A., & Bindal, C. (2002), Boriding response of AISI W1 steel and use of artificial neural network for prediction of borided layer properties. Surface & Coatings Technology, 160, 38-43
  10. Arguellas – Ojeda, J.L., Marquez – Herrera, A., Robles, A.S., & Angel, C.R.M. (2017). Hardness optimization of boride diffusion layer on ASTM F75 alloy using response surface methodology. Revista Mexicana de Fisica, 63, 76-81
  11. Chen J., Yang A., & Hao, S. (2011). Optimization of Cr12MoV steel boronizing technology. Advanced Materials Research, 216, 687-691
  12. Kayali, Y., Gokce, B., & Colak, F. (2013). Analysis of wear behavior of borided AISI 52100 steel with the Taguchi method. Journal of the Balkan Tribologic