SavedAdd your journal

Journals / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2018 / Cilt: 19 - Sayı: 1

OPTIMIZATION OF AN INTEGRAL FLAT PLATE COLLECTOR-STORAGE SYSTEM FOR DOMESTIC SOLAR WATER HEATING IN ADANA

İbrahim Halil YILMAZ
Pages
165–176
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that the optimum tilt angle for a due south-facing solar collector is found to be 35.0° formaximizing the annual solar fraction.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, the optimum orientation and sizing of a thermosyphon flat plate collector−storage solar water heating systemwere determined using the typical meteorological year data for Adana, Turkey.
📊
Key Findings & Data:A transient modeling was carried out for the prediction of a full year system performance through the use of theSystem Advisor Model simulation program.
💡
Conclusion & Impact:Results showed that the optimum tilt angle for a due south-facing solar collector is found to be 35.0° formaximizing the annual solar fraction.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this paper, the optimum orientation and sizing of a thermosyphon flat plate collector−storage solar water heating systemwere determined using the typical meteorological year data for Adana, Turkey. The typical meteorological year data for thelocation was taken from Meteonorm software, and the daily hot water consumption was estimated by utilizing the Rand hotwater profile. A transient modeling was carried out for the prediction of a full year system performance through the use of theSystem Advisor Model simulation program. The effects of the collector area, the storage tank volume, the daily averagedelivery temperature and the daily hot water consumption on the annual solar fraction were analyzed by the presentedsimulation model. Results showed that the optimum tilt angle for a due south-facing solar collector is found to be 35.0° formaximizing the annual solar fraction. The collector area and storage tank size greater than 3 m² and 100 L respectively havelittle effect on the solar utilization.

🔖

Cite This Article

YILMAZ, İ. H. (2022). OPTIMIZATION OF AN INTEGRAL FLAT PLATE COLLECTOR-STORAGE SYSTEM FOR DOMESTIC SOLAR WATER HEATING IN ADANA. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 19 - Sayı: 1, 165–176. https://ajindex.com/articles/438249

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Measurement of domestic hot water consumption in dwellings. Energy Saving Trust, England, 2008.
  2. Nijegorodov N, Devan K, Jain P, Carlsson S. Atmospheric transmittance models and an analytical method to predict the optimum slope of an absorber plate, variously oriented at any latitude. Renew Energ 1994; 4: 529-543.
  3. DiOrio N, Christensen C, Burch J, Dobos A. Technical manual for the SAM solar water heating model. National Renewable Energy Laboratory (NREL), 2014.
  4. Gutierrez G, Hincapie F, Duffie J, Beckman W. Simulation of forced circulation water heaters; effects of auxiliary energy supply, load type and storage capacity. Sol Energy 1974; 15: 287-298.
  5. Duffie JA, Beckman WA. Solar Engineering of Thermal Processes. 4th ed. John Wiley & Sons, 2013.
  6. Fanney A, Klein S. Performance of solar domestic hot water systems at the national bureau of standards-measurements and predictions. J Sol Energ-T ASME. 1983; 105: 311-321.
  7. Shariah A, Löf G. The optimization of tank-volume-to-collector-area ratio for a thermosyphon solar water heater. Renew Energ 1996; 7: 289-300. System Advisor Model (SAM),. [accessed 21.08.2017]. Meteonorm,. [accessed 21.08.2017].
  8. SRCC Certification, Rating & Listing Directory, Hasan A. Thermosyphon solar water heaters: effect of storage tank volume and configuration on efficiency. Energ Convers Manage 1997; 38: 847-854.
  9. Çomaklı K, Çakır U, Kaya M, Bakirci K. The relation of collector and storage tank size in solar heating systems. Energ Convers Manage 2012; 63: 112-117. TRaNsient SYstems Simulation Program,. [accessed 21.08.2017]. Akinoǧlu B, Shariah A, Ecevit A. Solar domestic water heating in Turkey. Energy 1999; 24: 363-374. ArcGIS,. [accessed 21.08.2017].
  10. Ertekin C, Kulcu R, Evrendilek F. Techno-economic analysis of solar water heating systems in Turkey. Sensors 2008; 8: 1252-1277. Bakirci K. General models for optimum tilt angles of solar panels: Turkey case study. Renew Sust Energ Rev 2012; 16: 6149-6159.
  11. Gunerhan H, Hepbasli A. Determination of the optimum tilt angle of solar collectors for building applications. Build Environ 2007; 42: 779-783. Ulgen K. Optimum tilt angle for solar collectors. Energ Source Part A 2006; 28: 1171-1180.
  12. Mauthner F, Weiss W, Spörk-Dür M. Solar Heat Worldwide: Markets and Contribution to the Energy Supply 2014. International Energy Agency-Solar Heating and Cooling Program, 2016. The Solar Hot Water Heater – A Brief Trip Through Time,. [accessed 21.08.2017].