Journals / Sigma Mühendislik ve Fen Bilimleri Dergisi / 2019 / Cilt: 37 - Sayı: 4

DESIGN AND DEVELOPMENT OF A HIGH GAIN DISCONE ANTENNA FOR 4G LTE APPLICATIONS

Pages
1087–1096
Publication Date
2019-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Both simulation and measurement results of the proposed antenna design show a matched bandwidth and a return loss of less than -10 dB in the desired operation band of 670 MHz and 2750 MHz. as it can be seen from both simulation and experimental results, the proposed discone antenna design is a suitable solution for broad-band wireless communication applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study offers the design and realization procedure of a broadband monopole antenna for use in communication applications between 670 MHz-2750 MHz. the proposed monopole antenna comprises a low-cost discone antenna which has a relatively high gain value over a wide operation band.
📊
Key Findings & Data:Firstly, the performance of the antenna is studied by changing the value of design parameters.
💡
Conclusion & Impact:Both simulation and measurement results of the proposed antenna design show a matched bandwidth and a return loss of less than -10 dB in the desired operation band of 670 MHz and 2750 MHz. as it can be seen from both simulation and experimental results, the proposed discone antenna design is a suitable solution for broad-band wireless communication applications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Planar monopole antenna · low profile · airborne

Abstract

This study offers the design and realization procedure of a broadband monopole antenna for use in communication applications between 670 MHz-2750 MHz. the proposed monopole antenna comprises a low-cost discone antenna which has a relatively high gain value over a wide operation band. Firstly, the performance of the antenna is studied by changing the value of design parameters. Effect of each design parameter on return loss (S11) and gain characteristic of the antenna design is observed and the optimal design parameters are taken. Both simulation and measurement results of the proposed antenna design show a matched bandwidth and a return loss of less than -10 dB in the desired operation band of 670 MHz and 2750 MHz. as it can be seen from both simulation and experimental results, the proposed discone antenna design is a suitable solution for broad-band wireless communication applications.

🔖

Cite This Article

BELEN, A., ÖRDEK, S., PARTAL, H. P. (2019). DESIGN AND DEVELOPMENT OF A HIGH GAIN DISCONE ANTENNA FOR 4G LTE APPLICATIONS. Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 37 - Sayı: 4, 1087–1096. https://ajindex.com/articles/419109

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Esquius-Morote M, Fuchs B, Zurcher J, Mosig JR. Novel thin and compact H-plane SIW horn antenna. In Antennas and Propagation, IEEE Transactions on Antennas and Propagation;61: 2911-2920, 2013
  2. Liu J, Jackson D, Long Y. Substrate integrated waveguide (SIW) leaky-wave antenna with transverse slots. IEEE Trans on Antennas and Propagation;60:20-29,, Jan 2012
  3. Mahouti P, Belen MA, Güneş F., 2018. Performance Enhancement of a Microstrip Patch Antenna using Substrate Integrated Waveguide Frequency Selective Surface for ISM Band Applications. Microwave and Optical Technology Letters, 60:1160–1164.
  4. Bozzı, M., Georgıadıs, A., Wu, K., “Review of substrate-integrated waveguide circuits and antennas”, IET Microwaves, Antennas and Propagation. vol. 5, no. 8, p. 909–920,2011 [5] Belen M.A., Mahouti P., Çalişkan A., Belen A., 2017."Modeling And Realization Of Cavity-Backed Dual Band SIW Antenna", Applied Computational Electromagnetics Society Journal, Vol.32, Pp.974-978
  5. Mahouti, P., Güneş, F., Belen, M. A., Çalışkan, A., Demirel, S. and Sharipov, Z., 2016. Horn antennas with enhanced functionalities through the use of frequency selective surfaces. Int J RF and Microwave Comp Aid Eng, 26: 287–293. doi:10.1002/mmce.20971 [7] Güneş F, Sharipov Z, Belen MA, Mahouti P., 2017. GSM filtering of horn antennas using modified double square frequency selective surface. Int J RF Microwe Computer Aided Eng., e21136.
  6. Belen, Mehmet A., and Peyman Mahouti. "Realization of Dielectric Sheets for Gain Improvement of Ultra-Wideband Horn Antennas Using 3D Printer Technology." Applied Computational Electromagnetics Society Journal 34.5 (2019)
  7. Belen M.A., Güneş F., Mahouti P., Belen A., 2018. "UWB Gain Enhancement of Horn Antennas Using Miniaturized Frequency Selective Surface", Applied Computational Electromagnetics Society Journal, no.9, pp.997-1002
  8. A. Caliskan, M. A. Belen, P. Mahouti, S. Demirel, F. Günes, 2015. “Design of a Multiband Microstrip Patch Antenna with Defected Ground Structures”, European Microwave Week EUMW 2015, Paris, France
  9. P. Mahouti, F. Güneş, M. A. Belen, A. Çalışkan, and S. Demirel, 2016. Design and Realization of Dual Band Microstrip Monopole Antenna”, MIKON 2016 - 21st International Conference on Microwaves, Radar and Wireless Communications, May 9-11, Krakow POLAND
  10. N. P. Agrawall, G. Kumar, and K. P. Ray, “Wide-band planar monopole antenna,” IEEE Tra