This paper also stresses the advantages of adopting this technology in quarries and mines and provides examples of researches that have demonstrated the superiority of TLS systems over the traditional scanning methods in terms of practicability, reliability and accuracy in numerous mining engineering applications such as deformation measurements, rock fall and landslide control, volume calculations and detection of discontinuities.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:This study investigates in depth Terrestrial Laser Scanning technology (TLS), its working and measurement principle, 3D Terrestrial Laser Scanning softwares and the advantages of this scanning method.
📊
Key Findings & Data:This study investigates in depth Terrestrial Laser Scanning technology (TLS), its working and measurement principle, 3D Terrestrial Laser Scanning softwares and the advantages of this scanning method.
💡
Conclusion & Impact:This paper also stresses the advantages of adopting this technology in quarries and mines and provides examples of researches that have demonstrated the superiority of TLS systems over the traditional scanning methods in terms of practicability, reliability and accuracy in numerous mining engineering applications such as deformation measurements, rock fall and landslide control, volume calculations and detection of discontinuities.
This study investigates in depth Terrestrial Laser Scanning technology (TLS), its working and measurement principle, 3D Terrestrial Laser Scanning softwares and the advantages of this scanning method. This paper also stresses the advantages of adopting this technology in quarries and mines and provides examples of researches that have demonstrated the superiority of TLS systems over the traditional scanning methods in terms of practicability, reliability and accuracy in numerous mining engineering applications such as deformation measurements, rock fall and landslide control, volume calculations and detection of discontinuities.
KEKEÇ, B., BİLİM, N., KARAKAYA, E., GHİLOUFİ, D. (2021). Applications of Terrestrial Laser Scanning (TLS) in Mining: A Review. Türkiye Lidar Dergisi, Cilt: 3 - Sayı: 1, 31–38. https://ajindex.com/articles/421104
Abellán A, Vilaplana J M & Martínez J (2008). Application of a long-range terrestrial laser scanner to a detailed rockfall study at Vall de Núria (Eastern pyrenees, Spain), Eng Geol 88, 136-148. Aksoy H & Ercanoglu M (2006). Determination of the rockfall source in an urban settle-ment area by using a rule-based fuzzy evaluation. Natural Hazards and Earth System (6), 941–954.
Bauer A, Paar G & Kaltenböck A (2005). Mass movement monitoring using terrestrial laser scanner for rock fall management. In: Proc first international symposium on geo-information for disaster management, 393-406.
Bazarnik M (2018) Slope stability monitoring in open pit mines using 3D terrestrial laser scanning, 4th International Conference on Applied Geophysics, E3S Web of Conferences 66, 01020 Bieniawski Z T (1989). Engineering Rock Mass Classification. John Wiley and Sons, New York, 1989. Boehler W & Marbs A (2002). 3d Scanning instruments. Proceeding of the CIPA WG6 International Workshop on Scanning for Cultural Heritage Recording. Chun-Lei, Luo, et al., (2019). Intelligent Detection for Tunnel Shotcrete Spray Using Deep Learning and LiDAR. IEEE Access (8), 1755-1766.
Decker J (2008). Laser scanning techniques in Devil’s Slide tunnels. In: Proceedings of the 42nd US rock mechanics symposium, San Francisco. Delaloye D, Hutchinson J & Diederichs M (2011). Accuracy issues associated with Lidar scanning for tunnel deformation monitoring. Proceedings of the 2011 Pan-AM CGS Geotechnical Conference. Deliormanlı A H, Maerz N & Otoo J N A (2014). Using terrestrial 3D laser scanning and optical methods to determine orientations of discontinuities at a granite quarry, International Journal of Rock Mechanics and Mining Sciences, (66), 41–48. Engin İ C & Maerz N (2016). Patlatma Sonuçlarının Analizinde Yersel Lazer Tarayıcıların (LiDAR) Kullanımı. Bilimsel Madencilik Dergisi, 55(1), 35-44.
Fasching A, Gaich A & Schubert W (2001). Data acquisition in Engineering Geology. An Improvement of Acquisition Methods for Geotechnical Rock Mass Parameters, Felsbau, 19, (5), 93-101. Fekete S & Diederichs M (2013). Integration of three-dimensional laser scanning with discontinuum modelling for stability analysis of tunnels in blocky rock masses. International Journal of Rock Mechanics & Mining Sciences, (57), 11–23.
Fekete S, Diederichs M & Lato M (2009). Geotechnical application of lidar scanning in tunnelling. 3rd CANUS Rock Mechanics Symposium, Toronto. 1-12.