SavedAdd your journal

Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2018 / Cilt: 24 - Sayı: 4

The effect of hot dip galvanizing process on the fatigue properties of hot rolled and quenched-tempered AISI 4340 steel

Sıcak daldırma galvanizleme işleminin ıslah edilmiş ve edilmemiş AISI 4340 çeliğinin yorulma dayanımına etkisi

Şule Yıldız ŞİRİN
Pages
626–634
Publication Date
2018-08-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Although the decrease in fatigue strength after galvanization is higher in QT steel, the positive contribution to fatigue resistance of the quenched and tempered process still continues.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effects of hot dip galvanizing treatment on the fatigue strength of the hot rolled and quenched-tempered AISI 4340 steel were examined.
📊
Key Findings & Data:While the reduction in surface roughness of the part due to the high surface tension of the liquid zinc after galvanization has a positive effect, the decrease in the surface hardness due to the low hardness of the zinc and the decrease in the fatigue resistance are adversely affected.
💡
Conclusion & Impact:Although the decrease in fatigue strength after galvanization is higher in QT steel, the positive contribution to fatigue resistance of the quenched and tempered process still continues.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sıcak daldırma galvanizleme · Yorulma dayanımı · Galvaniz kaplama yapısı

Abstract

In this study, the effects of hot dip galvanizing treatment on the fatigue strength of the hot rolled and quenched-tempered AISI 4340 steel were examined. The phase structure, phase thicknesses, surface hardness and roughness values of the galvanized coating were also examined. While the reduction in surface roughness of the part due to the high surface tension of the liquid zinc after galvanization has a positive effect, the decrease in the surface hardness due to the low hardness of the zinc and the decrease in the fatigue resistance are adversely affected. The surface hardness, surface roughness, coating thicknesses and the morphologies of constituent phases of coating obtained in both groups are similar, irrespective of the treatments seen before galvanizing the AISI 4340 steel. Although the decrease in fatigue strength after galvanization is higher in QT steel, the positive contribution to fatigue resistance of the quenched and tempered process still continues.

Özet

Bu çalışmada ıslah edilmemiş ve ıslah edilmiş AISI 4340 çeliğine uygulanan sıcak daldırma galvanizleme işleminin yorulma dayanımına etkisi incelenmiştir. Ayrıca galvaniz kaplamanın faz yapısı, fazların kalınlıkları ile yüzey sertlik ve pürüzlülük değerleri de çalışılmıştır. Galvanizleme sonrası, sıvı çinkonun yüksek yüzey gerilimi nedeniyle parçanın yüzey pürüzlülüğü azalması olumlu etki iken, çinkonun düşük sertliği nedeniyle yüzey sertliğinin azalması ve yorulma dayanımındaki düşüş olumsuz etkileridir. AISI 4340 çeliğine galvanizleme öncesi görmüş olduğu ıslah işlemlerinden bağımsız olarak, her iki grupta elde edilen yüzey sertlik, yüzey pürüzlülük, kaplama kalınlıkları ve kaplamayı oluşturan fazlar benzerdir. Galvanizleme sonrası yorulma dayanımındaki düşüş ıslah edilmiş, yüksek dayanımlı çelikte daha yüksek olsa da ıslah işleminin yorulma dayanımına olumlu katkısı halen devam etmektedir.

🔖

Cite This Article

ŞİRİN, Ş. Y. (2018). The effect of hot dip galvanizing process on the fatigue properties of hot rolled and quenched-tempered AISI 4340 steel. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 24 - Sayı: 4, 626–634. https://ajindex.com/articles/42329

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Marder AR. “The metallurgy of zinc-coated steel”. Progress in Materials Science, 45(3), 191-271, 2000.
  2. Carpio J, Casado JA., A´lvarez JA, Gutie´rrez-Solana F. “Environmental factors in failure during structural steel hot-dip galvanizing”. Engineering Failure Analysis, 16(2), 585-595, 2009.
  3. Reumont G, Vogt JB, Iosta A, Foct J. “The effects of a FeZn intermetallic-containing coating on the stress corrosion cracking behaviour of a hot-dip galvanized steel”. Surface and Coatings Technology, 139(2-3), 265-271, 2001.
  4. Petit EJ, Grosbety Y, Aden-Ali S, Gilgert J, Azari Z. “Microstructure of the coating and mechanical properties of galvanized chromium-rich martensitic steel”. Surface & Coatings Technology, 205(7), 2404-2411, 2010.
  5. Nilson T, Engberg G, Trogen H. “Fatigue properties of hot-dip galvanized steels”. Scandinavian Journal of Metallurgy, 18(4), 166-175, 1989.
  6. Carlos Camurri P, Rau´ l Benavente G, Isidoro Roa S, Claudia Carrasco C. “Deformation and fatigue behaviour of hot dip galvanized coatings”. Materials Characterization, 55(3), 203- 210, 2005.
  7. Asgari H, Toroghinejad MR, Golozar MA. “Effect of coating thickness on modifying the texture and corrosion performance of hot-dip galvanized coatings”. Current Applied Physics, 9(1), 59-66, 2009.
  8. Abotani K, Hirohata K, Kiyasu T. “Hot-Dip Galvanized Sheet Steel with Excellent Press Formability and Surface Quality for the Automotive Panels”. Kawasaki Steel Technical Report, No. 48, March 2003.
  9. Shukla SK, Saha BB, Triathi BD, Avtar R. “Effect of Process Parameters on the Structure and Properties of Galvanized Sheets”. Journal of Materials Engineering and Performance, 19(5), 650-655, 2010.
  10. Bicao P, Jianhua W, Xuping S, Zhi L, Fucheng Y. “‘Effects of zinc bath temperature on the coatings of hot-dip galvanizing”. Surface & Coatings Technology, 202(9), 1785-1788, 2008.
  11. Culcasi JD, Sere PR, Elsner CI, Di Sarli AR. “Control of the growth of zinc-iron phases in the hot-dip galvanizing process”. Surface and Coatings Technology, 122(1), 21-23, 1999.
  12. Ben nasr J, Snoussi A, Bradai C, Halouani F. “Optimization of hot-dip galvanizing prcoess of reactive steels: Minimizing zinc consumption without alloy additions”. Materials Letters, 62(19), 3328-3330, 2008.
  13. Ben nasr J, Snoussi A, Bradai C, Halouani F. “Effect of the withdrawal speed on the thickness of the zinc layer in hot dip pure zinc coatings”. Materials Letters, 62(14), 2150-2152, 2008.
  14. Katiforis N, Papadimitriou G. “Influence of copper, cadmium and tin additions in the ga