Journals / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 4

Development of specially reinforced magnesium composites prepared by squeeze casting process

Pages
635–646
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

So it can be inferred that this uniform distribution causes higher hardness and higher tensile strength in the manufactured specimens.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A wide range of opportunities in the field of automotive and structural applications are being offered by Magnesium matrix composites because of their enhanced mechanical properties.
📊
Key Findings & Data:Specimen 1 has a composition of 7 % aluminum alloy in addition to 1% zinc and the composition of reinforcement is Titanium Carbide 0.3 % in addition to 1.5% Carbon nanotubes.
💡
Conclusion & Impact:So it can be inferred that this uniform distribution causes higher hardness and higher tensile strength in the manufactured specimens.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

A wide range of opportunities in the field of automotive and structural applications are being offered by Magnesium matrix composites because of their enhanced mechanical properties. Magnesium alloys based on Metal Matrix Composites (MMCs) are the best candidates for lightweight structural applications due to their improved creep properties. In the present study, three specimens of specially reinforced magnesium composites were manufactured by using the squeeze casting process. Specimen 1 has a composition of 7 % aluminum alloy in addition to 1% zinc and the composition of reinforcement is Titanium Carbide 0.3 % in addition to 1.5% Carbon nanotubes. Specimen 2 has a composition of 12 % aluminum alloy in addition to 1 % zinc and the composition of reinforcement is 2% 𝐵4𝐶 in addition to 2 % Carbon nanotubes. Specimen 3 has a composition of 14 % aluminum alloy in addition to 1 % zinc and the composition of reinforcement is 2 % 𝐵4𝐶 in addition to 2 % Carbon nanotubes. The mechanical properties analysis showed that specimen 2 has a higher hardness value in comparison to other manufactured specimens and it was also observed that specimen 2 possesses a higher tensile strength value in comparison to the other two specimens. Microstructure analysis shows that there was a uniform distribution of the reinforcements in the matrix. So it can be inferred that this uniform distribution causes higher hardness and higher tensile strength in the manufactured specimens.

🔖

Cite This Article

MISHRA, A., DIXIT, D., AL-SABUR, R. (2021). Development of specially reinforced magnesium composites prepared by squeeze casting process. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 4, 635–646. https://ajindex.com/articles/400339

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Kumar S, Singh R, Hashmi MSJ. Metal matrix composite: a methodological review, Advances in Materials and Processing Technologies, 2020; 6:113 - 24.
  2. Bahl S.Fiber reinforced metal matrix composites-a review, Materials Today: Proceedings 2020.
  3. Bhoi NK, Singh H, Pratap S. Developments in the aluminum metal matrix composites reinforced by micro/nano particles-a review, Journal of Composite Materials, 2020; 54:6 813 - 833.
  4. Güler Ö, Bağcı N. A short review on mechanical properties of graphene reinforced metal matrix composites, Journal of Materials Research and Technology, 2020; 9:3 6808 - 6833.
  5. Węglewski W, Pitchai P, Bochenek K, Bolzon G, Konetschnik R, Sartory B, Ebner R, Kiener D, Basista M. Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr (Re)/Al 2 O 3 Metal-Matrix Composite, Metallurgical and Materials Transactions A, 2020; 1 - 14.
  6. Ramesh P, Nataraj M. Automotive industry application of aluminium-based hybrid metal matrix composite, International Journal of Heavy Vehicle Systems, 2020; 27:1-2 18 - 32.
  7. Pandian V, Kannan S. Processing and preparation of aerospace-grade aluminium hybrid metal matrix composite in a modified stir casting furnace integrated with mechanical supersonic vibration squeeze infiltration method, Materials Today Communications, 2020; 101732.
  8. Saleh BI, Ahmed MH. Development of functionally graded tubes based on pure Al/Al 2 O 3 metal matrix composites manufactured by centrifugal casting for automotive applications, Metals and Materials International, 2020; 26:9 1430 - 1440.
  9. Singh H, Kumar D, Singh H, Development of magnesium-based hybrid metal matrix composite through in situ micro, nano reinforcements, Journal of Composite Materials, 2021; 55:1 109 - 123.
  10. Kumar A, Arafath MY, Gupta P, Kumar D, Hussain CM, Jamwal A. Microstructural and mechano-tribological behavior of Al reinforced SiC-TiC hybrid metal matrix composite, Materials Today: Proceedings, 2020; 21: 1417 - 1420.
  11. Dinaharan I, Zhang S, Chen G, Shi