SavedAdd your journal

Journals / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2017 / Cilt: 18 - Sayı: 2

EFFECT OF COOLING RATE ON THE SHAPE MEMORY BEHAVIOR OF Ti-54at.%Ni ALLOYS

İrfan KAYA
Pages
535–542
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that it is possible to tailor the transformation temperatures of Ti54at.%Ni alloys with cooling rate where multiple step transformation can also be observed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The effects of cooling rate after aging at 550 °C for 3 h on the shape memory behavior and mechanical properties of Ti54at.%Ni alloys are investigated in compression.
📊
Key Findings & Data:It was found that it is possible to tailor the transformation temperatures of Ti54at.%Ni alloys with cooling rate where multiple step transformation can also be observed.
💡
Conclusion & Impact:It is also found that shape memory effect is highly stress dependent
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The effects of cooling rate after aging at 550 °C for 3 h on the shape memory behavior and mechanical properties of Ti54at.%Ni alloys are investigated in compression. It was found that it is possible to tailor the transformation temperatures of Ti54at.%Ni alloys with cooling rate where multiple step transformation can also be observed. Shape memory behavior with transformation strain of 1 % is observed under ultra high stress level of 1500 MPa. It is also found that shape memory effect is highly stress dependent

🔖

Cite This Article

KAYA, İ. (2022). EFFECT OF COOLING RATE ON THE SHAPE MEMORY BEHAVIOR OF Ti-54at.%Ni ALLOYS. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 18 - Sayı: 2, 535–542. https://ajindex.com/articles/438305

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Shabalovskaya SA. Surface, corrosion and biocompatibility aspects of Nitinol as an implant material. Bio-Medical Materials and Engineering, 2002; 12(1): p. 69-109
  2. Otsuka K, Ren X. Physical metallurgy of Ti–Ni-based shape memory alloys. Progress in materials science, 2005; 50(5): p. 511-678
  3. Otsuka K, Wayman C. Mechanism of shape memory effect and superelasticity. Shape memory materials, 1998; p. 27-49
  4. Kurumada M, et al., TEM study of early Ni 4 Ti 3 precipitation and R-phase in Ni-rich NiTi nanoparticles. Scripta materialia, 2004; 50(11): p. 1413-1416
  5. Hornbogen E. Shape Memory Alloys, in Advanced Structural and Functional Materials: Proceedings of an International Seminar Organized by Deutsche Forschungsanstalt für Luft- und Raumfahrt (DLR), Köln, June 1991, W.G.J. Bunk, Editor, 1991, Springer Berlin Heidelberg: Berlin, Heidelberg. p. 133- 163
  6. Prokofiev E. et al. Phase transformations and functional properties of NiTi alloy with ultrafinegrained structure. in Materials Science Forum. 2011; Trans Tech Publ
  7. Otsuka K, Sawamura T, Shimizu K. Crystal structure and internal defects of equiatomic TiNi martensite. Physica status solidi (a), 1971; 5(2): p. 457-470
  8. Knowles K, Smith D. The crystallography of the martensitic transformation in equiatomic nickeltitanium. Acta Metallurgica, 1981; 29(1): p. 101-110
  9. Carroll M, Somsen C, Eggeler G. Multiple-step martensitic transformations in Ni-rich NiTi shape memory alloys. Scripta Materialia, 2004; 50(2): p. 187-192. [10] Šittner P, Lukáš P, Novák V, Daymond MR, Swallowe GM. In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress. Materials Science and Engineering: A, 2004; 378(1–2): p. 97-104
  10. Mahesh K, Fernandes FB, Silva RJ. Ageing effects on phase transformations in NiTi alloys. in European Symposium on Martensitic Transformations, 2009. EDP Sciences
  11. Motemani Y, Nili-Amadabadi M, Tan MJ, Bornapour M, Rayagah Sh. Effect of cooling rate on the phase transformation behavior and mechanical properties of Ni-rich NiTi shape memory alloy. Journal of Alloys and Compounds, 2009; 469(1–2): p. 164-168
  12. Nishida M, Wayman C, Honma T. Precipitation processes in near-equiatomic TiNi shape memory alloys. Metallurgical and Materials Transactions A, 1986; 17(9): p. 1505-1515
  13. Kainuma R, Matsumoto M, Honma T. Metallographic Study of Precipitation Processes in NickelRich TiNi Alloys. Bull. Res. Inst. Miner