Also, the mechanical properties of Al-GNP materials sintered with different methods such as hot pressing, hot extrusion, and plasma sintering are investigated and compared among themselves.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:Today, due to its lightness and superior properties, the use of Aluminum (Al) materials has increased considerably.
📊
Key Findings & Data:In the production of Powder Metal (PM) or nanomaterials, it is possible to form the materials required by the additives to be added into the main composition.
💡
Conclusion & Impact:Also, the mechanical properties of Al-GNP materials sintered with different methods such as hot pressing, hot extrusion, and plasma sintering are investigated and compared among themselves.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Aluminum · GNP sintering · powder metal
Abstract
Today, due to its lightness and superior properties, the use of Aluminum (Al) materials has increased considerably. In the production of Powder Metal (PM) or nanomaterials, it is possible to form the materials required by the additives to be added into the main composition. When recent studies investigated, it has been seen that the Graphene NanoPlate (GNP) additive improves the mechanical properties of almost all materials. In this review study, the properties of GNP added to Aluminum PM and Nanomaterials are investigated. Also, the mechanical properties of Al-GNP materials sintered with different methods such as hot pressing, hot extrusion, and plasma sintering are investigated and compared among themselves.
AKKAYA, E., ÇAVDAR, U. (2021). INVESTIGATION OF SINTERING CONDITIONS AND THE GNP ADDITIONS ON ALUMINUM COMPACTS. Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 38 - Sayı: 4, 1977–1986. https://ajindex.com/articles/418901
Türkiye Metalurji Mühendisleri Odası, “Alüminyum Raporu”, Metalurji Dergisi, V:137, p.2-4
Awotunde M., Adegbenjo A., Obadele B., Okoro M., Shongwe B., Olubambi P., (2019), Influence of sintering methods on the mechanical properties of aluminium nanocomposites reinforced with carbonaceous compounds: A review, J Mater Res Technol,
Altuner S., Keleşoğlu E., (2012) Production of Y2O3 coated Al2O3 reinforced aluminum matrix composites and the coating interface effects over wettability properties, Sigma Journal of Engineering and Natural Sciences, 30: 252-258
Health and Safety Executive (HSE). (2013). Using Nanomaterials at Work – Including Carbon (CNTs) and Other Biopersistent High Aspect Ratio Nanomaterials (HARNs). Publication HSG272. London: HSE. www.hse.gov.uk/pubns/books/hsg272.pdf (accessed 7 May 2019)
Li, J., Zhang, X., Geng, L., (2019), Effect of heat treatment on interfacial bonding and strengthening efficiency of graphene in GNP/Al composites, Composites: Part A, doi: https://doi.org/10.1016/ j.compositesa.2019.04.010 [6] Rong Y., He H.P., Zhang L., Li N., Zhu Y.C., (2018), Molecular dynamics studies on the strengthening mechanism of Al matrix composites reinforced by graphene nanoplatelets, Computational Materials Science, 153 p.48-56
Scaffaro R. Botta L. Maio A. Mistretta M. Mantia F. (2016), Effect of Graphene Nanoplatelets on the Physical and Antimicrobial Properties of Biopolymer-Based Nanocomposites, Materials (Basel), 9(5): 351
Wei. K., Leng T., Keat Y., Osman H., Rasidi M., (2019), The potential of natural rubber (NR) in controlling morphology in two- matrix epoxy/NR/graphene nano-platelets (GNP) systems. Polymer Testing, 77:105905
Küçükyıldırım B., Akdoğan Eker A., (2012), Comparison of calculated prediction model results with experimental strengths of carbon nantube reinforced aluminum matrix composite materials, Sigma Journal of Engineering and Natural Sciences, 30: 364-373
Alicanoğlu P., Ulusoy Ç., Sponza D., (2017), Effect of Graphene- TiO2 on the photodegradation of olive mill effluent and recovery of Graphene- TiO2, Sigma Journal of Engineering and Natural Sciences, 8 (3), 227-234
Gavas M.Yaşar M. &Aydın M. & Altunpak Y., (2011), Üretim Yöntemleri ve İmalat Teknolojileri, Seçkin Yayıncılık, Ankara, Türkiye, p.205-207, p.240
Nas E. & Gökkaya H. & Sur G. Sıcak Presleme Yöntemi Kullanılarak Kompozit Malzemelerin Üretilebilirliği Üzerine Bir D