Journals / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2000 / Cilt: 1 - Sayı: 1

Yiterbiyum içeren çok katyonlu $alpha$-sialon seramiklerinin yüksek sıcaklık kararlılığı

High temperature thermal stability of multi-cation doped $alpha$-sialon ceramics containing ytterbium

Pages
67–72
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Clearly the $alphaleftrightarrowbeta$ transformation temperature for ytterbium $alpha$-sialons is below 1450°C, the conventional heat-treatment temperature used for most of the current research on rare earth densified $alpha$-sialons.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Recently, it has been found that the phase composition and microstructure of a $alpha-beta$ sialon ceramics is greatly affected by heat treatment procedures when rare earth oxides are used as sintering additives.
📊
Key Findings & Data:The $alpha$-sialon phase is only stable at high ($geq$ 1650°C) temperatures and transforms to rare earth rich intergranular phases plus $beta$-sialon at lower temperatures.
💡
Conclusion & Impact:Clearly the $alphaleftrightarrowbeta$ transformation temperature for ytterbium $alpha$-sialons is below 1450°C, the conventional heat-treatment temperature used for most of the current research on rare earth densified $alpha$-sialons.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Recently, it has been found that the phase composition and microstructure of a $alpha-beta$ sialon ceramics is greatly affected by heat treatment procedures when rare earth oxides are used as sintering additives. The $alpha$-sialon phase is only stable at high ($geq$ 1650°C) temperatures and transforms to rare earth rich intergranular phases plus $beta$-sialon at lower temperatures. The present paper describes similar studies carried out on multi-cation doped $alpha$-sialon ceramics where ytterbium as the sole sintering additive and present with other (Sr-, La-, Ce-, Nd-) cations, the resulting $alpha$-sialon products are fully resistant towards $alphaleftrightarrowbeta$ transformation when heat treated at 1450°C. Clearly the $alphaleftrightarrowbeta$ transformation temperature for ytterbium $alpha$-sialons is below 1450°C, the conventional heat-treatment temperature used for most of the current research on rare earth densified $alpha$-sialons.

Özet

Nadir element oksit katkılı $alpha$-sialon seramiklerinde oluşan faz komposizyonlarının ve mikroyapılarının sinterleme sonrası yapılan ısıl işlemlerden önemli ölçüde etkilendiği yakın zamanda yapılan çalışmalarda bulunmuştur. Bu çalışmalarda $alpha$-sialon fazının sadece 1650°C'nin üzerindeki sıcaklıklarda kararlı olduğu, daha düşük sıcaklıklarda ise $beta$-sialon ve nadir element içeren tane sınırları fazlarına dönüştüğü gözlemlenmiştir. Bu çalışmada yiterbiyum temel katyon olmak üzere çok katyon içeren (Sr-, La-, Ce-, Nd-) $alpha$-sialon seramikleri üzerine sinterleme sonrası yapılan ısıl işlem sonuçları tartışılmıştır. 1450°C'de yapılan ısıl işlem sonuçlan Yb- katyonlarını içeren $alpha$-sialon seramiklerinin $alphaleftrightarrowbeta$ sialon dönüşümüne uğramadığını ve bu katyonları içeren sistemlerde $alphaleftrightarrowbeta$ sialon dönüşüm sıcaklığının 1450°C'nin çok altında olabileceğini göstermiştir.

🔖

Cite This Article

Mandal, H., HOFMANN, M. J., THOMPSON, D. P., JACK, K. H. (2022). Yiterbiyum içeren çok katyonlu $alpha$-sialon seramiklerinin yüksek sıcaklık kararlılığı. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 1 - Sayı: 1, 67–72. https://ajindex.com/articles/438539

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Faik L.K.L., Shen Z., and Ekstrom T. (1997). Microstructural Stability of Duplex $alpha$ $leftrightarrow$ $beta$ Sialon Ceramics. Journal of the European Ceramic Society, 17, 1099-1112.
  2. Mandal, H., Thompson, DP. and Ekström, E. (1993). Reversible $alpha$ $leftrightarrow$ $beta$ Sialon Transformation in Heat-Treated Sialon Ceramics. Journal of the European Ceramic Society. 13.421 -429 Mandal, H and Thompson DP. (1995). Mechanism for $alpha$ $leftrightarrow$ $beta$ sialon transformation. In Fourth Euro Ceramics, Vol. 2, Ed: C.Galassi, pp. 327-334,
  3. Gruppo Ed. Faenza Editrice, Italy. Mandal, H„ Camuscu, N. and Thompson, DP. (1997).
  4. Effect of Starting Composition, Type of Rare Earth Sintering additive and Amount of Liquid Phase on $alpha$ $leftrightarrow$ $beta$ Sialon Transformation. Journal of the European Ceramic Society, 17, 599-613.
  5. Mandal, H. and Thompson, D.P.(1997). The driving force for $alpha$ $leftrightarrow$ $beta$ transformation in rare earth $alpha$-sialon ceramics. In Fifth Euro Ceramics, Vol. 2, Ed: P.Abelard et al, Key Engineering Materials, Vol. 132-136, pp. 798-801,
  6. Zurich, Switzerland. Mandal, H. and Hoffmann M J. (1999). Preparation of Multi-cation $alpha$-SiA10N Ceramics containing Lanthanum, Journal of the American Ceramic Society, 82, 229-232.
  7. Mandal, H., Thompson D.P. and Jack, K.H. (1999). $alpha$ $leftrightarrow$ $beta$ phase transformations in silicon nitride and sialons. Key Engineering Materials, 159-160, 1-10.
  8. Shen, Z., Ekström,T. and Nygren M. (1996). Reactions Occuring in Post Heat-Treated $alpha$ $leftrightarrow$ $beta$ Sialons: On the Thermal stability. Journal of the European Ceramic Society, 16, 873-883.
  9. Zhao R., Cheng Y.B. and Drennan J. (1996). Microstructural Features of the $alpha$ to $beta$-SiAlON Phase Transformation. Journal of the European Ceramic Society, 12,529-534.