Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2006 / Cilt: 12 - Sayı: 1

POSITION CONTROL OF BRUSHLESS DC MOTOR BASED ON DIGITAL SIGNAL PROCESSING

FIRÇASIZ DOĞRU AKIM MOTORUN SAYISAL İŞARET İŞLEMCİ TABANLI KONUM DENETİMİ

Pages
37–41
Publication Date
2006-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been seen that the controller which is proposed from simulation and experimental studies, has a quick dynamic responce with nonoscillation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Brushless DC Motors (BLDC) have been used widely high performance control systems which are depended on to development of power electronic and control technology.
📊
Key Findings & Data:In these motors to fed commutated supply, the control of position without oscilation has been required.
💡
Conclusion & Impact:It has been seen that the controller which is proposed from simulation and experimental studies, has a quick dynamic responce with nonoscillation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fırçasız doğru akım motoru · PD denetleyici · Sayısal İşaret İşlemci

Abstract

Brushless DC Motors (BLDC) have been used widely high performance control systems which are depended on to development of power electronic and control technology. In these motors to fed commutated supply, the control of position without oscilation has been required. In this study, position control of BLDC with digital signal processing has been implemented by a proportional-derivative (PD) controller because of its simple structure. It has been seen that the controller which is proposed from simulation and experimental studies, has a quick dynamic responce with nonoscillation.

Özet

Fırçasız Doğru Akım Motorları (FSDAM) güç elektroniği ve kontrol teknolojisindeki gelişmelere bağlı olarak yüksek performanslı kontrol sistemlerinde yaygın olarak kullanılmaktadır. Anahtarlamalı kaynakdan beslenen bu motorlarda, salınım olmadan konum denetiminin yapılması arzu edilen bir durumdur. Bu çalışmada, yapısının basit olması nedeniyle bir oransal-türev (PD) denetleyici tasarlanarak, FSDAM'ın sayısal işaret işlemci tabanlı konum denetimi gerçekleştirilmiştir. Benzetim ve deney çalışmalarından tasarlanan denetleyicinin, salınımsız hızlı bir dinamik cevaba sahip olduğu görülmüştür.

🔖

Cite This Article

GENÇER, Ç., COŞKUN, İ. (2006). POSITION CONTROL OF BRUSHLESS DC MOTOR BASED ON DIGITAL SIGNAL PROCESSING. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 12 - Sayı: 1, 37–41. https://ajindex.com/articles/43054

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...