Journals / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 1

Band Gap Engineering of ZnO Nanocrystallites Prepared via Ball-Milling

Pages
89–94
Publication Date
2022-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This behavior was explained by the surface states and energy traps on the band edge, created by delocalization of molecular orbitals.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Zinc oxide (ZnO) nanostructures have become the foremost prevalent metal oxide materials for technological applications due to their tunable optical properties.
📊
Key Findings & Data:The crystallite size of the ZnO samples were determined in the range of 24.9 – 22.0 nm depending on the dry milling time.
💡
Conclusion & Impact:This behavior was explained by the surface states and energy traps on the band edge, created by delocalization of molecular orbitals.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:bang gap engineering · dry-milling · zinc oxide

Abstract

Zinc oxide (ZnO) nanostructures have become the foremost prevalent metal oxide materials for technological applications due to their tunable optical properties. However, a simple, cheap and green method is required for the mass production of these nanostructures. In the present investigation ball-milling technique was used to tune the band gap of ZnO nanocrystallites. Samples were synthesized using metallic Zn powder and distilled water via wet-milling followed by dry-milling. The crystallite size of the ZnO samples were determined in the range of 24.9 – 22.0 nm depending on the dry milling time. UV-vis absorbance measurements and Kubelka-Munk theory were used to calculate the band gap of the ZnO nanocrystallites. The energy band gap of the samples was successfully tuned in the range of 3.15 - 3.02 eV depending on the nanocrystallite size. This behavior was explained by the surface states and energy traps on the band edge, created by delocalization of molecular orbitals.

Özet

Zinc oxide (ZnO) nanostructures have become the foremost prevalent metal oxide materials for technological applications due to their tunable optical properties. However, a simple, cheap and green method is required for the mass production of these nanostructures. In the present investigation ball-milling technique was used to tune the band gap of ZnO nanocrystallites. Samples were synthesized using metallic Zn powder and distilled water via wet-milling followed by dry-milling. The crystallite size of the ZnO samples were determined in the range of 24.9 – 22.0 nm depending on the dry milling time. UV-vis absorbance measurements and Kubelka-Munk theory were used to calculate the band gap of the ZnO nanocrystallites. The energy band gap of the samples was successfully tuned in the range of 3.15 - 3.02 eV depending on the nanocrystallite size. This behavior was explained by the surface states and energy traps on the band edge, created by delocalization of molecular orbitals.

🔖

Cite This Article

ŞİMŞEK, T., CEYLAN, A., AŞKIN, G. Ş., ÖZCAN, Ş. (2022). Band Gap Engineering of ZnO Nanocrystallites Prepared via Ball-Milling. Politeknik Dergisi, Cilt: 25 - Sayı: 1, 89–94. https://ajindex.com/articles/422237

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Rasmussen J.W., Martinez E., Louka P. and Wingett D.G., “Zinc oxide nanoparticles for selective destruction of tumor cells and potential for drug delivery applications”, Expert Opinion on Drug Delivery, 7: 1063–1077, (2010
  2. Xiong H.M., Xu Y., Ren Q.G. and Xia Y.Y., “Stable Aqueous ZnO@Polymer Core−Shell Nanoparticles with Tunable Photoluminescence and Their Application in Cell Imaging”, Journal of American Chemical Society, 18: 7522-3, (2008
  3. Pan Z.Y., Liang J., Zheng Z.Z, Wang H.H. and Xiong H.M., “The application of ZnO luminescent nanoparticles in labeling mice”, Contrast Media & Molecular Imaging, 6: 328–30, (2011
  4. Singh S.P., “Multifunctional magnetic quantum dots for cancer theranostics”, Journal of Biomedical Nanotechnology, 7: 95–7, (2011
  5. Hong H., Shi J., Yang Y., Zhang Y., Engle J.W., Nickles R.J., Wang X. And Cai W., “Cancer-Targeted Optical Imaging with Fluorescent Zinc Oxide Nanowires”, Nano Letters, 11: 3744–50, (2011
  6. Wang X., Summers C. J. and Wang Z.L., “Large-scale hexagonal-patterned growth of aligned ZnO nanorods for nano-optoelectronics and nanosensor arrays”, Nano Letters, 4: 423–426, (2004
  7. Huang M.H., Mao S., Feick H., Yan H., Wu Y., Kind H., Weber E., Russo R. and Yang P., “Room-Temperature Ultraviolet Nanowire Nanolasers”, Science, 292: 1897-1899, (2001
  8. Ko Y.H. and Yu J.S., “Urchin-aggregation inspired closely-packed hierarchical ZnO nanostructures for efficient light scattering”, Optics Express, 27: 25935-25943, (2011
  9. Wang X., Summers C.J. and Wang Z.L.,” Large-Scale Hexagonal-Patterned Growth of Aligned ZnO Nanorods for Nano-optoelectronics and Nanosensor Arrays”, Nano Letters, 4: 423-6, (2004
  10. Singh P. and Nanda A., “Enhanced sun protection of nano-sized metal oxide particles over conventional metal oxide particles: an in vitro comparative study”, International Journal of Cosmetic Science, 36: 273-83, (2014
  11. Iwasaki T., Satoh M., Masuda T. And Fujita T., “Powder design for UV-attenuating agent with high transparency for visible light”, Journal of Materials Science, 35: 4025-4029, (2000
  12. Zhou H., Li J., Bao S., Li J., Liu X. and Jin P., “Use of ZnO as antireflective, protective, antibacterial, and biocompatible multifunction nanolayer of thermochromic VO2 nanofilm for intelligent windows”, Applied Surface Science, 363: 15, 532–542, (2016
  13. Lee Y.J., Ruby D.S., Peters D.W., McKenzie B.B. and Hsu J.W.P., “ZnO nanostructures as efficient antireflection layers in solar cells”,