Journals / 7tepe Klinik / 2022 / Cilt: 18 - Sayı: 2

Evaluation of color stability of resin composite and CAD/CAM materials with different structures

Farklı yapıdaki rezin kompozit ve CAD/CAM materyallerinin renk stabilitelerinin incelenmesi

Pages
10–19
Publication Date
2022-09-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Microfill, nano-hybrid, na- no-ceramic composites and nano-ceramic hybrid CAD/ CAM block were found more resistant to color change than micro-hybrid and hybrid composites

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim: The aim of this study was to evaluate the effect of coffee and red wine on the color stability of micro-hybrid (G-aenial;- GC), hybrid (Fantasista;Sun Medical), nano-hybrid (Grandio- SO;VoCo), nano-ceramic (CeramX Duo;Dentsply Sirona) and microfill (Metafil CX;Sun Med) resin composites and nano-ce- ramic hybrid CAD/CAM material (Grandio Blocs;VoCo).
📊
Key Findings & Data:Material and Methods: Samples (8x2mm) were prepa- red from five different resin composites and nano-ceramic hybrid CAD/CAM samples (10x2x2mm) were prepared by cutting from blocks (n=30).
💡
Conclusion & Impact:Microfill, nano-hybrid, na- no-ceramic composites and nano-ceramic hybrid CAD/ CAM block were found more resistant to color change than micro-hybrid and hybrid composites
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Aim: The aim of this study was to evaluate the effect of coffee and red wine on the color stability of micro-hybrid (G-aenial;- GC), hybrid (Fantasista;Sun Medical), nano-hybrid (Grandio- SO;VoCo), nano-ceramic (CeramX Duo;Dentsply Sirona) and microfill (Metafil CX;Sun Med) resin composites and nano-ce- ramic hybrid CAD/CAM material (Grandio Blocs;VoCo). Material and Methods: Samples (8x2mm) were prepa- red from five different resin composites and nano-ceramic hybrid CAD/CAM samples (10x2x2mm) were prepared by cutting from blocks (n=30). The initial L*a*b* values were measured by spectrophotometer. Each group was ran- domly divided into 3 subgroups as artificial saliva (cont- rol), coffee and red wine (n=10). Control group was stored in artificial saliva while experimental groups were immer- sed in solutions for 6 hours and kept in artificial saliva for 18 hours. Values were re-measured after 1-week and 2-week. Color change was calculated with CIEL*a*b* (ΔE) and CIEDE2000 (ΔE00) formulas. Statistical analyses were performed by paired samples t-test, two-way ANO- VA and post hoc Tukey test (α=0.05). Results: While there was no perceptible discoloration in all materials in control group, significant changes were observed in red wine after one week and in both red wine and coffee after two weeks. The highest ΔE values in cof- fee solution were found in Fantasista, and in red wine Fan- tasista and G-aenial (p<0.05). Conclusion: : While staining beverages caused discolo- ration above clinically acceptable limits on different types of resin composites, red wine was the beverage affected the color stability the most. Microfill, nano-hybrid, na- no-ceramic composites and nano-ceramic hybrid CAD/ CAM block were found more resistant to color change than micro-hybrid and hybrid composites

Özet

Amaç: : Bu in vitro çalışmanın amacı kahve ve kırmızı şara- bın mikro-hibrit (G-aenial;GC), hibrit (Fantasista;Sun Med.), nano-hibrit (GrandioSO;VoCo), nano-seramik (CeramX Duo;- Dentsply Sirona) ve mikrofil (Metafil CX;Sun Medikal) yapıdaki rezin kompozit materyalleri ile nano-seramik hibrit CAD/CAM (Grandio Blocs;VoCo) materyalinin renk stabilitesi üzerine et- kisini incelemektir. Gereç ve Yöntem: SÇalışmada beş farklı rezin kompozit ma- teryalinden metal kalıplar kullanılarak 8x2 mm boyutlarında 30’ar örnek hazırlandı. Nano-seramik hibrit CAD/CAM örnek- leri ise bloklardan kesilerek (10x2x2mm) elde edildi (n=30). Tüm örneklerin başlangıç L*a*b* değerleri spektrofotomet- reyle ölçüldü ve her bir materyal grubu rastgele yapay tükü- rük (kontrol), kahve ve kırmızı şarap olmak üzere 3 gruba ayrıl- dı (n=10). Kahve ve kırmızı şarap örnekleri 6 saat solüsyonda ve 18 saat yapay tükürükte, kontrol grubundaki örnekler ise 24 saat yapay tükürükte bekletildi. 1. ve 2. haftaların sonun- da örneklerin L*a*b* ölçümleri tekrarlandı. Renk değişimi CIEL*a*b* (ΔE) ve CIEDE2000 (ΔE00) renk değerlendirme sistemlerine göre değerlendirildi. Sonuçlar istatistiksel olarak bağımlı örneklem t-testi, iki yönlü varyans analizi ve post hoc Tukey testi kullanılarak karşılaştırıldı (α=0,05). Bulgular: Tüm materyallerde, kontrol grubunda gözle algı- lanabilir düzeyde renklenme görülmezken, 1. hafta sonunda kırmızı şarapta, 2. hafta sonunda ise kırmızı şarap ve kahve- de belirgin düzeyde renk değişimi gözlendi. 2. hafta sonunda kahve solüsyonunda istatistiksel olarak en yüksek ΔE değer- leri Fantasista'da, kırmızı şarapta ise Fantasista ve G-aenial’da saptandı (p<0,05). Sonuç(lar): Renklendirici içecekler farklı yapıdaki rezin kom- pozit materyallerinde klinik olarak kabul edilebilir sınırların üs- tünde renk değişimine neden olurken kırmızı şarap renk stabi- litesini en fazla etkileyen içecek olmuştur. Mikrofil, nano-hibrit, nano-seramik kompozitler ve nano-seramik hibrit CAD/CAM blok, renk stabilitesi açısından mikro-hibrit ve hibrit kompozit- lere göre daha başarılı bulunmuştur.

🔖

Cite This Article

Başaran, E. T., Dikici, B., Can, E. (2022). Evaluation of color stability of resin composite and CAD/CAM materials with different structures. 7tepe Klinik, Cilt: 18 - Sayı: 2, 10–19. https://ajindex.com/articles/426028

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Soares-Geraldo D, Scaramucci T, Steagall WJ, Braga SRM, Sobral MAP. Interaction between staining and deg- radation of a composite resin in contact with colored fo- ods. Braz Oral Res 2011; 25(4): 369-375
  2. Mundim FM, Garcia L, Pires de Souza F. Effect of stai- ning solutions and repolishing on color stability of direct composites. J Appl Oral Sci 2010; 18(3): 249-254
  3. Vichi A, Ferrari M, Davidson CL. Color and opacity vari- ations in three different resin-based composite products after water aging. Dent Mater 2004; 20(6): 530-534
  4. Ritter AV. Direct resin-based composites: current re- commendations for optimal clinical results. Compend Contin Educ Dent 2005; 26(7): 481-482
  5. Moszner N, Salz U. New developments of polymeric dental composites. Prog Polym Sci 2001; 26(4): 535-576
  6. Lee YK, Yu B, Lim HN, Lim JI. Difference in the color sta- bility of direct and indirect resin composites. J Appl Oral Sci 2011; 19(2): 154-160
  7. Koller M, Arnetzl GV, Holly L, Arnetzl G. Lava ultimate resin nano ceramic for CAD/ CAM: customization case study. Int J Comput Dent 2012; 15(2): 159-164
  8. Stawarczyk B, Liebermann A, Eichberger M, Güth JF. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2015; 55: 1-11
  9. Omata Y, Uno S, Nakaoki Y, Tanaka T, Sano H, et.al. Sta- ining of hybrid composites with coffee, oolong tea, or red wine. Dent Mater J 2006; 25(1): 125-131
  10. Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, et.al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015; 27 Suppl 1: S1-S9
  11. CIE (Commission Internationale de l Eclairage). Colo rimetry Technical Report, 3rd Ed. CIE Pub. No 15.; 2004
  12. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, et.al. Color difference thresholds in dental ceramics. J Dent 2010; 38 Suppl 2: e57-e64
  13. Yap AUJ, Lim LY, Yang TY, Ali A, Chung SM. Influence of dietary solvents on strength of nanofill and ormocer composites. Oper Dent 2005; 30(1): 129-133
  14. White DJ. Reactivity of fluoride dentifrices with arti- ficial caries. I. Effects on early lesions: F uptake, surface hardening and remineralization. Caries Res 1987; 21(2): 126-140
  15. Nasim I, Neelakantan P, Sujeer R, Subbarao CV. Co- lor stability of microfilled, microhybrid and nanocompo- site resins--an in vitro study. J Dent 2010; 38 Suppl 2: e137-e142
  16. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, et.al. A long-term laboratory test on stai