Journals / Turkish Journal of Chemistry / 2002 / Cilt: 26 - Sayı: 5

Electrodeposition of Zinc from Chloride Solution

Pages
725–734
Publication Date
2002-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

IR spectrum of the scratched deposit showed inclusion of addition agent.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath.
📊
Key Findings & Data:The bath constituents are optimized through Hull cell experiments.
💡
Conclusion & Impact:IR spectrum of the scratched deposit showed inclusion of addition agent.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Turk. J. Chem. · (2002) · 725-734. Full text: pdf Other articles published in the same issue: Turk. J. Chem.

Abstract

The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath. The bath constituents are optimized through Hull cell experiments. Operating parameters such as pH, temperature, and current density are also optimized. The current efficiency and throwing power are measured at different current densities. Polarization study is carried out under galvanostatic conditions. Corrosion resistance test indicated good protection of steel by the coating. The consumption of brightener is determined in the laboratory scale. SEM photomicrographs revealed fine-grained structure of the deposit from the optimum bath. IR spectrum of the scratched deposit showed inclusion of addition agent.

Özet

The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath. The bath constituents are optimized through Hull cell experiments. Operating parameters such as pH, temperature, and current density are also optimized. The current efficiency and throwing power are measured at different current densities. Polarization study is carried out under galvanostatic conditions. Corrosion resistance test indicated good protection of steel by the coating. The consumption of brightener is determined in the laboratory scale. SEM photomicrographs revealed fine-grained structure of the deposit from the optimum bath. IR spectrum of the scratched deposit showed inclusion of addition agent.

🔖

Cite This Article

NAIK, Y. A., VENKATESHA, T. V. (2002). Electrodeposition of Zinc from Chloride Solution. Turkish Journal of Chemistry, Cilt: 26 - Sayı: 5, 725–734. https://ajindex.com/articles/397796

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...