Journals / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2015 / Cilt: 16 - Sayı: 2

THE ADSORPTION OF BASIC RED 46 ON THE NATURAL MINERAL LIMESTONE WITH MONTMORILLONITE

Pages
303–315
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Langmuir, Freundlich, Temkin,Dubinin-Radushkevich isotherm models were applied to equilibrium data and it was concluded that theequilibrium data fitted better to Langmuir isotherm model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this study is to investigate the applicability of the natural mineral limestone withmontmorillonite as an adsorbent, and the removal of Basic Red 46 (BR 46) which is used textile industryand given to receiving waters with wastewaters.
📊
Key Findings & Data:The optimum environmental conditions in theadsorption of BR 46 on MKT were determined as initial pH 8.0, temperature 25 o C and adsorbentconcentration 1.0 g/L; it was observed that the adsorbed amounts increased linearly with concentration(q d =0.8*Co ; R2 =0.9965) in the studied initial concentration range.
💡
Conclusion & Impact:Langmuir, Freundlich, Temkin,Dubinin-Radushkevich isotherm models were applied to equilibrium data and it was concluded that theequilibrium data fitted better to Langmuir isotherm model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The purpose of this study is to investigate the applicability of the natural mineral limestone withmontmorillonite as an adsorbent, and the removal of Basic Red 46 (BR 46) which is used textile industryand given to receiving waters with wastewaters. The optimum environmental conditions in theadsorption of BR 46 on MKT were determined as initial pH 8.0, temperature 25 o C and adsorbentconcentration 1.0 g/L; it was observed that the adsorbed amounts increased linearly with concentration(q d =0.8*Co ; R2 =0.9965) in the studied initial concentration range. Langmuir, Freundlich, Temkin,Dubinin-Radushkevich isotherm models were applied to equilibrium data and it was concluded that theequilibrium data fitted better to Langmuir isotherm model. The maximum BR 46 adsorption capacity ofMKT was determined as 169.5 mg/g. Experimental kinetic data fitted to the pseudo second orderreaction kinetic, it was concluded that the intraparticle and external diffusion was effective in the studiedadsorption process. According to the thermodynamic parameters, such as free Gibbs energy, enthalpy, entropy changes,it was determined that the adsorption of BR 46 on MKT was exothermic and spontaneous in nature. Thecharacterization studies of MKT before and after adsorption were carried out with FTIR, SEM and XRDanalyses.

🔖

Cite This Article

UZUNOĞLU, D., ÖZER, A., ÖZDEMİR, Z. (2022). THE ADSORPTION OF BASIC RED 46 ON THE NATURAL MINERAL LIMESTONE WITH MONTMORILLONITE. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 16 - Sayı: 2, 303–315. https://ajindex.com/articles/438362

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Albadarin, A.B., Mangwandi, C., Al-Muhtaseb, A.A.H., Walker, G.M., Allen, S.J., and Ahmad, M.N. (2012). Kinetic and thermodynamics of chromium ions adsorption onto low-cost dolomite adsorbent, Chemical Engineering Journal 179, 193-202.
  2. Auta, M., and Hameed, B.H. (2013). Acid modified local clay beads as effective low-cost adsorbent for dynamic adsorption of methylene blue, Journal of Industrial and Engineering Chemistry 19.4, 1153-1161.
  3. Barreca, S., Orecchio, S., and Pace, A. (2014). The effect of montmorillonite clay in alginate gel beads for polychlorinated biphenyl adsorption: Isothermal and kinetic studies, Applied Clay Science 99, 220-228.
  4. Bulut, E., Özacar, M., and Şengil, İ.A. (2008). Equilibrium and kinetic data and process design for adsorption of Congo Red onto bentonite, Journal of Hazardous Materials 154.1, 613-622.
  5. Eloussaief, M., Jarraya, I., and Benzina, M. (2009). Adsorption of copper ions on two clays from Tunisia: pH and temperature effects, Applied Clay Science 46.4, 409-413.
  6. Errais, E., Duplay, J., Darragi, F., M'Rabet, I., Aubert, A., Huber, F., and Morvan, G. (2011). Efficient anionic dye adsorption on natural untreated clay: Kinetic study and thermodynamic parameters, Desalination 275.1, 74-81.
  7. Gücek, A., Şener, S., Bilgen, S., and Mazmancı, M.A. (2005). Adsorption and kinetic studies of cationic and anionic dyes on pyrophyllite from aqueous solutions, Journal of Colloid and Interface Science 286.1, 53-60.
  8. Gürses, A., Doğar, Ç., Yalçın, M., Açıkyıldız, M., Bayrak, R., and Karaca, S. (2006). The adsorption kinetics of the cationic dye, methylene blue, onto clay, Journal of Hazardous Materials 131.1, 217-228.
  9. Hameed, B.H. (2007). Equilibrium and kinetics studies of 2, 4, 6-trichlorophenol adsorption onto activated clay, Colloids and Surfaces A: Physicochemical and Engineering Aspects 307.1, 45-52.
  10. Han, R., Zhang, J., Han, P., Wang, Y., Zhao, Z., and Tang, M. (2009). Study of equilibrium, kinetic and thermodynamic parameters about methylene blue adsorption onto natural zeolite, Chemical Engineering Journal 145.3, 496-504.
  11. Karim, A.B., Mounir, B., Hachkar, M., Bakasse, M., and Yaacoubi, A. (2009). Removal of Basic Red 46 dye from aqueous solution by adsorption onto Moroccan clay, Journal of Hazardous Materials 168.1, 304-309.
  12. Kluczka, J., Korolewicz, T., Zołotajkin, M., Simka, W., and Raczek, M. (2013). A New Adsorbent for Boron Removal from Aqueous Solutions, Environmental Technology 34, 1369-1376.
  13. Koyuncu, H., Yıldız, N., Salgın, U., K