Journals / Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 8 - Sayı: 2

Synthesis of Boron Doped ZnO Nanoparticles and Experimental/Theoretical Investigation of Structural, Morphological, Optical Properties

Bor Katkılı ZnO Nanopartiküllerin Sentezi ve Yapısal, Morfolojik, Optik Özelliklerinin Deneysel/Kuramsal İncelenmesi

Pages
1064–1072
Publication Date
2021-12-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

XRD analysis results show that ZnO nanoparticles in wurtzite crystal structure were obtained.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, boron doped ZnO nanoparticles in different molar ratios (% 0, 0.2, 0.5, 1, and 2) were obtained by spray pyrolysis method.
📊
Key Findings & Data:The band gap energy (Eg) was found in the range of 2.98 - 3.14 eV for each sample, and it was observed that the additives increased the band energy.
💡
Conclusion & Impact:XRD analysis results show that ZnO nanoparticles in wurtzite crystal structure were obtained.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Bor Doplu ZnO Nanoparçacık · XRD · Bant Aralığı

Abstract

In this study, boron doped ZnO nanoparticles in different molar ratios (% 0, 0.2, 0.5, 1, and 2) were obtained by spray pyrolysis method. Characterization of pure and doped ZnO nanoparticles was performed by X-ray diffraction (XRD) technique, Scanning Electron Microscopy (SEM) and UV-vis region spectrum. XRD analysis results show that ZnO nanoparticles in wurtzite crystal structure were obtained. The band gap energy (Eg) was found in the range of 2.98 - 3.14 eV for each sample, and it was observed that the additives increased the band energy. In addition, cluster structures consisting of 10 metal and oxygen atoms were optimized by the quasi-experimental/pm6 method, and the theoretical band gap energy was calculated.

Özet

Bu çalışmada, sprey piroliz yöntemi ile farklı molar oranlarda (%0, 0.2, 0.5, 1, ve 2) bor katkılı ZnO nanoparçacıkları elde edilmiştir. Katkısız ve katkılı ZnO nanoparçacıklarının karakterizasyonu, X-ışını kırınımı (XRD) tekniği, yüzey morfolojisi Taramalı Elektron Mikroskobu (SEM) ve optik özellikler ultraviyole-görünür bölge spektrumu ölçülerek yapılmıştır. XRD analiz sonuçları, wurtzite kristal yapıda ZnO nanoparçacıklarının elde edildiğini göstermektedir. Bant aralığı enerjisi (Eg) her bir numune için 2.98 –3.15 eV aralığında bulunmuş ve katkı maddelerinin bant enerjisini artırdığı gözlemlenmiştir. Ayrıca 10 metal ve oksijen atomundan oluşan küme yapıları yarı deneysel/pm6 yöntemi ile optimize edilmiş, kuramsal band boşluğu enerjisi hesaplanmıştır.

🔖

Cite This Article

KAYA, Y., BAYDIR, E., ARAS, Ö. (2021). Synthesis of Boron Doped ZnO Nanoparticles and Experimental/Theoretical Investigation of Structural, Morphological, Optical Properties. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, Cilt: 8 - Sayı: 2, 1064–1072. https://ajindex.com/articles/400404

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Yakuphanoglu, F., Caglar, Y., Ilican, S., & Caglar, M. (2007). The effects of fluorine on the structural, surface morphology and optical properties of ZnO thin films. Physica B: Condensed Matter, 394(1), 86-92 [2] Katusic, S., Albers, P., Kern, R., Petrat, F. M., Sastrawan, R., Hore, S.,. & Gutsch, A. (2006). Production and characterization of ITO-Pt semiconductor powder containing nanoscale noble metal particles catalytically active in dye-sensitized solar cells. Solar energy materials and solar cells, 90(13), 1983-1999. [3] Zaouk, D., Al Asmar, R., Podlecki, J., Zaatar, Y., Khoury, A., & Foucaran, A. (2007). X-ray diffraction studies of electrostatic sprayed SnO2: F films. Microelectronics journal, 38(8-9), 884-887. [4] Gaikwad, R. S., Bhande, S. S., Mane, R. S., Pawar, B. N., Gaikwad, S. L., Han, S. H., & Joo, O. S. (2012). Roughness-based monitoring of transparency and conductivity in boron-doped ZnO thin films prepared by spray pyrolysis. Materials Research Bulletin, 47(12), 4257-4262. [5] Kim, G., Bang, J., Kim, Y., Rout, S. K., & Woo, S. I. (2009). Structural, electrical and optical properties of boron doped ZnO thin films using LSMCD method at room temperature. Applied Physics A, 97(4), 821-828. [6] Bougrine, A., El Hichou, A., Addou, M., Ebothé, J., Kachouane, A., & Troyon, M. (2003). Structural, optical and cathodoluminescence characteristics of undoped and tin-doped ZnO thin films prepared by spray pyrolysis. Materials Chemistry and Physics, 80(2), 438-445. [7] Caglar, Y., Aksoy, S., Ilican, S., & Caglar, M. (2009). Crystalline structure and morphological properties of undoped and Sn doped ZnO thin films. Superlattices and microstructures, 46(3), 469-475. [8] Ahmad, A. A., Alsaad, A. M., Al-Bataineh, Q. M., & Al-Naafa, M. A. (2018). Optical and structural investigations of dip-synthesized boron-doped ZnO-seeded platforms for ZnO nanostructures. Applied Physics A, 124(6), 1-13. [9] Han, L. F., Fu, C. F., Liu, C., Liu, X. B., & Xie, R. H. (2019). Influence of working pressure on the structural, optical and electrical properties of Cr-doped ZnO thin films. Journal of Electronic Materials, 48(5), 3317- 3323. [10] Goktas, A., Tumbul, A., Aba, Z., & Durgun, M. (2019). Mg doping levels and annealing temperature induced structural, optical and electrical properties of highly c-axis oriented ZnO: Mg thin films and Al/ZnO: Mg/p- Si/Al heterojunction diode. Thin Solid Films, 680, 20-30. [11] Alsaad, A. M., Al-Bataineh, Q. M., Ahmad, A. A., Albataine