Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2016 / Cilt: 22 - Sayı: 4

Performance analysis of pin fins with temperature dependent thermal parameters using the variation of parameters method

Isıl parametreleri sıcaklıkla değişen iğne kanatların, parametrelerin değişimi yöntemi ile performans analizi

Pages
246–252
Publication Date
2016-08-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The effects of problem parameters were investigated on the heat transfer rate and fin efficiency and results were presented graphically.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The performance of pin fins transferring heat by convection and radiation and having variable thermal conductivity, variable emissivity and variable heat transfer coefficient was investigated in the present paper.
📊
Key Findings & Data:Nondimensionalizing the fin equation, the problem parameters which affect the fin performance were obtained.
💡
Conclusion & Impact:The effects of problem parameters were investigated on the heat transfer rate and fin efficiency and results were presented graphically.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:İğne kanatlar · Değişken ısı iletim katsayısı · Değişken ısı taşınım katsayısı

Abstract

The performance of pin fins transferring heat by convection and radiation and having variable thermal conductivity, variable emissivity and variable heat transfer coefficient was investigated in the present paper. Nondimensionalizing the fin equation, the problem parameters which affect the fin performance were obtained. Dimensionless nonlinear fin equation was solved with the variation of parameters method, which is quite new in the solution of nonlinear heat transfer problems. The solution of variation of parameters method was compared with known analytical solutions and some numerical solution. The comparisons showed that the solutions are seen to be perfectly compatible. The effects of problem parameters were investigated on the heat transfer rate and fin efficiency and results were presented graphically.

Özet

Bu çalışmada, taşınım ve ışınımla ısı kaybeden ve ısı iletim katsayısı, ısı taşınım katsayısı ve yayma oranı sıcaklıkla değişen iğne kanatların ısıl performansları araştırılmıştır. Kanat denklemi boyutsuzlaştırılarak, kanat performansını etkileyen boyutsuz problem parametreleri elde edilmiştir. Doğrusal olmayan boyutsuz kanat denklemi, daha çok homojen olmayan doğrusal diferansiyel denklemlerin çözümünde kullanılan ve doğrusal olmayan denklemlerin çözümü için de kullanılabileceği yakın zamanlarda kanıtlanan parametrelerin değişimi yöntemi ile çözülmüştür. Parametrelerin değişimi yöntemi çözümü, bilinen analitik çözümlerle ve bazı sayısal çözümlerle karşılaştırılmış ve sonuçların mükemmel bir uyum içinde olduğu görülmüştür. Isı transfer hızı ve kanat verimine boyutsuz problem parametrelerinin etkileri araştırılmış ve sonuçlar grafiksel olarak sunulmuştur.

🔖

Cite This Article

ARSLANTÜRK, C. (2016). Performance analysis of pin fins with temperature dependent thermal parameters using the variation of parameters method. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 22 - Sayı: 4, 246–252. https://ajindex.com/articles/42608

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Kraus AD, Aziz A, Welty J. Extended Surface Heat Transfer. New York, USA, John Wiley & Sons Inc., 2001.
  2. Laor K, Kalman H. “Performance and optimum dimensions of different cooling fins with a temperature-dependent heat transfer coefficient”. International Journal Heat and Mass Transfer, 39(9), 1993-2003, 1996.
  3. Aksoy IG. “Thermal analysis of annular fins with temperature-dependent thermal properties”. Applied Mathematics and Mechanics, 34(11), 1349-1360, 2013.
  4. Chang MH. “Decomposition solution for fins with temperature dependent surface heat flux”. International Journal Heat and Mass Transfer, 48(9), 1819-1824, 2005.
  5. Kim S, Huang CH. “A series solution of the non-linear fin problem with temperature dependent thermal conductivity and heat transfer coefficient”. Journal of Physics D Applied Physics, 40(9), 2979-2987, 2007.
  6. Khani F, Raji MA, Nejad HH. “Analytical solutions and efficiency of the nonlinear fin problem with temperaturedependent thermal conductivity and heat transfer coefficient”. Communications in Nonlinear Science Numerical Simulation, 14(8), 3327-3338, 2009.
  7. Arslanturk C. “Simple correlation equations for optimum design of annular fins with uniform thickness”. Applied Thermal Engineering, 25(14-15), 2463-2468, 2005.
  8. Arslanturk C. “Correlation equations for optimum design of annular fins with the temperature dependent thermal conductivity”. Heat and Mass Transfer, 45(4), 519-525, 2009.
  9. Kundu B, Bhanja D. “Performance and optimization analysis of a constructal T-shaped fin subject to variable thermal conductivity and convective heat transfer coefficient”. International Journal of Heat and Mass Transfer, 53(1-3), 254-267, 2010.
  10. Bouaziz MN, Aziz A. “Simple and accurate solution for convective–radiative fin with temperature dependent thermal conductivity using double optimal linearization”. Energy Conversion and Management, 51(12), 2776-2782, 2010.
  11. Kundu B. “Analytic method for thermal performance and optimization of an absorber plate fin having variable thermal conductivity and overall loss coefficient”. Applied Energy, 87, 2243-2255, 2010.
  12. Khani F, Aziz A. “Thermal analysis of a longitudinal trapezoidal fin with temperature-dependent thermal conductivity and heat transfer coefficient”. Communications in Nonlinear Science and Numerical Simulation, 15(3), 590-601, 2010.
  13. Torabi M, Aziz A. “Thermal performance and efficiency of convective-radiative t-shaped fin with temperature dependent thermal conductivity, heat transfer coefficient and surface emiss